In2ition HSSH 1.75 GPM 4-Setting in Matte Black

Hello Charlie! Thank you for your question and we are happy to help! We recommend soaking the showerhead of the Delta In2ition HSSH 1.75 GPM 4-Setting MODEL#: 58499 in a 50% warm water 50% white vinegar solution to break up any debris. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hi dennis 7380, Thank you for your question regarding our Delta Faucet 58499-CZ. Our Universal hand shower can be installed with any Delta Faucet roman tub here is the link below. https://www.deltafaucet.com/bathroom/bathingprefn1=clearance&prefv1=false&prefn2=narrowResults&prefv2=hideDiscontinued&prefn3=recertified&prefv3=false&cgid2=Delta_Bathroom_Bathing_Tub-Fillers Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Liz36, Thank you for your question about the Delta Faucet model 58499-SS. Yes, the 2-in-1 shower head has an adjustable ball joint as well as the spray settings and diverter. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Ginnybug, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Chrome MODEL#: 58499 can be soaked in a 50/50 solution of white vinegar and water, Please soak the shower head in this solution for 15-20 min. This soaking should allow for the build-up or debris to be loosened up or removed. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello Kayberry! Thank you for your question and we are happy to help! The Delta In2ition HSSH 1.75 GPM 4-Setting MODEL#: 58499-RB hose is the U495D-RB60-PK and can be purchased directly through us. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hi don1957, Thank you for contacting Delta Faucet Company! We will need more information to better assist you. Please watch out for an email from customerservice@deltafaucet.com. Best Regards, Nicole Digital Communications Specialist

Hello Lisa! Thank you for your question and we are happy to help! The differences between the Delta In2ition HSSH 1.75 GPM 4-Setting Model 58499 and the Delta H2Okinetic® In2ition® 5-Setting Two-In-One Shower Model 58480 are that the 58499 is not H2O Kinetic, and has four settings as opposed to the five settings of the 58480. They both have a GPM of 1.75 at 80 PSI. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer. Best Regards, Carrie

Hello Customer! Thank you for your question and we are happy to help. Please contact us directly by giving us a call or sending us a message on social media or email for further assistance. Best Regards, Carrie

Hi dek2021, Thank you for contacting Peerless Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Chrome MODEL#: 58499 should rotate on the ball joint 30 degrees if the head is too tight to rotate, the threaded connection at the back may be too tight. Thank you for being a loyal Peerless Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Greg, Thank you for your question! Unfortunately there are not removeable restrictors to increase the flow rate. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Bigdog, Thank you for your question about the Delta Faucet model 58499-SN In2ition® 1.75 GPM 4-Setting Hand Shower. I apologize for any difficulty finding this information. We are happy to help! This showerhead installs to a standard shower arm connection and it can be used with any shower valve, including an R10000-PX. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hello tjmtrubl, Thank you for your inquiry. We are sorry to hear that you have had difficulties finding the hand held part of the Delta 58499-RB and we would be more than happy to help you. Unfortunately, the entire unit would need to be purchased as the handheld shower is not a part that can be purchased separately from the shower head. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hi Shaun, Thanks so much for contacting Delta Faucet Company! The 58499 has a built-in flow restrictor that can not be removed, it will also include a debris screen at the back where it threads onto the shower arm. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Debbie3519, Thanks so much for contacting Delta Faucet Company about, 58499-SN! I have an included a link below to the Delta Faucet website showing our current rough valves in a brushed nickel finish. The 58499-SN is not model specific and can be installed with any of our shower kits. https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets?cgid2=Delta_Bathroom_Showering_Tub-and-Shower-Faucets_Shower-Valve&prefn1=clearance&prefv1=false&prefn2=finish&prefv2=Stainless&prefn3=narrowResults&prefv3=hideDiscontinued&prefn4=recertified&prefv4=false Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello LaPo Parts Guy. Thank you for contacting Delta Faucet Company and we are happy to help. We are sorry that this information is not readily available to you. Unfortunately, the handheld of the Delta 58499-SS is not orderable separately. With any further questions or concerns, please do not hesitate to contact us again. Best Regards, Carrie

Hi Mike, thank you for contacting Delta Faucet Company! The difference between 58499 and 58498 is the design of the shower head. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Hi Bruce Pearson! Thank you for contacting us at Delta Faucet! I will be happy to help. The pause feature will engage when using the mode selector in the middle of the hand shower. Please contact us directly if further assistance is needed at this time.  Best Regards, Tim

Hello Gary, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available for our Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Venetian Bronze MODEL#: 58499-RB, and I am happy to help you! Our Delta product is a mixture of metallic and non-metallic material, Quality is very important to us and our products undergo rigorous testing to ensure high-quality performance. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole

Hello Jim G, Thank you for your question! We are happy to help! The Delta In2ition model 58499 has a flow rate of 1.75 GMP at 80 PSI. Unfortunately, there is no flow resistor that can be removed and keep the warranty valid. We do have many In2ition models that have a flow rate of 2.5 GPM at 80 PSI. With the link below you can filter for a shower head to meet your needs with features that include, but are not limited to ADA compliance, Water Sense Label, In2ition design, max flow rate, and finish. https://www.deltafaucet.com/bathroom/showering/two-in-one-shower-heads Please contact us if you have any questions or need further assistance. Best Regards, Emma

Hello Reff, Thank you for contacting us. I apologize for the low hot flow you are experiencing with your Delta Faucet and I am happy to help you. The most common cause of a low flow rate is debris. The best way to clear any debris is to flush the supply lines. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute. Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should. If it does not, you can try soaking the cartridge in white vinegar for about 15-30 minutes. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Sharon! Thank you for your question and we are happy to help. To flush the shower, please follow the instructions below: Depending on where your supply shut-offs are, you may want another person to help. Caution: the water may be very hot. Turn off the hot and cold supply to the valve. This may involve shutting off the water to the entire residence. Or there may be supply stops on the valve itself, or just for the fixture or room. Turn the volume control on to relieve any pressure behind the valve. Remove the handle, There may also be a trim sleeve to slide off of the valve. If you have supply stops on the valve itself, you will remove the escutcheon plate to access those. Remove the bonnet (A strap wrench works best to not deform the bonnet). Be careful not to twist the valve. Remove the cartridge by wiggling as you pull, taking care to protect the stem. If the cartridge has a metal stem, reattach the handle to provide a better grip. Check inside the valve for any other components and remove those. Once all the parts have been removed from the valve, close the shower curtain or door. Caution: the water may be very hot. Turn the water supply valves on and let the water run for 60-90 seconds. Perform any maintenance on the removed components. Reassemble the shower valve. Check for leaks. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Hello duskdeb, Thank you for your question! I am happy to help you! Our Delta Faucet in2ition 58499 hand shower snaps into place, The unit does not have a magnetic it simply snaps into the center of the showerhead. Please contact us back for any further questions. Best Regards, Nicole

Hi Sue48, Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Venetian Bronze MODEL#: 58499-RB has a mode selector on the upper right-hand side of the shower head, this will allow you to use both shower head and hand shower simultaneously as well as individually. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Willy50! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. For the Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Chrome MODEL#: 58499 that is not getting full hot water, we recommend making sure that the rotational limit stop is where you would like it to be on the valve. We also recommend flushing the valves of new installations. To flush the valves, please follow the instructions below: Turn off the hot and cold supply to the valve. This may involve shutting off the water to the entire residence, or for the room or fixture. [Or there may be supply stops on the valve itself behind the escutcheon requiring removal of the handle.] Turn the volume control on to relieve any pressure behind the valve. Remove the handle, There may also be a trim sleeve to slide off of the valve. If you have supply stops on the valve itself, you will remove the escutcheon plate to access those. Remove the bonnet. A strap wrench works best to not deform the bonnet. Caution: Be careful not to twist the valve. Remove the cartridge by wiggling as you pull, taking care to protect the stem. If the cartridge has a metal stem, reattach the handle to provide a better grip. Check inside the valve for any other components and remove those. Once all the parts have been removed from the valve, close the shower curtain or door. Caution: the water may be very hot. Turn both of the water supply valves on full and let the water run for 60-90 seconds. Perform any maintenance on the removed components. Reassemble the shower valve. Check for leaks. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi Steven, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! If a new shower valve was also installed, I recommend checking that the rotational limit stop was adjusted during installation. It sets the maximum temperature. See the valve trim's installation manual or videos here: https://support.deltafaucet.com/s/article/How-to-Adjust-Your-Rotational-Limit-Stop-T13-14-Series https://support.deltafaucet.com/s/article/How-to-Adjust-Your-Rotational-Limit-Stop-T17-Series-Video https://support.deltafaucet.com/s/article/How-to-Adjust-Your-Rotational-Limit-Stop-T17T-Series-Video Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Pat, Thank you for your question about the Delta Faucet model 58499 In2ition 4-Setting Showerhead In Chrome. I apologize for any difficulty with the spray direction. I know that can be frustrating. We are happy to help! This showerhead features a ball joint connection so the showerhead can swivel 30 degrees. Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan

Hi Colleen, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing with locating this information. We will be happy to assist you. The Delta Faucet In2ition HSSH 1.75 GPM 4-Setting In Chrome MODEL#: 58499 can be installed with a standard Delta Faucet Monitor 17 Series Valve Trim. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley