Tubo de salida para bañera - Desviador con tirador hacia arriba en cromado

Thank you for your question, Beth! I have included a link to a maintenance and installation sheet, that covers several tub spouts we manufacture. For installation instructions on model RP73371, please refer to page 5, diagram C1. If you need further assistance, feel free to contact us directly. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best Regards, Benjamin

Hi Trim Less Showerhead! Thank you for your inquiry. The RP73371BL tub spout is only meant to be used with the slip on adapter RP33794 and unfortunately can not be interchanged with the RP123007 adapter. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward

Hello DANI86, Thank you for your question. This should work with any tub and shower setup that requires a diverter tub spout. Best regards, Jon

Hi KR, Thank you for your inquiry! The Delta Trinsic Diverter Tub Spout RP73371BL is 6 3/16" (157 mm) long. https://media.deltafaucet.com/SpecSheet/DSP-B-T17059%20Rev%20G.pdf Best regards, Tanya

Hi, Ashley! Thank you for your question. The Delta RP73371RB tub spout assembly is still being manufactured and can still be ordered. It is not being discontinued at this time. Best Regards, Rosanna

Hi, RJCwake! Thank you for your question. This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best Regards, Rosanna

Dear Brad, Thank you for your inquiry! The RP73371SS is the tub spout that comes with the Trinsic 14 Series Tub and Shower T14459-SS model. The tub spout will include a brass slip-on adapter (RP33794) that you can remove from the tub spout. The 1/2" copper pipe should extend 2" to 4" from the finished wall. Install the adapter so that there is a 1/4" to 1/2" between the adapter and the finished wall. Tighten the set screw, then thread the tub spout onto the adapter. Please page 5 of the below Maintenance/Installation document link, for these directions. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Tanya

Hi, Luke! Thank you for your question. Delta part number RP73371RB tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw. Best regards, Themar

Thank you for your inquiry, Stephanie! The back flange of the Delta Trinsic Tub Spout RP73371BL has a diameter of 3 3/16" (81 mm). Best regards, Tanya

Thank you for your inquiry, David! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Tanya

Hi SC, Thank you for your question. To install the RP73371CZ tub spout the copper pipe needs to extend between 1-3/4" to 3-3/4" from the finished wall. Thanks, Dave

Thank you for your question, Wayne! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen in C-1 of the maintenance and installation manual. The o-ring inside the tub spout will provide a proper seal. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward

Hi Helpme, Thanks so much for contacting Delta Faucet Company about, RP73371! This tub spout is designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw. Verify the proper installation on page 5. https://media.deltafaucet.com/MandI/107700%20Rev%20H.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello jlt1992! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. Delta tub faucets are made of several materials which may include but are not limited to Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie

Hi Lorri, Thanks so much for contacting Delta Faucet Company! This tub spout can be used for a tub-only application but please see the following link for the Trinsic non-diverting tub spout. https://www.deltafaucet.com/bathroom/product/RP77350.html?utm=delta Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Dear Deanna, Thank you for your question! I will be happy to assist. The tub spout RP93273 uses a tri-universal adapter. The RP73371 uses RP33794 which is a slip-on adapter. Please contact us back if you need further assistance. Best regards, Kyra

Hi mveivia, Thanks so much for contacting Delta Faucet Company about, RP73371! The tub spout includes the RP33794 adapter, which allows for a 1/2" slip on connection. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Thank you for your question, Melody! The RP33794 adapter would need to be installed, with the o ring on the front, and the set screw and threads on the back side of the RP73371 tub spout. Best Regards, Benjamin

Hi TBird, Thank you for contacting us at Delta Faucet! This Delta Faucet RP73371BL does not feature a flow restrictor. Please contact us directly if further assistance is needed at this time.   Best Regards, Tim Digital Communications Specialist

Hi ejpilot, Thanks so much for contacting Delta Faucet Company about RP73371BL! We do not currently manufacture a bath waste in Matte Black, and we do not have any recommendations for 3rd party drains. I am sorry for any inconvenience this may have caused. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hi Matt, Thank you for your question about the Delta Faucet RP73371BL Trinsic® Tub Spout - Pull-Up Diverter In Matte Black. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help! This spout should include the RP33794 slip-on adapter. First, install the adapter and tighten the set screw, then screw the spout onto the adapter. Please reach out if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Dave, Thanks so much for contacting Delta Faucet Company! No, there isn't a way to increase the flow rate of the TRINSIC® Tub Spout MODEL#: RP73371BL. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Chand! Thank you for contacting us at Delta Faucet! I will be happy to help. You can purchase the tub spout but keep in mind you will need a diverter trim kit installed so as to divert water between the shower head and hand shower. Please contact us directly if further assistance is needed at this time.  Best Regards,  ​​​​​​​ Tim

Hi Valued Customer, Thank you for your question regarding our Delta Faucet RP73371CZ. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. The tub spout does not have an aerator. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi RGG82, Thank you for your question about the Delta Faucet RP73371CZ. The tub spout is plastic for a durable non-metallic construction. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello Dank, Thank you for your question! I am happy to assist you! The Delta Faucet model RP73371BL tub spout has a 1/2" slip on installation. The brass adapter included with it is required for proper installation. Please contact us back with any further questions. Best Regards, Skyler

Hi tub spout delta site, Thanks so much for contacting Delta Faucet Company about RP73371CZ! Our standard delivery is 8-10 business days. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Good afternoon Mitchellized, Thank you for your question. We are happy to help! The shower rise, or stacking, you are describing with your Delta Faucet RP73371BL tub spout can be caused by several reasons. The tub spout should not be restricting the water and we would not recommend cutting the tub spout. 1) The valve could be upside down. 2) The length from the valve to the tub spout is outside of the 8" to 18" distance. 3) Something other than ½" smooth copper or galvanized pipe was used going to the spout. No push fittings. No "shark-bite" fittings. No cast or drop ear elbows. 4) Something restricting the water flow to the spout, e.g. solder or something lodged in the pipe. If this is the cause of shower-rise it is possible to remove the blockage by removing the tub spout; then, feeding a plumber’s snake or a speedometer cable up through the tub drop. The act of feeding it causes it to twirl and loosen the blockage. Be sure to flush the valve before reinstalling the tub spout. Be sure to check the tub spout itself for blockage. Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best regards, Bryan

Hello Judy, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model T14459-RB Monitor® 14 Series H2Okinetic® Tub & Shower Trim does not include a drain assembly and overflow plate. The Delta Faucet part RP693RB Bath Waste Assembly is recommended for a tub drain with the overflow and can be ordered separately. Please contact us back directly via email with any further questions. Best Regards, Skyler