17 Thermostatic Tub and Shower Only in Lumicoat® Chrome

Hi, Haleyann88! Thank you for your question. The Delta T11876-BL 3 Setting Diverter trim kit will match the Delta TempAssure T17T476-BL Tub and Shower unit. This will allow to add a hand shower along with the shower head to have both on together or separately. Here is a link to the unit: https://www.deltafaucet.com/bathroom/product/T11876-BL Best Regards, Rosanna

Hello Andrew, Thank you for your question. The shower head, tub spout and trim of the Delta Stryke Thermostatic Tub and Shower T17T476-BL uses either metal and plastic combination or a proprietary mixture of components so that the product has a high quality, while maintaining safety control with the various temperatures of water that go through the product. Delta Faucet Company takes extreme pride in the quality of its products, and strives daily to meet and exceed the expectations of our customers. Best regards, Tanya

Thank you for your question, Mveselica! Yes, the 17T series Stryke shower trim can be purchased without a shower head. Model T17T076 is the valve trim in the Stryke series, without a shower head or tub spout. https://www.deltafaucet.com/bathroom/product/T17T076 Best Regards, Benjamin

Hi, Jcn2! Thank you for your question. The Delta TempAssure T17T476 Tub and Shower Unit flow rate will depend on the psi for your home. For 60 -80 psi the flow rate will be between 7.3 -9.9 gpm. Two shower units will work together with a 6 setting diverter as most shower heads are no more than 2.5 gpm. Best Regards, Rosanna

Hi Mike, Thank you for your question about the Delta Faucet model T17T476. The temperature lever does pop or snap off. It does not use a set screw. I recommend trying to unsnap at the top of the knob, then unhook on the bottom side with the lever. See the parts diagram for more information: https://media.deltafaucet.com/PartsDiagram/DPD-B-T17T076.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Anne, Thanks for your question regarding T17T476-CZ! The Thermostatic Valve Only is T17T076-CZ and the Diverting Tub Spout is RP93376CZ. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Mary, thank you for your interest in the T17T476! Our T11876-BL 3 Setting Diverter trim kit will match the Delta Temp Assure T17T476-BL Tub and Shower unit. This will allow adding a hand shower along with the shower head to have both on together and separately. Please view the link below. https://www.deltafaucet.com/bathroom/product/T11876-BL Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hi Keith, Thanks so much for contacting Delta Faucet Company! It sounds as though the rotational limit stop may need to be adjusted on the STRYKE® 17 Thermostatic Tub And Shower MODEL#: T17T476. The rotational limit stop is used to limit the amount of hot water available such that, if set properly, the user will not be scalded if the handle accidentally is rotated all the way to “hot” when a person is showering or filling a tub. The first position allows the LEAST amount of hot water to mix with the cold water in the system. In the first position, the water will be the coldest possible when the handle is turned all the way to hot. As you move the rotational limit stop counterclockwise, you progressively add more and more hot water in the mix. The last position to the left will result in the greatest amount of hot water to the mix, and the greatest risk of scald injury if someone accidentally turns the valve handle all the way to the hot side while showering or filling a tub. To adjust the temperature of the water coming out of the valve, pull the disc back to a position where it is possible to remove the rotational limit stop and readjust the teeth engagement position to the desired temperature. Clockwise will decrease the outlet temperature, and counter-clockwise will increase the outlet temperature. Temperature change per tooth (notch) could be 4° - 16°F based on inlet water conditions. Repeat as necessary. Push the disc until fully seated. If you want installation help, contact our residential warranty line directly at 800-345-3358 (prompt 2, then 4). We also have how-to videos on our website and our YouTube channel. https://www.deltafaucet.com/service-parts/how-to-videos Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist