Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado
N.º de modelo: RP52148
Image Thumbnail, click to view zoomed product image 
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
- Levantar para desviar
- Longitud total de 7 1/2 "
- Soldar en tubo de agua de cobre (CWT, por sus siglas en inglés) de 1/2 " o enroscar en boquilla del tamaño de las cañerías de hierro (IPS, por sus siglas en inglés) de 1/2 "
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Características especiales
SpotShield®
SpotShield®
La tecnología SpotShield™ resiste las manchas de agua y de dedos, y ayuda a reducir las manchas y el olor que causan el crecimiento de microbios en el acabado de la llave, con el fin de que esta se mantenga limpia durante más tiempo.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Recursos
Información de instalación
Altura total:
3 1/2
Voltaje:
0
Tipo de válvula:
NA
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-R10000-UN]()
Delta®
Delta® Conjunto interior de válvula universal MultiChoice® para ducha/bañera - Entradas/salidas universales
Precio de lista: $70.95
R10000-UN
4.55 278
RESEÑAS
Rated 1 out of
5
by
Bobb from
Plastic - Beware!
Terribly disappointed. Spec sheet for the set indicates made of brass, but the tub spout is 100% plastic. At this price point, that's all wrong. Stay away!
Date published: 2023-06-13
Rated 1 out of
5
by
Chuck17 from
Produce Quality Tub Spouts
It's a shame with the quality that Delta produces they manufacture tub spouts that are plastic. I understand the warranty, but the quality and feel is lacking. I have Dryden throughout our home and for a quality line I am left with plastic. Very disappointed. Time to step up your game.
Date published: 2019-11-12
Rated 1 out of
5
by
stephanie from
Plastic
I've bought many Delta Dryden faucets and accessories for our hotel and have been very happy. However, the tub spout is plastic! I am so disappointed. I wish they had a higher quality product to match this line.
Date published: 2019-02-26
Rated 3 out of
5
by
Tee1 from
Not as pictured!
I have purchased 3 faucets, a Roman tub trim kit, a shower head and handle all in Venetian Bronze in the Dryden series. Love them but this spout does not match exactly. There is more bronze edging on this piece. It is very distinct, not subtle.
Date published: 2018-08-10
Rated 3 out of
5
by
jhancyinteriors from
Dryden Tub Filler
The style of the fixture is beautiful but the Champagne Bronze finish is easily marked. We are still working with Delta to resolve this issue and hopefully there is a simple solution.
Date published: 2018-07-26
Rated 3 out of
5
by
Teevo from
Looks nice but feels like plastic
I purchased this along with a whole bathroom worth of higher-end delta products. Most of the other pieces have a weighty metal feel to them, but this feels like plastic. It looks nice and functions well. The brilliance stainless finish does have a tendency to spot.
Date published: 2018-02-02
Rated 3 out of
5
by
CarolineOntario from
disappointed
Looks great until you touch it. Just really cheap plastic. I was expecting all of my Delta product to be a nice sturdy chrome like all of the other delta product I bought. But not the diverter spout for my tub. Very disappointed in that one.
Date published: 2016-05-26
Rated 4 out of
5
by
FloridaRemodelGal from
Great look, but it shows water spots
I love the look of stainless steel or brushed nickel as the 'new' finish to give my remodeled 20-year-old bathrooms a modern look. I have problems with this particular item, however.
I wipe off the water spots after every use (I know - I am very picky) so they always look new and clean. I have a very hard time getting the spots off this particular finish, but not other items with similar finish.
Date published: 2013-05-21
Preguntas y respuestas
Does the chrome finish come with spotshield?
Thank you for your inquiry, AA11! The Delta Dryden Tub Spout RP52148SP is the only SpotShield Stainless finish we make. We do not manufacture a SpotShield Chrome finish.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52148
Best regards,
Tanya
Date published: 2024-03-28
When I turn the tub diverter on for the tub spout the pressure builds up and starts leaking at a pretty good rate out of the shower above after about 20 seconds. The flow rate from the spout is less than my water pressure. What will fix it?
Hi there Craig,
Thank you for your inquiry! Based on your description of the flow from the tub/shower, you are experiencing an issue known as shower rise. This is an installation issue, which has several possible causes. Please make sure that:
1.The valve body is right side up.
2.The pipe for the tub spout drop is only 1/2" copper or iron pipe.
3.The tub spout is 8” - 18" from the valve body.
4.No drop-ear elbows or push-to-connect fittings are used. Only one 90 standard degree copper or iron elbow should be used.
5.There is no blockage in the pipe (such as excess solder) or tub spout.
Best regards,
Tanya
Date published: 2024-03-28
Can you tell me if there is a tub spout without the copper highlights on the edges that of the ven bronze that will fit the t17451-rbh20 universal valve preferably not plastic
Hi, Laurel!
Thank you for your question. At this time, all of our Venetian Bronze Tub Spout Assemblies have copper highlights and are non-metallic. We do apologize for any inconvenience this may cause.
Best Regards, Rosanna
Date published: 2024-03-28
What options to replace a 600 series stub spout?
I'd like to replace my current tub spout that is a 600 series. It has a "ring" you pull down to switch to shower mode. The inside guts where it would thread onto the pipe looks to be about an inch in diameter. Which models would be available to replace this without having to sweat something on or go behind the wall? Would prefer brushed nickle or bronze.
Hi Dee, Thank you for your question. The RP17453SS is the same pull down tub spout you currently have in our Brilliance stainless finish which is comparable to other brands brushed nickel. We have several diverter tub spouts that will screw onto the RP12307 tub spout adapter your current spout uses. The RP72565, RP43161,RP42915, RP34357, RP51503, RP52148, RP53419, and RP61269 are all diverter tub spouts that are available in both the (SS) brilliance stainless or (RB) venetian bronze finishes that will work.
Thanks,
Dave
Date published: 2024-03-28
Can inside parts be replaced on this item?
For a tiling repair, I removed this spout/diverter. There is a plastic fitting inside that has threads that go onto the nipple from the pipe in the wall and I think I stripped the threads and now the spout leaks. I realize this is not a warranty item but I would really appreciate not having to replace the whole spout/diverter if a replacement part is available. The part in question is the threaded, conical tube in the foreground of the photo.
Hi Hank, Thank you for your question. Unfortunately the plastic adapter is not available as a separate piece. The entire tub spout RP52148SS will have to be replaced.
Thanks,
Dave
Date published: 2024-03-28
I need a replacement escutcheon for a Dryden tub spout # T17451SSH2O
Hello roaddog1957,
Thank you for contacting us, I would be happy to help you.
The plate for the tub spout on model T17451-SSH2O is not a separate part, The whole tub spout would need to be replaced.
Please contact us back if you have any questions or need further assistance.
Best Regards,
Nicole
Date published: 2024-03-28
How is the water flow on this? I just purchased one and not happy with the flow. I know it square underneath but seems weird the way it flows
Thank you for your question, Erica! The RP52148 tub spout has a maximum flow rate of 7.0 gpm @ 60 psi.
Best Regards, Benjamin
Date published: 2024-03-28
I have a Dryden Spotshield finish Tub Spout that got dented and needs replaced. Will the Stainless Spout have the same look, appearance, or color as the Spotshield Stainless Spout?
Hi Tinman,
Thank you for your question about the Delta Faucet RP52148SS.
This tub spout has a SpotShield stainless finish. A stainless finish will match a SpotShield stainless.
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-02-14
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.