Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado

Hi Meli, Thanks so much for contacting Delta Faucet Company! If you are threading on the tub spout adapter you will need between 5/8" and 1 5/8". If you are sweating it on you will need 2" to 4" from the wall. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Frog! Thank you for your question and we are happy to help. The Delta RP61357 tub spout threads directly onto a 1/2" pipe near the nose, any tub spout that is 1/2". An adapter can not be sweated on. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Ron T, Thank you for your question about the Delta Faucet model RP61357. This tub spout threads directly onto a 1/2" pipe near the nose. The tub spout model U1075-PK can fit a 3/4" threaded connection. https://www.deltafaucet.com/bathroom/product/U1075-PK.html Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Shan, Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing locating this information. We will be happy to assist you. The Delta Faucet Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP61357 technical specifications can be found at the link below. https://media.deltafaucet.com/SpecSheet/DSP-B-142996%20Rev%20D.pdf Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance. Best Regards, Kelley

Hi Saltymermaid, Thanks so much for contacting Delta Faucet Company! If you are threading on the RP61357 tub spout adapter, you will need between 5/8" and 1 5/8". If you are sweating it on, you will need 2" to 4" from the wall. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi brian, Thank you for your question about the Delta Faucet RP61357. This tub spout installs to 1/2" threads. Our tub spout U1011-PK fits 3/4" threads with the included 3/4" adapter installed flush to the wall. Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi HTC408, thank you for your interest in the RP61357! This spout will thread onto a 1/2" copper pipe into the nose of the spout. Please see the tub spout installation instructions below, for the diagram (A). https://www.deltafaucet.com/files/live/sites/delta/files/customer- Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Bob27, Thanks so much for contacting Delta Faucet Company! The RP61357 is made of metal construction. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Julie N, Thank you for contacting Delta Faucet Company! Our RP61357BN threads directly onto a 1/2" inch copper or iron galvanized pipe, near the nose of the spout. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello Susan! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The best replacement for the Delta Tub Spout - Pull-Up Diverter In Chrome MODEL#: RP5834 would be the CLASSIC Classic Tub Spout - Pull Up Diverter In Stainless MODEL#: RP101727SS as we do not have a diverter in Brushed Nickel. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi Tommylovesangel808, Thanks so much for contacting Delta Faucet Company! The Tub Spout MODEL#: RP61357OB sweats onto 1/2 in. CWT or threads onto 1/2 in. IPS. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi johnbj! Thank you for your question! Unfortunately the RP61357 is the only tub spout we manufacture in the brushed nickel finish at this time. Best Regards, Tim

Hi Steve, Thank you for your question. The Delta model RP61357OB is of metallic construction. Best Regards, Simone

Hi Lanae, Thank you so much for contacting Delta Faucet Company! The Delta RP61357BN threads directly onto a 1/2" pipe near the nose and does not use any adapter for the install. Please reach out with further questions! Best Regards, Skyler Digital Communications Specialist

Hi Jen7, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Tub Spout - Pull-Up Diverter In Oil Rubbed Bronze MODEL#: RP61357OB has female threads in the nose of the spout and will thread onto a male 1/2" iron pipe. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Kaka G, Thanks so much for contacting Delta Faucet Company! The RP61357OB threads directly onto the 1/2" pipe, there are no extra internal parts needed for installation. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Lizz, Thank you for contacting us, I am happy to help you. The Delta RP77091OB tub spout threads directly onto a 1/2" pipe near the nose. Please contact us back for any further questions. Best Regards, Nicole

Hello BCNEIL62, Thank you for your question. We are happy to help! The Delta Faucet RP61357BN tub spout will thread to a pipe between 3-7/8" and 4" from the finished wall. Please reach out directly if you have any questions or need additional assistance. Best regards, Bryan

Hi JohnUA! Thank you for your question and we are happy to help. The Delta RP61357BN tub spout threads directly onto a 1/2" pipe near the nose. It does not use any adapter for the install. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi janetjj, Thanks so much for contacting Delta Faucet Company! This tub spout is 5 3/8 in length and installs via 1/2" pipe that threads into the nose of the spout. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Good afternoon astedke! Thank you for your question! I am happy to help you! Thank you for your question. We do not offer a tub spout trim ring as a separate item. The RP61357BN spout that you have has a 2-15/32" diameter. RP52148SS has a diameter of 3-1/2", and RP34357SS has a diameter of 3-1/8". These spouts may be large enough to cover the exposed hole. Please contact us back for any further questions. Best Regards, Frank

Hi Jack, Thanks so much for contacting Delta Faucet Company about RP61357OB! Yes, the tub spout uses the RP12307 adapter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Nikki, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. All Delta Faucet tub spouts are required to be installed using a 1/2" supply line. The Delta Faucet part RP61357BN Delta® Tub Spout - Pull-Up Diverter In Brushed Nickel threads directly onto a 1/2" pipe near the nose. An adapter can not be sweated on. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hi I Am Rich, Thank you for contacting Delta Faucet Company! The Delta RP61357BN tub spout threads directly onto a 1/2" pipe near the nose and does not use any adapter for installation. The Delta RP101727SS or RP17453SS will work with the RP100154 adapter, however, these tub spouts are in our Stainless Steel finish. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hello BJBeck! Thank you for contacting us at Delta Faucet! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you. Our faucets are made of several materials and differs on the model. They can contain bronze, brass, zinc, stainless steel, copper, and plastics. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com if further assistance is needed at this time.   We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim