Delta®
Llave para llenar ollas de montaje en pared estilo contemporáneo en Champagne Bronze
N.º de modelo: 1165LF-CZ
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
Llenar ollas en el calentador nunca fue tan fácil ni económico gracias a la nueva llave para llenar ollas de Delta. Con un precio muy competitivo, la llave para llenar ollas que cumple con la Ley para Estadounidenses con Discapacidades (ADA, por sus siglas en inglés) incluye montaje en pared, diseño de articulaciones oscilantes dobles con válvulas de cierre dobles y un caudal de 4 GPM para llenar ollas grandes en un instante. Una llave para llenar ollas facilita el proceso de llenar recipientes grandes para cocinar, sin tener que ir del lavabo al calentador.
- El cierre doble de Delta en la llave para llenar ollas permite al usuario cerrar el agua en la pared o en la salida de tina para controlar el flujo de agua en el punto de uso
- Las articulaciones oscilantes dobles de 24 in permiten que la llave para llenar ollas se pliegue de manera simple cuando no se utiliza.
- Apertura y cierre sencillos con un cuarto de giro de la manija
- Diseño de dos manijas para un funcionamiento sencillo
- Cumple con las normas de la Ley para Estadounidenses con Discapacidades (ADA, por sus siglas en inglés)
- Instalación con un solo orificio
- Dimensiones una vez montado: 8-1/8 in. H x 21-9/16 in. D x 2-1/8 in. W
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Libres de plomo
Libres de plomo
Cumplimiento con la legislación estatal y federal de agua potable.
Acabado Brilliance®
Acabado Brilliance®
Muchos productos de Delta se fabrican con acabados Brilliance®, que resisten el desgaste y la decoloración mejor que el bronce tradicional o incluso el cromo.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación para montaje en pared con un orificio.
Longitud total:
21 9/16
Altura total:
8 1/8
Voltaje:
0
Caudal:
4.0 gpm a 60 psi, 15.1 l/min. a 414 kPa
Tipo de válvula:
Válvula de cerámica
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-Master-RP76954]()
Delta®
Delta® Kit de montaje - Montaje en pared
Precio de lista: $55.15 - $84.50
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP76954
View Product
![Image-Master-RP64633]()
Delta®
Delta® Aireador - Llave para llenar ollas - 4.4 GPM
Precio de lista: $14.80 - $15.30
Acabados estándar
RP64633
View Product
![Image-Master-RP76953]()
Delta®
Delta® Kit de manija tipo palanca de metal con cartucho de válvula - Llave para llenar ollas
Precio de lista: $85.55 - $107.60
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP76953
RESEÑAS
Rated 5 out of
5
by
Joy from
Beautiful
The color is great & the quality is excellent. Goes well with my remodel.
Date published: 2024-08-02
Rated 2 out of
5
by
Neha from
Great look but gets brownish water
I bought this for our kitchen remodel based on the reviews. But when i first run the water it gives brownish water and after one pitcher i get clean water. Checked with plumber he said might be the rust inside the pot filler pipe which making it brownish every time i run it for the first time. I have delta faucets in my kitchen and i’m very happy with those but pot filler is not a great option.
Date published: 2024-04-03
Rated 1 out of
5
by
Anonymous from
Failed in 14 months
One of the two valves stopped working with light use. installed Dec 2022 and failed March 2025.
Date published: 2024-03-25
Rated 5 out of
5
by
Mike S from
Construction superintendent
Delta has been my go to brand for decades. You can’t go wrong with them. They make a very nice pot filler with quality in mind
Date published: 2024-02-26
Rated 5 out of
5
by
Elisa from
I Love My Pot Filler
I love my pot filler! We cook at home frequently and it’s a great addition to our kitchen.
Date published: 2024-02-24
Rated 5 out of
5
by
Thalia from
Always Wanted One!
I always wanted a pot filler so when we were renovating our kitchen this Delta Pot Filler with its modern lines fit our aesthetic. We ordered the champagne bronze finish and it goes perfectly with our stone.
Date published: 2024-02-16
Rated 5 out of
5
by
Joe0523 from
Customer Service
Delta is guaranteed for life - so no questions asked new parts are sent. You can’t beat that. But after numerous calls and posting questions here, I never received a correct answer. So here’s the answer: To replace a valve, 1) You unscrew the grab handle , then you will need an Allen key to unscrew/remove the round part of the handle- from them it’s a Philip drive and wrench to remove the valve. BUT the handle doesn’t come just by grabbing and pulling as it will break 💯- you need an Allen key. The manual doesn’t provide this crucial bit of information ….
Date published: 2024-01-31
Rated 5 out of
5
by
Hkshah from
Potfiller
Love this potfiller! Definitely harder to match the color, so we just stuck with the other Delta products that were the same champagne bronze color.
Date published: 2024-01-26
Preguntas y respuestas
When will Champagne Bronze be available?
When will Champagne Bronze be available?
Hi San,
Thank you for your question! The Champagne Bronze Pot Filler should be available in stores in early September of this year.
Best regards,
Jon
Date published: 2017-07-28
Whats the difference between the stainless finish & the arctic stainless finish on your pot filler? I currently have brushed nickel fixtures & would like to get as close as possible to match the existing.
Hi Kevin,
Thank you for your inquiry! Arctic Stainless is a brushed finish like Stainless Steel. Over the years, the color of stainless steel used on appliances and sinks has migrated from warmer tones, with more red in the color spectrum, to lighter tones where blue is more predominant. Arctic Stainless features cooler metallic tones, following a trend seen throughout the kitchen. Stainless Steel is has warmer tones, similar to brushed nickel.
Best regards,
Tanya
Date published: 2024-03-28
Does this pot filler (1165LF-SS) require a valve body within the wall and, if so, what is the model number(s)?
Need to install pot filler in a new house still under construction. Does this pot filler need a valve body within the wall similar to tub/shower valve bodies? If there is one, does it come with it or does it need to be ordered separately? Also, what is the model# of the valve body?
Hi Rob,
Thank you for your question! This unit will included everything needed for the installation. It connects directly to a 1/2" IPS supply pipe.
Best regards,
Jon
Date published: 2016-11-30
Can I have a manual or instructions on how to leave the preparation in the wall?
Dear Juan Camou,
Thank you for your question. Below, I have attached the Maintenance/Installation Owner's Manual and Technical Specification documents for the Delta Wall Mount Pot Filler 1165LF.
https://media.deltafaucet.com/MandI/86362%20Rev%20A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-K-1165LF%20Rev%20C.pdf
Best regards,
Tanya
Date published: 2017-10-04
What is the material of the 1165lf-ss?
Thank you for your question, kcla. This faucet is primarily Brass (spout) and Zinc (handles).
Best regards, Jon
Date published: 2024-03-28
Is this product compliant with California lead laws?
Thank you for your question, 341Glenn! All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act.
Best regards, Edward
Date published: 2024-03-28
I want to install this faucet so that when the faucet is folded up and against the wall it is the center of my wall.
In order to do this I need to know the dimension from end to end when folded flat and the measurement showing the center of where the faucet connects to the wall from each end of the folded flat faucet. (example, the center of the connection to the left end is X inches and the center of the connection to the right end is Y inches). Then I will be able to determine where to make my 1" rough in faucet supply. Thank you.
Hi Reed,
Thank you for your question. The aerator will line up with the center of the supply connection when the spout is folded. When folded, the center of the upper arm joint to the center of the supply will be 10.5", and the end of the handle extends past the center of the supply by 2.1".
For more information, please see the Technical Specifications:
http://www.deltafaucet.com/customersupport/documentation/1165lf-ss.html?document=ts&fromDetailArea=kitchen&documentIndex=0#flashWrapper
Best regards,
Jon
Date published: 2024-03-28
How do I change out the handle and valve cartridge on the 1st valve? “Closest one to the water inlet.” Is there how to videos somewhere on this? There is nothing on YouTube.
Hi, Darren!
Thank you for your question. To change the valve cartridge assembly for the Delta 1165LF Pot Filler, first remove the handle assembly. Once the handle is removed, remove the screw and base with a Philip's screwdriver. The valve cartridge assembly can then be pulled straight out and a new one can be reinstalled.
Best Regards,
Rosanna
Date published: 2024-04-01
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.