H2Okinetic® In2ition® 5-Setting Two-In-One Shower in Lumicoat® Black Stainless

Hello Dozer, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta Faucet UNIVERSAL SHOWERING In2ition H2Okinetic 5-Setting Two-In-One Shower MODEL 58620-PK Max flow rate 1.75 GPM @ 80 psi. The Delta Faucet UNIVERSAL SHOWERING In2ition H2Okinetic 5-Setting Two-In-One Shower MODEL 58620-25-PK has a max flow rate of 2.5 GPM @ 80 psi. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hello RJJE, Thank you for contacting us, I would be happy to help you. If you plan to use brushed nickel then your going to want to order SS, please see the link below. https://www.deltafaucet.com/bathroom/product/58620-SS-PK Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi notsure, Thanks so much for contacting Delta Faucet Company! This handshower will only reduce the flow rate to a trickle when engaging the pause mode. It will not completely turn the flow of water off. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Vikk, Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. This Delta Faucet model 58620-RB-PK provides a flow rate of 1.75gpm. This is a WaterSense labeled product and uses at least 20% less water than the industry standard—saving you money without compromising performance. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim Digital Communications Specialist

Hi Lynn! Thank you for contacting us at Delta Faucet! I will be happy to help. This In2ition hand shower is not exclusive to any particular collection. It will be up to your personal preference as to what trim kit you match with it. Best Regards,  ​​​​​​​ Tim

Hi Peggy, Thanks so much for contacting Delta Faucet Company! The In2ition® H2Okinetic® 5-Setting Two-In-One Shower MODEL#: 58620-PK hose can be disconnected by unthreading it from the hand shower. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Justme, Thanks so much for contacting Delta Faucet Company! The UNIVERSAL SHOWERING In2ition® H2Okinetic® 5-Setting Two-In-One Shower MODEL#: 58620-RB-PK settings include H2Okinetic PowerDrench spray, Full Body spray, Massaging spray, Soft waterfall spray, and Pause! Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Carl C! Thank you for contacting us at Delta Faucet! I will be happy to help! This Delta Faucet In2ition® H2Okinetic® 5-Setting Two-In-One Shower model 58620-BL-PK is plastic. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. We also have a Lifetime Limited Warranty on all parts and finish. Unfortunately, we do not have a complete breakdown of the materials used. In general, metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Please contact us directly if further assistance is needed at this time. Best Regards, Tim

Hi Dona, Thanks so much for contacting Delta Faucet Company! Thanks for inquiring about the H2Okinetic® In2ition® 5-Setting Two-In-One Shower MODEL#: 58620-PR-PK. It sounds as though the rotational limit stop may not have been adjusted. The rotational limit stop is used to limit the amount of hot water available such that, if set properly, the user will not be scalded if the handle accidentally is rotated all the way to “hot” when a person is showering or filling a tub. The first position allows the LEAST amount of hot water to mix with the cold water in the system. In the first position, the water will be the coldest possible when the handle is turned all the way to hot. As you move the rotational limit stop counterclockwise, you progressively add more and more hot water in the mix. The last position to the left will result in the greatest amount of hot water to the mix, and the greatest risk of scald injury if someone accidentally turns the valve handle all the way to the hot side while showering or filling a tub. To adjust the temperature of the water coming out of the valve, pull the disc back to a position where it is possible to remove the rotational limit stop and readjust the teeth engagement position to the desired temperature. Clockwise will decrease the outlet temperature, counterclockwise will increase the outlet temperature. Temperature change per tooth (notch) could be 4° - 16°F based on inlet water conditions. Repeat as necessary. Push disc until fully seated. If you would like installation help, you may contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We also have how-to videos on our website and on our YouTube channel. https://www.deltafaucet.com/service-parts/how-to-videos Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Aj243, Thank you for contacting us. I am sorry this information is not readily available and I would be happy to help you. Correct the R10000-UNWSHF is our high flow valve, which is used for shower only installation. Any of our trim kits T13/14, T17, and 17T would accept this valve. I have also added the link to a comparison of the thermos and the pressure valves. https://www.deltafaucet.com/design-innovation/innovations/shower/tempassure-valve--monitor-valve Please contact us back if you have any questions or need further assistance.  Best Regards,  Nicole

Hi Customer! Thank you for your question and we are happy to help. We are sorry to hear about your experience, please contact us directly by giving us a phone call or sending us an email for further assistance with warranty replacement parts. Best Regards, Carrie

Hello Paula, Thank you for your question! I am happy to help you! Our Delta 58620-RB-Pk has a max flow rate 1.75 GPM @ 80 psi, 6.6 L/min @ 550 kPa. Please contact us back for any further questions. Best Regards, Nicole

Hi Nancy, Thank you so much for contacting Delta Faucet Company! The Delta 58620-PK can be used with the Delta UA902-PK to adjust up down for shorter and taller members of the household. Please use the below link to see the Where to Buy page on the Delta site. https://www.deltafaucet.com/where-to-buy Please reach out with further questions! Best Regards, Skyler

Hello Jen, Thank you for your question. I am happy to assist you. All spray settings include: H2Okinetic PowerDrench spray, Full Body spray, Massaging spray, Soft waterfall spray, and Pause. Please contact us back via email with any further questions. Best Regards, Skyler Phone: (800) 345-3358 | Email: customerservice@deltafaucet.com

Hello Rebe, Thank you for your question! We are happy to help! Yes, to install the Delta In2ition H2Okinetic 5-Setting Two-In-One Shower model 58620-SS-PK you will unscrew your current shower head and then thread on the new shower head. Please contact us if you have any questions or need further assistance. Best Regards, Emma

Hi Ted14, Thanks so much for contacting Delta Faucet Company! It is possible that flushing the H2Okinetic® In2ition® 5-Setting Two-In-One Shower MODEL#: 58620-PR-PK could resolve this issue. To do this, turn off the water supplies, remove the cartridge, and turn the supplies back on for one minute. Please make sure that you are getting good flow through both the hot and cold sides while flushing. You can also shake the cartridge back and forth to make sure the back half of the cartridge rattles. This means that the pressure-balancing spool is moving freely, as it should. If you would like installation help, you may contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We also have how-to videos on our website and on our YouTube channel. https://www.deltafaucet.com/service-parts/how-to-videos Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi timwig, Thank you for your question! Unfortunately there is no way to increase the turning radius of the showerhead. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! Our shower heads and hand showers will work with our R10000-UNBX MultiChoice Universal rough-in valves. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello dnm0010, Thank you for your question! I am happy to assist you! The Delta 58620-BL-PK shower head is compatible with all Delta shower arms and flanges, as all arms are 1/2" diameter and the flange diameters are identical. Please contact us back with any further questions. Best Regards, Skyler

Hello Nick 432, Thank you for your question. We are happy to help! The 2-in-1 showerhead models 58620-PK and 75510 are similar showerheads with similar features. They both have 5 spray settings and the same flow rate. One difference would be styling. The back of the 58620-PK has a chrome finish, while the back of the 75510 is gray. Delta Faucet products can often be found for less than our list prices from dealers and retailers that carry our products. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Good morning JJFlynn! Thank you for your question! I am happy to help you. The hose that comes with this shower head is 60 inches, and is stretchable to 82 inches. Please contact us back for any further questions. Best Regards, Frank

Hello ChrisL, Thank you for your question! We apologize for the inconveniences you are experiencing and will be happy to help you. The Delta Faucet UNIVERSAL SHOWERING In2ition H2Okinetic 5-Setting Two-In-One Shower MODEL# 58620-SS-PK is plastic. Non-metallic products are beneficial in that they do not rust or corrode and help prevent heat transfer. We also have a Lifetime Limited Warranty on all parts and finish. Unfortunately, we do not have a complete breakdown of the materials used. In general, metal parts are usually brass (hub, handle, body, tube, fittings), zinc (escutcheon, hub, handle), or stainless steel (set screw, undercover plate). Please contact us directly if further assistance is needed at this time. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley