Llave para llenar ollas de montaje en pared estilo contemporáneo en acero inoxidable

Hi Rob, Thank you for your question! This unit will included everything needed for the installation. It connects directly to a 1/2" IPS supply pipe. Best regards, Jon

Dear Juan Camou, Thank you for your question. Below, I have attached the Maintenance/Installation Owner's Manual and Technical Specification documents for the Delta Wall Mount Pot Filler 1165LF. https://media.deltafaucet.com/MandI/86362%20Rev%20A.pdf https://media.deltafaucet.com/SpecSheet/DSP-K-1165LF%20Rev%20C.pdf Best regards, Tanya

Thank you for your question, 341Glenn! All Delta Faucet Company products meet or exceed the requirements of applicable product performance and safety industry standards, as well as the federal Safe Drinking Water Act. Best regards, Edward

I received a replacement cartridge and handle for my leaking pot filler 1165LF. Unfortunately no instructions are included. While searching for how to replace the cartridge I found conflicting and confusing instructions. It would be great if clear instructions and even a video link came with the parts. Step 1 is to unscrew the round cylinder handle piece from the circular handle piece attached to the the pot filler faucet (there are two handles, so this is for whichever cartridge behind the handle needs to be replaced). Then use a hex screw bit to unscrew and remove the circular handle piece. Now you can continue be removed the cartridge screw and the cartridge. Key thing to note from other posts I found regarding this is you cannot just pull handle off. It is screwed into the faucet arm which the above steps handle (no pun intended)

Hi, Christine! Thank you for your question. The Delta 1165LF Pot filler is double jointed and both joints will turn right and left. Best Regards, Rosanna

Dear Joe, Thank your for your question! We do not recommend using hot water for the Delta Wall Mount Pot Filler 1165LF, for safety protection reasons. Best regards, Tanya

Hello Duts, Thank you for your question. Delta only manufactures the Wall Mounted Pot Fillers 1165LF and 1177LF models. These units can not be deck mounted. Best regards, Tanya

Dear Teresa, Thank you for your question. The Delta Wall Mount Pot Filler Faucet 1165LF, when folded up, it has a 1 1/2" measurement from the wall to the front of the widest part of the end where the water comes out. The measurement from the handle to the wall is 4 3/4". Best regards, Tanya

Dear Cara, Thank you for your inquiry! The Delta Wall Mount Pot Filler 1165LF-BL is scheduled to start shipping at the end of August 2017. Best regards, Tanya

Hi, kJ-NewOlreans! Thank you for your question. The faucet cannot be deck mounted. This faucet, 1165LF, can only be mounted to the wall. Best Regards, Rosanna

Hi San, Thank you for your question! The Champagne Bronze Pot Filler should be available in stores in early September of this year. Best regards, Jon

HI mjp2732, Thank you for your question. You can order the model 1165LF-AR pot filler from your local retailer or wholesaler that sells Delta products. The allowable order date for this model was 8/22/2014. Thanks, Dave

Thank you for your question, Red1967! We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA and Panyu, China. As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure the highest quality and long-lasting performance. The back or bottom of the box will tell you where your specific faucet model was made. Best regards, Edward

Thank you for your question, maroos! This faucet includes everything needed for the installation as it connects directly to a 1/2" pipe nipple. Please refer to page 2 of the Installation Instructions for more information: https://media.deltafaucet.com/MandI/86362%20Rev%20B.pdf Best regards, Jon

Thank you for your inquiry, Randy! We do not have a recommended or ideal height for the Delta Contemporary Wall Mount Pot Filler 1165LF model. We leave it up to you, our customer/installer, to pick what height is best for you! Best regards, Tanya

Hi, dekordesigns. Thank you for your question. Unfortunately, the spout is not reversible so that it can stack down. This will only stack up. Best Regards, Rosanna

Hi Brandi, Thank you for your question. Unfortunately neither the model 1165LF or any of our other pot fillers are compatible with RO systems. Thanks, Dave

Hi Buddy, Thank you for your question about the Delta Faucet model 1165LF-SS Contemporary Wall Mount Pot Filler In Stainless. I am sorry this information was not readily available, and I am happy to help! Please be sure to turn off the water supplies before disassembling the faucet. The handle can be removed by pulling it toward you. It is held onto the splines by friction. You can use an adjustable wrench to unscrew and replace the cartridge. We recommend hand tightening the cartridge, then turning it a 1/4 turn with a wrench. Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

After many hours of trying to remove the handle to replace the valve cartridge, we finally talked to customer support and Doug (EXTREMELY GREAT CUSTOMER SERVICE!!!!), actually took the time to go find the product, assembled and disassembled it himself and gave us the solution! The solution: Unscrew the “stem” (the skinny part you use to turn the handle) of the faucet handle. Inside the hole it leaves, there is a set screw which can be loosened with an allen wrench. With it loosened, the entire faucet handle  easily slides off and exposes the valve cartridge. Use a phillips screwdriver to remove the screw in front of the valve cartridge and then use a deep well socket to remove the valve cartridge. Assemble in reverse order making sure to line up handles with valve in closed position before pushing handle into place. 

Hello donna, Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 1165LF-SS Contemporary Wall Mount Pot Filler In Stainless is manufactured for cold water only, We do not recommend using hot water. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Mike, Thank you for your question! I am happy to help you! We do not recommend to use any of our Delta products outside, as the warranty only covers manufactured defects. Please contact us back for any further questions. Best Regards, Nicole

Hello Mark, Thank you for your question, I would be happy to help you. The Stainless Steel finish on the pot filler is the same as the SpotShield stainless finish on the Trask kitchen faucet. Please contact us back for any further questions or concerns. Best Regards, Nicole

Hi NCORTEZ3526, thank you for your interest in the 1165LF-CZ! We are happy to assist you! We have reached out to you directly via email in regard to this matter. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Hello DanO, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! We do not have a preference on height during installation, I have included a link to our Delta Faucet DELTA® Contemporary Wall Mount Pot Filler MODEL#: 1165LF technical specifications to show the measurements. https://media.deltafaucet.com/SpecSheet/DSP-K-1165LF%20Rev%20E.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Ellen, Thanks so much for contacting Delta Faucet Company! No, the Contemporary Wall Mount Pot Filler MODEL#: 1165LF attaches to the wall and can be used with any appliance or in any location in the kitchen. Depending on where you will be filling your pots. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hello Mike! Thank you for your question and we are happy to help! The Delta 1165LF-AR has a 1/2" IPS supply line and seals with the mounting kit RP76954 which includes a gasket along with the threaded seal. With any further questions or concerns, please do not hesitate to reach out to us directly. Best Regards, Carrie

Thank you for your question, Brian67! I do apologize for the inconvenience with the handle, but will be more than happy to help! The handle on model 1165LF can be removed by pulling it forward. It is held onto the splines by friction. You can hand tighten the cartridge, then turning it a 1/4 turn with a adjustable wrench. Feel free to contact us directly, if you need further assistance. Best Regards, Benjamin

Hello Jon D, Thank you for your question! I am happy to help you! The Delta 1165LF is manufactured to be installed above the stove, we recommend to push it back to the wall when not in use. Please contact us back for any further questions. Best Regards, Nicole

Hello Doyle! Thank you for your question and we are happy to help. We apologize for this information not being readily available to you. The Delta Faucet Contemporary Wall Mount Pot Filler In Matte Black MODEL#: 1165LF-BL matches the faucets linked below: https://www.deltafaucet.com/kitchen/faucets/pull-downpull-out?cgid2=Delta_Kitchen_Sink-Faucets_Pull-Down%2fOut&prefn1=finish&prefv1=Matte_Black&prefn2=narrowResults&prefv2=hideDiscontinued&prefn3=recertified&prefv3=false With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta Faucet customer. Best Regards, Carrie