Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado

Hi Philip Dufrene, Thank you for your question! The RP48718SS tub spout will work with the 142910-SS shower trim. The unit should of included the standard R10000-UN shower valve which has a connection for a tub spout. Best regards, Brandis

Thank you for your question. Delta Faucet model # RP48718SS is metallic.

Hi Shawn, Thank you for your question. Your old spout RP17454 screws onto an adapter RP12307 that is most likely sweated onto the copper pipe coming out of your wall. The RP48718SS is a slide on spout made to attach directly to the copper pipe. The new spout will not work with the old adapter. You will have to remove the adapter to be able to install the new spout. We have several tub spouts that will work with the RP12307 adapter you have in the Brilliance Stainless (SS) finish. They include the RP43131SS, RP42915SS, RP40625SS, and the RP17453SS to give you a few options. Thanks, Dave

Thank you for your question. Delta Faucet model # RP48718SS is a slip-on spout. It will slip onto a 1/2" copper pipe. If the tub spout does say sweat-on, it does mean using solder to attach it to the pipe.

Thank you for your question. Delta Faucet model # RP48718 is 2.6 inches at the widest part. We do not manufacture a trim ring to go behind it. However, we do manufacture a larger tub spout that is 3.5 inches at the widest part. It is model # RP52148. It will need to be either sweat onto a 1/2" copper pipe or thread onto a 1/2" iron pipe. This may cover the hole in the wall.

Hello, DolandDark! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you but I will be happy to help! Unfortunately, there is no adjustment to make on this Delta Faucet RP48718 tub spout. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim

Hi Zimmer, Thank you for your question about the Delta Faucet RP48718. This spout is installed by slip-on a 1/2" copper pipe. Tub Spout RP64721 is a slip-on tub spout with a removable adapter that would also allow a 1/2" IPS thread into the nose connection when removed. https://www.deltafaucet.com/bathroom/product/RP64721.html Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Charles, Thank you for your question. I am sorry that you are experiencing an issue with your tub and shower faucet. We are happy to help. The issue you describe is often called shower rise or stacking. It is possibly caused by a blockage in the tub spout or there can be one of several reasons. In a Delta Faucet tub and shower, shower rise can be caused by: 1) The valve could be upside down. 2) The length from the valve to the tub spout is outside of the 8" to 18" recommended. 3) There is more than one 90-degree angle elbow. 4) Something other than ½" smooth copper or galvanized pipe was used going to the spout. No push fittings. No "shark-bite" fittings. No cast or drop ear elbows. 5) Something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best regards, Bryan

Hi JayP! Thank you for your question! I will be happy to help. Unfortunately no, it will need to be either sweat onto a 1/2" copper pipe or thread onto a 1/2" iron pipe. Best Regards, Tim

Hi Scott! Thank you for your question and we are happy to help. Unfortunately, the Delta RP48718SS does not have a repair kit. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Drew707, Thanks so much for contacting Delta Faucet Company about RP48718SS! The finish is described as a neutral, low-gloss finish. Brilliance® finishes, designed to not corrode, tarnish or discolor for a “like-new” look for life, are developed by embedding molecules deep into the faucet’s surface, creating a bond that is virtually indestructible with an incredibly reflective shine. This process is known as Physical Vapor Deposition (PVD). Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello SaulE, We are happy to help with your tub spout question. Unfortunately, there is not a repair kit for the RP48718SS diverter tub spout. If there is an issue with the diverter, the tub spout would need to be replaced. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi Rich, Thank you for your question about the Delta Faucet RP48718SS. The copper tube should go past the o-ring. The tube should be chamfered and free of burrs to avoid damaging the o-ring. The pipe length from the finish wall should be between 1 3/8" and 2 1/2". Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Todd, Thank you for your question! Unfortunately this tub spout is only available in chrome and stainless steel finishes. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist