ProCrylic, 60 pulgadas x 32 pulgadas Bañera de mano izquierda en blanco brillante
N.º de modelo: B10513-6032L-WH
Image Thumbnail, click to view zoomed product image 
nulo 
nulo 
nulo 
nulo 
CARACTERÍSTICAS DEL PRODUCTO
Desarrollado con estilo, diseño y durabilidad, el material ProCrylic® de Delta le ayuda a crear una apariencia de acrílico de alto brillo duradera en su baño. Cada baño y ducha se diseñaron con una apariencia elegante y sofisticada que combina perfectamente con cualquier decoración. Los productos para baño de Delta fabricados con el material ProCrylic® son resistentes al moho y fáciles de limpiar. Además, son tan fáciles de mantener como de instalar para ofrecerle un baño asequible que es simplemente hermoso.
- Belleza duradera para su baño.
- Estilo, diseño y durabilidad.
- Material duradero, blanco brillante de alto brillo
- Fácil de manejar e instalar, sin soporte de fibra de vidrio
- Base reforzada integrada para simplificar la instalación
- Ayuda a ahorrar dinero, sin necesidad de una base de argamasa en la instalación estándar*
- *Es posible que se requiera cuando las superficies de instalación sean extremadamente irregulares.
- Instalación directa con pernos para mayor estabilidad.
- Instalación en 1 pieza.
- Desagüe a la izquierda.
- El diseño contorneado incluye brida de clavado
- Diseño contorneado
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Overall Height (in.) :
19 1/4
Tipo de válvula:
NA
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
RESEÑAS
Rated 1 out of
5
by
Dean from
Worst tub I have ever installed
If I could give it 0 stars I would. Firstly I am a plumber so I have installed countless tubs and surrounds from many different manufacturers. This tub I purchased for my own home during our bathroom remodel. I associated Delta with quality. The tub mounted just fine although front skirt is very flimsy. The surround/ wall kit is next to impossible to install level/plumb without massive gaps in the panels I mean 1/2”+ gaps. I took it apart at least a half dozen times and made modifications to get some sort of nice finished product. I found the walls are different heights and thickness. Finished product looks awful i caulked in the massive gaps and figured I could live with it. The finish started coming off within a few months, it has now been a few years the tub looks like it is 20 years old. If that wasn’t enough there is now starting to get hairline cracks and leaked through our kitchen ceiling. I am now shopping for a replacement tub after only a few years of use… I am very upset that I now have to take on this project AGAIN.
Date published: 2024-02-07
Rated 1 out of
5
by
John from
Very disappointed
I bought this tub and matching wall unit sight unseen because I figured, if it’s Delta, it has to be good. I’m not a professional, but I’m far from an amateur when it comes to installing tubs, showers and wall units. I frame the alcove for the tub and wall unit, made sure everything was plumb and level and figured this install would be a snap. The tub itself sat nicely in its’ new home, but I couldn’t believe how flimsy the outer skirt was and the fact that Delta supplied a cheap piece of plastic piece to attach to the tub to hold it in place was shocking. I ended up attaching a piece of treated 2x4 to the floor behind the tub skirt and throwing the plastic piece away, which was a huge improvement. When it came time to fit the wall unit in place, I installed the back panel, then went to install the end wall. When the end wall was in place, level and lined up with the side of the tub, it was tight to the top of the back wall, but at the bottom, there was a 3/8” gap. I took everything back apart and checked the stud walls again for level…still perfect, so I proceeded to check the wall unit panels. There’s a 3/8” difference in the thickness of the wall panel from top to bottom. I corrected that issue by cutting a long tapered shim out of a 2x4 and attaching it to the stud where corner of the back wall sits. After all this jacking around, everything looks correct and the face of the wall unit is now level. If I wasn’t so far along with this project, I would have boxed the entire thing back up and returned and bought a sterling tub and surround.
Date published: 2023-02-23
Preguntas y respuestas
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.