Surface Mount Body Spray in Lumicoat® Chrome

we are experiencing the same problem with theses units, where one of two body spray heads has lost most pressure. how can this be resolved?

Hi Lynn, Thank you for your question! The spray pivots 30° in all directions. Best regards, Jon

Thank you for your question, vinnieb! No, model 50150-CZ can not be installed on the ceiling. It can only be installed on a wall. Best Regards, Benjamin

Hi, MiamiLLC! Thank you for your question. The Delta 50150-SS Body Sprayer will require the rough valve body and valve trim kit. Here is a link to our available valve bodies and trim kits for custom shower set up: https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets Please feel free to call, email, or message us on social. Best regards, Rosanna Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

Thank you for your question, WBH11! The 50150-BL Surface Mount Body Spray should produce approximately 1.75 gpm @ 80 psi. There is no way to adjust this output as the spray relies on the PSI coming into the home. We suggest contacting a professional to determine if the pressure coming in is appropriate. Best regards, Edward

Hi Stacie, Thank you for your question. We have several collections that this body spray would coordinate with. The Ara, Arzo, Ashlyn, Dryden, Tesla, and Vero collections all have a an angular design style. Lavatory selection: http://www.deltafaucet.com/bath/lavatory/filter-results.html?finish=ss&sort=pricehighlow&collection=arzo&collection=ara&collection=vero&collection=tesla&collection=dryden&collection=ashlyn&function=bath-lavatory Roman Tub selection: http://www.deltafaucet.com/bath/romantub/filter-results.html?finish=ss&sort=pricehighlow&collection=ashlyn&collection=ara&collection=arzo&collection=tesla&collection=vero&collection=dryden&function=bath-romantub Best regards, Jon

Thank you for your question. Delta Faucet model # 50150-SS is different from the older model in the spray pattern and also the gpm. The new model has a gpm of 2.0 and the old one is 1.8 gpm.

Hello Ashley, Thank you for your question. Here are the "Cleaning and Care" instructions from the Delta maintenance and installation guides: "Care should be given to the cleaning of this product. Although the finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. Warning: Dow Bathroom Cleaner with Scrubbing Bubbles and Lysol Foaming Basin Tub and Tile Cleaner must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles. If over-spray gets onto the handles, immediately wipe them dry with a soft cotton cloth." To elaborate on these instructions, we do not recommend using any commercially available cleaning products or cleansers on our faucets. Many of these products contain bleach, ammonia, or acids that could harm the finish. If necessary, a small amount of mild dish detergent may be used to remove stubborn stains or hard water deposits. If water spots are a problem, you can use a 50/50 mixture of tap water and white vinegar to remove them. Vinegar is strong enough to dissolve mineral deposits, but not harsh enough to damage any of our finishes. Be aware that vinegar can stain porous material like marble and granite, which are now being used as countertops.