Trinsic®
Ver toda la colección para baño Trinsic®

Tubo de salida para bañera - Desviador con tirador hacia arriba en acero inoxidable

N.º de modelo: RP73371SS
Agregar a favoritos
Busque instaladores locales de Delta®
Trinsic®
Ver toda la colección para baño Trinsic®
Tubo de salida para bañera - Desviador con tirador hacia arriba en acero inoxidable
N.º de modelo: RP73371SS
Precio de lista: $111.05
Precio en línea: $88.84
Envíos sin cargo para todos los pedidos de más de $49
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Esta salida de bañera con desviador deslizable hacia arriba Trinsic de 6 1/8" complementa la colección para baño Trinsic a la perfección. En toda su casa, usted puede contar con la fiabilidad de los productos de Delta, incluidos nuestros accesorios y piezas de repuesto. Respaldamos todos los artículos con nuestra garantía limitada de por vida.
  • Combina con la colección para baño Trinsic (se vende por separado).
  • Desviador deslizable
  • Longitud total de 6 1/8".
  • Salida de bañera deslizante para CWT de ½". .
  • Construcción no metálica duradera.
  • Se incluye el conjunto de adaptador RP33794
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Technology and Special Features
Acabado Brilliance®
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver hoja de mantenimiento e instalación
Registrar su producto
Recursos
Archivos de diseño
Información de instalación
Altura total:
3 7/32
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of 5 by from Do Not Buy I purchased this tub spout as part of a kit from amazon, and immediately the diverter did not fully function. The spout was leaky and had poor water pressure out of the shower head. I filed a warranty claim and was send a second unit, which worked great for one shower, then got stuck in the down position and I had to yank it up with pliers to unstick it. now it does not go fully up or down and still leaks.
Date published: 2024-07-24
Rated 1 out of 5 by from It is too bulky The spout is bulky, the pull up diverter is insecure, and overall we are not pleased.
Date published: 2020-08-24
Rated 4 out of 5 by from Does the job [This review was collected as part of a promotion.] The spout is sturdy and simply attractive. It works well with our other fixtures and tubular sink faucet.
Date published: 2017-12-09
Rated 5 out of 5 by from Ordered for a client with the Trinsic shower set. As always with Delta, great looks and complete package of coordinating pieces. Very sleek and modern without being too edgy.
Date published: 2017-09-11
  • y_2024, m_9, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_RP73371SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 9ms
  • reviews, product
Preguntas y respuestas

Where are the documents and installation instructions? Come on...

It is 2017, get your website in order.
Asked by: Brad
Dear Brad, Thank you for your inquiry! The RP73371SS is the tub spout that comes with the Trinsic 14 Series Tub and Shower T14459-SS model. The tub spout will include a brass slip-on adapter (RP33794) that you can remove from the tub spout. The 1/2" copper pipe should extend 2" to 4" from the finished wall. Install the adapter so that there is a 1/4" to 1/2" between the adapter and the finished wall. Tighten the set screw, then thread the tub spout onto the adapter. Please page 5 of the below Maintenance/Installation document link, for these directions. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Tanya
Answered by: Tanya
Date published: 2024-03-28

installation instructions?

Asked by: david
Thank you for your inquiry, David! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen on page 5 module 2 C-1 of the maintenance and installation manual (link below). The o-ring inside the tub spout will provide a proper seal. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Tub spout I purchased, marked 00125-773502 L-2-3, came with adaptor. Manual page 5, C-4, suggests soldering adaptor to copper. But it has an inner O-ring, therefore can't solder. Or is it a slip-on as in C-1? Is that O-ring is enough of a seal?

Asked by: wayne
Thank you for your question, Wayne! This tub spout is only designed for a slip-on connection to a 1/2" smooth copper pipe with the set screw as seen in C-1 of the maintenance and installation manual. The o-ring inside the tub spout will provide a proper seal. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Where can I find the installation instructions for this spout RP73371?

Asked by: Beth
Thank you for your question, Beth! I have included a link to a maintenance and installation sheet, that covers several tub spouts we manufacture. For installation instructions on model RP73371, please refer to page 5, diagram C1. If you need further assistance, feel free to contact us directly. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Can I use the Delta Faucet RP12307 Adapter with O-Ring with this tub spout? 

Asked by: Trim Less Showerhead
Hi Trim Less Showerhead! Thank you for your inquiry. The RP73371BL tub spout is only meant to be used with the slip on adapter RP33794 and unfortunately can not be interchanged with the RP123007 adapter. https://media.deltafaucet.com/MandI/68881%20Rev%20M.pdf Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28

This tub spout came with my shower/tub model T17T459-H2O. Tub spout came with a brass tub adaptor which includes 2 o-rings & set screw to install the brass adaptor. How far should brass adaptor slide over the 1/2" copper line to tighten set screw? 

Asked by: AllisonPA
AllisonPA, Thank you for your question! We recommend that the copper pipe be 2" to 4" from the finished wall. The back of the adapter should be 1/4" to 1/2" from the finished wall when installed. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

WHAT IS THE LENGTH?

Asked by: AMBER
Thank you for your question, AMBER! The Delta tub spout model RP73371 is exactly 6 3/16" (157 mm)long. https://media.deltafaucet.com/SpecSheet/DSP-B-T17T059%20Rev%20D.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Which adapter is the right for this? The Delta Faucet RP33794 or the Delta Faucet RP12307? Thanks!

Asked by: martin
HI Martin! Thank you for your question. This model RP 73371 is a slip on tub spout will include a brass slip-on adapter (RP33794). Best regards, Edward
Answered by: DeltaFaucet234
Date published: 2024-03-28
  • y_2024, m_9, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_40
  • loc_en_US, sid_RP73371SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 30ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California