Complete the look of your bath with this Decorative ADA Grab Bar. Gracias a Delta, la instalación resulta muy sencilla para los aficionados al bricolaje de fin de semana, ya que se incluye toda la tornillería de montaje e instrucciones de instalación fáciles de entender.
24 " de largo
1 1/4" de ancho
Disponible en cuatro acabados decorativos
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
Escriba un código postal válido.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
Rated 5 out of
5 by
Donna from
Great Attractive Grab BarPerfect size and is a good match for my Delta faucets etc in the bathroom
Date published: 2023-10-24
Rated 5 out of
5 by
Anonymous from
Quality - descriprion - speedProduct is of great quality and exactly as described. Quick shippment. Would repurchase if I need additional bars.
Date published: 2023-08-28
Rated 5 out of
5 by
KZ from
Beautiful and FunctionalBought this large grab bar as a just in case! However, it is not only useful and study -it is quite elegant looking. Finish is lovely.
Date published: 2022-12-17
Rated 5 out of
5 by
TB from
Classy grab barsNice looking grab bars. Antique bronze matched existing fixtures. Sturdy. Amazingly well packaged in flannel bag. Arrived very promptly.
Date published: 2022-02-14
Rated 3 out of
5 by
Anonymous from
Decent grab barBeautiful product as advertised. But cover/trim rings do not stay in place and thickness and weight are only adequate.
Date published: 2022-02-11
Rated 5 out of
5 by
Louise from
Safety Grab Bar - No, 1 Covid Task Completedthe perfect grab bar for my shower in the exact Delta finish used in my Master by my builder.
Date published: 2020-11-20
Rated 5 out of
5 by
Chuck from
Good productEasy install & looks good.
Date published: 2020-11-01
Rated 5 out of
5 by
JD from
ExcellentExcellent product, sturdy, be sure to mount into wood backing, and think about adding an extra one on the opposite side
What is the best method to remove the cover plates on the delta 24 inch ada grab bar.
Asked by: ron
Hi Ron,
Thank you for your question. The cover plates snap into place. You can pry them off by hand or carefully inserting a blade under the cover. Please keep in mind that the portion that meets the wall is not part of the cover and will not pry off.
Best regards,
Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28
Matching grab bars
I have this grab bar as well as the matching one with slide bar for a hand held. I would like some in shorter lengths that match. I ordered 2 Silverton bars from Home Depot but they don't match & the parts that screw into the wall are too big compared with this item. Also, the shorter silverton bar has exposed screws while the little bit longer one has covered screws.
I'd REALLY like things to match! Are they available & I just can't find them?
Please answer quickly as I am remodeling the bathroom this week..
Asked by: Celeste
Thank you for your question. We do offer an 18" grab bar that has concealed mounting. We recommend Delta Faucet model # 41218-ST or 40118-SS.
Answered by: Delta
Date published: 2024-03-28
Are the end brackets permanently attached to the grab bar? Or are they attached with set screws? I want to temporarily remove the end brackets, so that I can cut the bar itself to the exact length needed to mount onto the odd size stud spacing.
Asked by: Steve
Hi, Steve!
Thank you for your question. The Delta 40024 Grab Bar cannot be cut as the ends cannot be removed. We do apologize for any inconvenience this may cause.
Best Regards,
Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28
How are rhese mounted through tile on a hollow wall
Does the bar come with mounting hardware foe mounting on a tile wall when you will not hit a stud
Asked by: gna
Hi gna,
Thank you for your question. This bar must have both ends installed into a wood stud.
Best regards,
Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28
when mounted horizontally, how is it anchored to jousts that are generally 16' on center?
Asked by: tomo
Thank you for your question, tomo! Grab Bars may be installed vertically, horizontally or at an angle, so long as at least two of the three mounting screws on each end of the Grab Bar are secured into a wood stud. Locate the wood studs behind the wall before beginning installation. When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you have questions or need further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com.
Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28
Do you make this same style Grab Bar in an 18" length, 36" length, and 42" length?
Asked by: Steve
Hi, Steve!
Thank you for your question. The Delta 40024 Grab Bar is only available in the 24" length option.
Best Regards,
Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28
Thanks for the answer--but how come Delta makes 18 inch grab bars but not 16 inch ones--there are no house with 18 inch studs
Asked by: tomo
Hi, Tomo!
Thank you for your question. Unfortunately, we do not make grab bars that are 16" in length. Here is a link to our available grab bars:
https://www.deltafaucet.com/bathroom/accessories/grab-bars
Best Regards,
Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28
How do you install this bar? The cover plate does not seem to be removeable.
Asked by: Kate
Hi Kate, Thank you for your question. The cover plate on the model 40024-PB grab bar does come off to allow access to the mounting hardware. Here is a link to the installation manual.
http://www.deltafaucet.com/customersupport/documentation/40024-pb.html?document=mi&fromDetailArea=bath&documentIndex=0#flashWrapper
Thanks,
Dave
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.
ATENCIÓN
Este enlace lo hará salir de la sección Internacional y lo dirigirá a otra página.
