Delta®

Cabina de ducha angular sin marco de 38" en cromado

N.º de modelo: 422061-PC
Delta®
Cabina de ducha angular sin marco de 38" en cromado
N.º de modelo: 422061-PC
Precio de lista: $78470
CARACTERÍSTICAS DEL PRODUCTO
  • Se adapta a la base para ducha de cerramiento angular de 38".
  • Ferretería con acabado de acero inoxidable
  • Paneles y puerta de vidrio templado transparente
  • Puede instalarse con aplicaciones de azulejos
  • Se recomienda usar el limpiacristales Windex® original
  • *Todas las marcas comerciales son propiedad de sus respectivos dueños.
  • Diseñada para encajar en la base para ducha angular de 38" de Delta, modelo n.º 422062, y en las paredes para ducha angulares de 38" de Delta, modelo n.º B67916-3838-WH
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Documentos y especificaciones
Información de instalación
Altura total:
72
Voltaje:
0
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

RESEÑAS
Rated 1 out of 5 by from Leaks at bottom of door Poor design of lower door gasket has been a constant headache would not recommend
Date published: 2024-09-05
Rated 1 out of 5 by from Glass door exploded I bought this shower enclosure in Dec. 2016. It was installed by a licensed contractor. Last week the door exploded for no apparent reason. It made a very loud noise and exploded into pieces all over the inside of the shower and bathroom. Before the door exploded, there was no damage to the door and was used as intended. Luckily, no one was in the bathroom at the time. I contacted Delta and was told that they cannot do anything because it is past the 5 year warranty.
Date published: 2024-06-21
Rated 1 out of 5 by from horrible system Contractor here. Do not purchase this unit, leaks all over. Contacted Delta after install and explained the problem with the hinge side gasket and they sent a replacement-the same piece I had. Called again and after pleading for 40 minutes that something isn't right I was told that I was wrong and that's the piece that fits...it absolutely doesn't. Now I have an irate customer and am stuck trying to find replacement gaskets at my expense. Wasn't able to give less than one star and will never be using Delta on any projects again.
Date published: 2023-12-20
Rated 1 out of 5 by from Junk, sagging door Door was sagging due to poor design (weight on hinges) orignial install was spot on, but the panel pulled out of the wall and shattered. Delta doesn't sell replacement glass parts and the shower isn't compatible with other systems so I'm stuck having to replace the entire shower/base or reinstall this junk. Thanks Delta.
Date published: 2023-10-23
Rated 1 out of 5 by from By far the worst purchase ever made! I wish we never purchased this shower! It started leaking at the bottom of the door, no matter what we do we can’t fix it. We put this shower in for our daughter because she needed hip surgery. I really wish I would have done a little research before purchasing this, but we didn’t have much time to make the bathroom handicap accessible. I don’t know what we are going to do, she needs another surgery and this shower is a fall risk since it leaks. I wish we would have gone with a square base instead so we could use a shower curtain, it would have saved so much grief!! I really hate to waste the money and it hasn’t even been a year yet!! So disappointed and disgusted!
Date published: 2023-09-11
Rated 5 out of 5 by from Room for improvement but nothing serious! My shower setup wasn’t 100% perfect or plum. This shower enclosure conformed to my particular scenario. One thing I would like to see on this shower enclosure is rounded hinge corners and straight installation. Preinstalled hinges were not straight and I was not ready to take them apart and make my job longer/harder…it worked as it was. Lastly, my wife said she found the bottom strip on the bathroom floor one morning. Haven’t seen it for myself yet so I know what to fix. Lastly, I have an active leak but that’s due to the trash caulk I purchased. It is truly pure TRASH, it has nothing to do with the enclosure itself. Overall, it’s a very solid and beautiful enclosure I would buy again. Just make sure you use the template and check your markings more than 3 times.
Date published: 2023-05-23
Rated 1 out of 5 by from Very Disappointed - Shower leaks bc of poor design We purchased and installed the Delta shower base, wall set and glass shower enclosure for the 38-in Neo Angle Shower Kit. We paid a hefty price for all three shower components, and at the time felt we were getting a quality product from Delta - at least a product that had been tested before selling to the public. We painstakingly followed Delta's installation instructions; we applied a mortar base for leveling the shower base, added additional wall studs so the plastic shower encloser would have additional support, we even used the recommended advanced polymer sealants - about 5 or 6 tubes in total. We were very proud of the installation and all of our efforts were about to pay off, at least so we thought. However, after we took the first shower we noticed water collecting outside of the shower in front of the door. To our chagrin, we realized the clear plastic gasket Delta provided for the base of the door is not adequate for keeping water inside this small shower enclosure. The gap at the bottom of glass door and the metal support bracket is about 1/2-in, and the gasket they provided is maybe only suitable for covering a 1/4-in gap. Also, the 45 degree water diverting lip on the gasket is only about 1/2-in long and really needs to be 1-in long to work correctly. Finally, the bottom door gasket has a lip that rests on the outside of the shower door when the door is closed which does not prevent shower water from leaving the enclosure. We called Delta consumer care and they were not very knowledgeable about the shower and could not help us. We are now resorting to Amazon for locate a proper sized door gasket that will keep water inside the shower. Unfortunately, most gaskets are not sized to seal up a 1/2-in gap at the base of the shower door. Don't make the mistake of buying this shower until Delta solves the issue.
Date published: 2023-02-21
Rated 5 out of 5 by from Worked great for me! I bought this enclosure 5 June 2022 mainly because it dimensionally was a great match for my old, pre-existing base. The installation went well. The cardboard cutout was essential to line up the walls and that worked really well. My magnetic door works well - no issues yet anyways. Delta support helped me as well. All in all very happy with the purchase!
Date published: 2022-07-23
  • y_2024, m_9, d_14, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_US, sid_422061-PC, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Preguntas y respuestas

Where are the documents and specs??? I need to know the measurement of the door and stationary glass walls.

Asked by: Robert
Hello Robert, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure. I will be happy to assist you today. The dimensions of the door are 25 1/4" wide x 72" high. The two stationary glass walls are 17 3/4" wide x 72" high. You can view the technical specification sheet for any additional measurements you might need below: https://images.homedepot-static.com/catalog/pdfImages/c6/c67dc9ad-5559-4fd9-9f18-326c68da134c.pdf If you ever have any questions, concerns, or require anything further please feel free to give us a call on our warranty line at 800-345-3358 and we will be happy to assist you in any way that we can. Thank you, Matthew I. Delta Faucet Company Consumer Care
Answered by: Consumer Care
Date published: 2024-03-28

Whjat do I do when I've lost the template for positioning wall brackets

Asked by: BobH
Hi BobH! Thank you for your question. The Delta part number is rp93654. If you would like to order a replacement please call us at 1-800-345-3358. Thanks, Antoine
Answered by: DeltaFaucet7
Date published: 2024-03-28

How thick is the glass?

Asked by: doityourself
Hi doityourself, Thank you for your question. The glass on the model 422061 is 1/4" thick. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

2) The installation manual says to only caulk the outside of the shower, but the installation video shows that you caulk the inside. Which is correct?

Asked by: NH11
Hi, NH11! Thank you for your question. The instruction manual for the Delta 422061 shower unit indicates as follows: "Caulk the outside of the shower enclosure where wall jambs meet the walls, the seam between the stationary panel and wall jamb, the glass meets the base, the glass support meets the base, and the vertical section as shown. Allow sealant to dry and test that enclosure is water tight." Here is a link to the instruction manual for the unit: https://media.deltafaucet.com/MandI/95196%20Rev%20F.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Pan size compatibility for Model # 422061

Will the Model # 422061 fit a pan with centerline dimensions of 17.5 inches by 25 inches by 17.5 inches?
Asked by: sand
Hello Sand, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure.I will be more than happy to assist you. No, that base would not be compatible with the enclosure. We recommend using the 38" neo-angle base that was designed to fit to the doors; the model number is 422062. If you have any further questions please contact us by calling 800-355-2721. Thanks, Sarah Consumer Care Delta Faucet Company
Answered by: Sarah
Date published: 2017-09-02

are there other glass options? some of the frosted glass on other showers would be preferred.

Asked by: Michael
Hi Michael, Thank you for your question about the Delta 38" Frameless Neo Angle Shower Enclosure. Unfortunately this item is only available in clear glass. There are other showers available with a base and wall set, that have textured glass, however these units are framed enclosures. Thanks, Nick
Answered by: DBS2013
Date published: 2024-03-28

What is the distance between the bottom of the door and the bottom glass support? Mine is 1/2" but the door sweep is only 3/8". This causes a lot of water to leak between the door sweep and bottom glass support.

Asked by: Jimm
Hello Jimm, Thank you for your question regarding the Delta 38" Frameless Neo Angle Shower Enclosure. I am very sorry to hear that your enclosure is leaking and I am happy to assist you today. The gasket which attaches to the bottom of the door should touch the support bar, so when the gasket is fully installed, there shouldn't be a gap. Please feel free to submit a full photo of the enclosure as well as a photo of the gap to us via email at consumercare@deltafaucet.com and include your first and last name and telephone number, if we can investigate this issue with you further. If we can assist you with anything else going forward, please do not hesitate to give us a call at 800-355-2721. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

How can I order the door only for the Delta Neo Angle BVS422NCSW

Asked by: Mark
Hi, Mark! Thank you for your question. The Delta 422061 Frameless Shower Enclosure is available exclusively at The Home Depot. We recommend to special order there. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

When installing tile in this item, do you put in the wall supports (in which the glass is installed) before you begin tiling?

Asked by: CB
Hi CB, Thank you for your question about the 38" Frameless Neo Angle Shower Enclosure. You would want to tile the entire enclosure, then once everything has set, begin the installation of the enclosure making sure you pre-drill any holes into the tile to prevent it from cracking. If you have any questions about this, please to hesitate to call us at 800-355-2721 or email us at customercare@mascobath.com. Thanks, Nick
Answered by: DBS2013
Date published: 2024-03-28

How much is a replacement glass door for neo 38 kit ours shattered

Asked by: Teebs
Hello Teebs, Thank you for your inquiry regarding the Delta 38" Frameless Neo Angle Shower Enclosure and I am sincerely sorry to hear that the door for your shower enclosure has shattered. I apologize for the inconvenience this has caused and hope that you are okay. I am happy to assist you today. Was anyone injured due to the glass shattering? Please respond back to the email I sent to you with your contact information and further information regarding the model and I will be happy to help you with resolving this issue where I can. Again, I am very sorry for the inconvenience this has caused and I look forward to hearing back from you and assisting you further with resolving this matter. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

do you have a shower door that: 1. swings both in and out 2. matches the stainless finish 3. is "frameless"

Asked by: rb007
Hi, rb007! Thank you for your question. Unfortunately, we do not have a shower door that swing in and out. Here is a link to the available frameless shower doors: https://www.deltafaucet.com/bathroom/showering/shower-doors-and-enclosures Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does this same shower come in 36"

Asked by: SherryD
Hello SherryD, Thank you for your question regarding the Delta 38" Frameless Neo Angle Shower Enclosure and I am happy to help you today. Unfortunately, this shower enclosure is not available in a 36" dimension at this time and I apologize for any inconvenience this may cause. The only 36" enclosure we currently offer at this time is model B912912-3636-SS, which has a squared base. I apologize for any inconvenience this may cause and if there is anything going forward that we may be able to help with, please do not hesitate to give us a call on our warranty line at 800-355-2721 and we will be happy to help you where we can. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

Hello, I am also having the same leaking issues that Alli and Carol asked about. My shower is only leaking from the bottom corner the door is attached to. Could you please help? 

Asked by: elli
Hello elli, Thank you for your question regarding the Delta 38" Frameless Neo Angle Shower Enclosure. I am very sorry to hear that your enclosure is leaking and I am happy to assist you today. At your earliest convenience, please respond back to the email I sent to you with a full photo of the enclosure, displaying the unit from top to bottom as well as a few photos of the base after you have run water through the unit and we will be happy to investigate this issue with your further to reach a resolution. There are many factors to consider when a shower enclosure is leaking, such as the type of sealant and adhesive that was used during installation, if the sealant was pressed completely into the joints of the surround, base and enclosure to get a tight seal and whether or not the unit is fully plumb and level. One very common issue with a leaking enclosure is when 100% silicone based sealant is used to seal the surround, base and enclosure, as this sealant has a very high shrinkage factor over a short period of time. We recommend using an advanced polymer sealant which is safe for use on polystyrene/acrylic materials and intended for kitchens, bathrooms and surrounds, such as the three brands below: DAP® 3.0™ Kitchen, Bath & Plumbing High Performance Sealant Red Devil® RD3000™ Advanced Kitchen & Bath Sealant ECO-BOND® Kitchen-Bath-Plumbing Adhesive and Sealant If you wish to give us a call on our warranty line after sending in your photos, please give us a call at 800-355-2721. I hope to hear back from you soon! Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Brandy
Date published: 2024-03-28

Can I get a new door sweep and hing gasket?

Asked by: Mike
Thank you for your question, Mike. The door sweep and gaskets are included in part number RP78934. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP78934 Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Two questions: 1) Do the glass walls insert into the wall jambs, or go around them. The wording on the installation manual says to insert them, but the picture shows that they go around the jambs.

Asked by: NH11
Hi, NH11! Thank you for your question. The Delta 422061 glass wall inserts go into the wall jambs for the unit. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

substituting a larger stationary glass panel

Hello, We would like use the 38" Frameless Neo Angle Shower enclosure for a space that will require a wider panel for one of the sides (not the hinged side). From what I see if we were to get 1/4" tempered glass from a local glass shop with the holes drilled as they are in the panel provided in the kit then the other parts in the kit could be utilized. I understand this is not recommended use and not warrantied. Is there anything else we should do to make this work?
Asked by: Pat
Hi Pat, Thank you for your question about the Delta 38" Frameless Neo Angel Shower Enclosure. This is something we would not recommend or be able to cover under warranty. The biggest concern we can see is making sure the panel is attached and sealed to the aluminum profile properly ensuring there is proper support. The aluminum profile would have to be removed from the existing panel and attached onto the other panel, which will be difficult to do. Thanks, Nick
Answered by: DBS2013
Date published: 2024-03-28

How do I buy a new magnetic door strip for this model shower. It is warped since new and the door doesn't close properly.

Asked by: David
Hello David, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure and I am happy to help you with replacing the magnetic strip for your enclosure today. Please refer to the email I sent to you regarding this issue and I will be happy to assist you further. Please feel free to give us a call if we can help with absolutely anything else at 800-355-2721. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Sarah
Date published: 2024-03-28

Does the base for this kit come in bone color?

Asked by: Debbie
Hello Debbie, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure on HomeDepot.com: "Does the base for this kit come in bone color?" I will be more than happy to assist you today and I apologize for any inconvenience, at this time we do not offer this shower base in a bone finish. All of our shower bases, bath tubs and bases included with our shower enclosures are only available in a high gloss white. If there is anything further we can assist you with, please do not hesitate to email or give us a call at 800-355-2721. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Sarah
Date published: 2024-03-28

Is there any way to restrict how far the door can be opened?

I'm looking to install this in a small bathroom and if the were to be opened the full 180 degrees it would hit the other fixtures in the room.
Asked by: Remodeler33
Hello Remodeler33, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure. I will be more than happy to help. No, we do not have a way to restrict the door opening. If you need anything further please contact us by calling 800-355-2721. Thanks, Sarah Consumer Care Delta Faucet Company
Answered by: Sarah
Date published: 2017-11-25

Can this be installed on a tiled wall AND using the Delta Neo Angle base?

Asked by: asianfreckles
Hi asianfreckles, Thank you for your question. The model 422061 can be installed on a tiled wall. The 422063 base is made to install to the drywall, you cannot install the base over tile. This is a fairly normal installation, your wall tile will run down over the nailing flange of the base, but not behind the base. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Installation of wall jams

Illustration 5 is very clear about the installation of the wall jams. Illustration 19 and 20 give instructions for connecting wall jam extenders but I don't see 'extenders' in the parts list. What are they for since it seems that the installation is complete by the time I get to 19.
Asked by: mickeyrory
Hi mickeyrory, Thank you for your question about the Delta 38" Frameless Neo Angle Shower Enclosure. The wall jamb extenders are the metal part that is attached to the glass that fits over the wall jambs. They are used to keep the glass from coming away from the wall. Thanks, Nick
Answered by: DBS2013
Date published: 2024-03-28

What size are the side panels

i have seen delta say it was 17 13/16 then other posts they say its 19 9/16th. What one is it? Thanks
Asked by: nathanr
Hi nathanr, Thank you for your question about the Delta 38" Frameless Neo Angle Shower Enclosure. The size of the stationary glass panels from the wall to the end of the panel is 17 13/16 inches. Thanks, Nick
Answered by: DBS2013
Date published: 2016-11-21

What is the part #'s of the wall surround and the base for the #422061 shower enclosure?

Asked by: John
Hi, John. Thank you for your question. The Delta 422061 38" Frameless Neo Angle Shower Enclosure is designed to fit 38 in. neo angle shower base Delta model #422062 and 38 in. neo angle shower walls Delta model #422060. Here are links to these models: https://www.deltafaucet.com/bathroom/product/422062 https://www.deltafaucet.com/kitchen/product/422060 Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the door open from the left?

Asked by: Shipleyc
Hi Shipleyc, Thank you for your question about the Delta 38" Frameless Neo Angle Shower Enclosure. The door can open from the other side. To do this, it is stated in the install manual, but the left stationary panel would be installed on the right, and the right stationary panel would be installed on the left, then the door would be installed upside down. Thanks, Nick
Answered by: DBS2013
Date published: 2024-03-28

Getting the hinges straight and square relative to the panel

The hinges come with only half as many plastic bushings (if that is the right term) to fit inside the glass holes. It seems that this may be responsible for my hinges to be aligned a bit crooked, once the door is attached. Are there supposed to be plastic bushings for each hole? If not, are there any suggestions as to how to ensure the hinges are straight once everything is installed?
Asked by: mdrake
Hello mdrake, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure. I will be more than happy to assist you and I do apologize for the inconveniences you have been faced with. Yes, there should be a one gasket for each hinge. If you could please give us a call at 800-355-2721 we can walk you through the steps to ensure the hinges are straight. Thanks, Sarah Consumer Care Delta Faucet Company
Answered by: Sarah
Date published: 2017-08-31

What should be the base dimensions for this enclosure?

I am building a neo angle tiled base and need the dimensions so the 38" shower enclosure 422061 will fit it. Can I use the specs for your 38" base 422062? Thanks.
Asked by: Bobvy
Hi Bobvy, Thank you for your question about the Delta 38" Frameless Neo Angle Enclosure. The 422062 base is recommended to be used with the 422061, so those specs will be the ones you would want to use. Thanks, Nick
Answered by: DBS2013
Date published: 2016-08-30

Hi, i am looking for a replacement door for this item, as one hinge became loose, then the entire door shattered. I am not looking to purchase the whole enclosure, just the door, and handle. Where can I get it?

Asked by: Mike
Hello Mike, Thank you for your question regarding the Delta 38" Frameless Neo Angle Shower Enclosure. I will be happy to assist you today. I am very sorry to hear that your door shattered as a result of a hinge becoming loose on your shower door, and I apologize for any inconveniences this may have caused. Please refer to the email that I have sent to you regarding this issue and we will be happy to assist you in any way that we can. Thank you again! Matthew Delta Faucet Company Consumer Care
Answered by: Delta Faucet
Date published: 2024-03-28

on model 422061 I would like to knoe the correct position of the sweep. Does the long edge of the sweep go to the inside or outside of the door?

Asked by: Jude
Thank you for your question, Jude! You would need to trim the long edge of the sweep, to be flat on the end that touches the magnetic door gasket. Attach door sweep to bottom of glass door. Make sure that the end of the door sweep touches the magnetic gasket. I have included a link to the maintenance and installation sheet, for you to refer to. https://media.deltafaucet.com/MandI/95196%20Rev%20G.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

I need a delta neo angle wall kit surface mount 38 inch

Asked by: Steve
Thank you for your question, Steve! The 38" Frameless Neo Angle Shower Enclosure will work with either the 38" Neo Angle shower wall set, model B67916-3838-WH, which is a direct to stud installation or for a "surface mount" or glue up wall set, we also offer model B69912-3838-WH. I will include links to both below. https://www.deltafaucet.com/bathroom/product/B67916-3838-WH https://www.deltafaucet.com/bathroom/product/B69912-3838-WH Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

Where can I buy a new shower door handle to open and close glass shower door

Our shower door handle was not tightened correctly and Allen screws are stripped. Need new handle or new Allen screws.
Asked by: John
Hello John, Thank you for your question on the Delta 38" Frameless Neo Angle Shower Enclosure. I am sorry to hear that the screws are stripped on your shower door handle and I will be happy to help where I can. Please refer to the email I sent to you requesting further information regarding your shower enclosure and I will do my best to rectify this issue for you. Please feel free to give us a call if we can help with anything further at 800-355-2721. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Sarah
Date published: 2024-03-28
  • y_2024, m_9, d_14, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_109
  • loc_en_US, sid_422061-PC, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 30ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California

BUNDLES FEATURING THIS PRODUCT

Solo en Home Depot
Solo en Home Depot
Image-BVS42238-PC Secondary Image-BVS42238-PC
Solo en Home Depot

DELTA

DELTA Shower Base with Wall and Enclosure Bundle

Precio de lista: $1,641.68

BVS42238-PC

Solo en Home Depot
Solo en Home Depot
Image-BVS2-CL261-WHPC Secondary Image-BVS2-CL261-WHPC
Solo en Home Depot

Classic

Classic 38x38 Corner Shower Bundle - Neo

Precio de lista: $1,274.40

BVS2-CL261-WHPC

* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.