Delta®
Llave para llenar ollas de montaje en pared estilo tradicional en Venetian Bronze
N.º de modelo: 1177LF-RB
- CARACTERÍSTICAS DEL PRODUCTO
- Documentos y especificaciones
- RESEÑAS
- Preguntas y respuestas
- LISTA DE PIEZAS
CARACTERÍSTICAS DEL PRODUCTO
Llenar ollas en el calentador nunca fue tan fácil ni económico gracias a la nueva llave para llenar ollas de Delta. Con un precio muy competitivo, la llave para llenar ollas que cumple con la Ley para Estadounidenses con Discapacidades (ADA, por sus siglas en inglés) incluye montaje en pared, diseño de articulaciones oscilantes dobles con válvulas de cierre dobles y un caudal de 4 GPM para llenar ollas grandes en un instante. Una llave para llenar ollas facilita el proceso de llenar recipientes grandes para cocinar, sin tener que ir del lavabo al calentador.
- El cierre doble de Delta en la llave para llenar ollas permite al usuario cerrar el agua en la pared o en la salida de tina para controlar el flujo de agua en el punto de uso
- Las articulaciones oscilantes dobles de 24 in permiten que la llave para llenar ollas se pliegue de manera simple cuando no se utiliza.
- Apertura y cierre sencillos con un cuarto de giro de la manija
- Apertura y cierre sencillos con un cuarto de giro de la manija
- Cumple con las normas de la Ley para Estadounidenses con Discapacidades (ADA, por sus siglas en inglés)
- Instalación con un solo orificio
- Dimensiones una vez montado: 8-17/32 in. H x 26-31/32 in. D x 2-3/8 in. W
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Libres de plomo
Libres de plomo
Cumplimiento con la legislación estatal y federal de agua potable.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación para montaje en pared con un orificio.
Altura total:
8 17/32
Voltaje:
0
Caudal:
4.0 gpm a 60 psi, 15.1 l/min. a 414 kPa
Tipo de válvula:
Válvula de cerámica
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
LISTA DE PIEZAS
LISTA DE PIEZAS
View Product
![Image-RP61824]()
Addison®
Addison® Cartridge Fluehs - Cold
Precio de lista: $73.00
Precio en línea: $58.40
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP61824
5.00 2
View Product
![Image-Master-RP64633]()
Delta®
Delta® Aireador - Llave para llenar ollas - 4.4 GPM
Precio de lista: $14.80 - $15.30
Acabados estándar
RP64633
View Product
![Image-Master-RP74972]()
Delta®
Delta® Kit de manija tipo palanca de metal con cartucho - Llave para llenar ollas
Precio de lista: $82.25 - $109.75
Envíos sin cargo para todos los pedidos de más de $49
Acabados estándar
RP74972
RESEÑAS
Rated 5 out of
5
by
JP Fix It LLC from
My Customer Was Thrilled
My customer was thrilled with the look, feel and performance of this pot filler.
Date published: 2024-07-30
Rated 1 out of
5
by
Danny from
Leaks
We have only had this pot filler for a few years and it leaks from multiple spots.
Date published: 2024-04-14
Rated 5 out of
5
by
Redecor friend from
Gorgeous and functional
Very heavy and works well. Love the dual turn on off to protect from leaks
Date published: 2024-03-17
Rated 1 out of
5
by
TJ 67 from
Leaking
After 2 years, this product started leaking at the middle joint. Was charged $350 by plumber for repairing.
Date published: 2024-02-08
Rated 1 out of
5
by
Jessica from
Leaking and I'm told that it's garbage
this is leaking from the middle joint and i'm gobsmacked that there's no possibility of repair.
Date published: 2023-09-15
Rated 5 out of
5
by
KBS Palm Beach Gardens from
Decorative Accent
Beautiful piece. Accents the backsplash, it is decorative and functional. Makes our showroom that much more appealing and custom for our clientele.
Date published: 2023-08-21
Rated 1 out of
5
by
Anonymous from
Right fixture, wrong finish
Right brand but not a polished nickel, chrome plated
Date published: 2023-08-14
Rated 3 out of
5
by
KL from
Loved it till it leaked.
Middle swing joint is leaking and the bottom round cover of middle swing joint has came off. Our parts diagram doesn't show available parts to fix middle swing joint.
Date published: 2023-07-22
Preguntas y respuestas
Is Venitian bronze a gray color?
Thank you for your question, fitz! Venetian Bronze is a deep chocolate brown color with copper brush strokes throughout.
Best regards, Edward
Date published: 2024-03-28
is it possible to unscrew the nipple the areator is on so it points down when the valve on the wall is installed opposite of what is shown.
the rough in is to tall for the configuration of the faucet. I want ti flip it
Hi barton,
Thank you for your question. The faucet must be installed right-side up.
Best regards,
Jon
Date published: 2024-03-28
What sink faucet system best matches the traditioinal wall mount pot filler?
Hi Catherine,
Thank you for your question! Since the Pot Filler is not part of a specific design collection, any of our Traditional style faucets will match some of the design aspects. Please click the link below to browse our selection of kitchen faucets with a Traditional design style.
http://www.deltafaucet.com/kitchen/faucets/filter-results.html?sort=pricehighlow&finish=ss&style=kitchen-traditional
Best regards,
Jon
Date published: 2024-03-28
Valve Orientation
I have installed this pot filler slightly right of the cook top so it is centered a little better when folded. When folded the top valve (closest to where the water is dispensed) points directly at the back wall when folded if it is in the "closed" position. This means that if I fold the pot filler back and leave it in the closed position the end would hit my wall. Can this be changed so the valve points forward instead of backward? Also, I though it was odd that a clockwise turn caused the water to turn on instead of off, like most faucets. Can this be changed/adjusted?
Thank you for your question, TY. While the direction of the handle rotation cannot be changed, you can change the position of the handle when it is off. To do this, turn off supplies, then remove the cap and screw. Pull off the handle, then reinstall it onto the spines where you would like it in the off position.
Best regards,
Jon
Date published: 2017-12-29
The arms on my pot filler are not parallel when in the closed position. The elbows are tight, with no play in them(as they should be). How can this be fixed? I haven’t installed it yet. Thanks
Hi, BobbyR!
Thank you for your question. The 1177LF pot filler should fold and arms should be parallel. The elbows should not be tight and fold smoothly. We do recommend to return back to the store if this one is not working correctly, as it should.
Best Regards,
Rosanna
Date published: 2024-03-28
Does this pot filler fit stylistically with any other faucets in the kitchen collection?
Hi, Jason!
Thank you for your question. The Delta 1177LF pot filler fits our Traditional style faucets. Here is a link to these types of faucet:
https://www.deltafaucet.com/kitchen/sink-faucets?StyleIsTraditional=T&facetFinish=chrome
Best Regards,
Rosanna
Date published: 2024-03-28
Is there a recommended min - max height for install of this unit
Thank you for your question, Jb! We do not have a recommended or ideal height for the Delta Traditional Wall Mount Pot Filler 1177LF model. We leave it up to you, our customer/installer, to pick what height is best for you!
Best regards,
Tanya
Date published: 2024-03-28
Why is this product not available in and not shipped to CA?
I can't buy it here in CA and nobody will ship it here - why?
Hello Phil W,
Thank you for your question. Due to recent California mandates, faucets installed in the kitchen and lavatory are required to have a flow rate of 1.2 GPM or less. Delta model 1177LF-SS has a flow rate of 4.0 GPM.
Best Regards,
Courtney
Date published: 2016-11-21
Where is model 1177LF made, country of origin?
Hi, Jimw!
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance.
The location information on the back of the box will tell you where your specific faucet model was made.
Best Regards, Rosanna
Date published: 2024-03-28
What is the closest match to Brushed nickel ?
Thank you for your question, Chris! The Stainless Steel finish is a very close match to brushed nickel.
Best regards, Jon
Date published: 2024-03-28
Is this pot filler all metal or are there some plastic parts?
Aside from gaskets it is all metal
Date published: 2024-03-28
When mounting this pot filler over the stove do you mount it centre or off centre in order for it to look centered when it sits against the wall?
Hi, tara!
Thank you for your question. There is no required place that we advise. We do leave it up to the consumer to determine where they would like to install the pot filler on their wall.
Best Regards,
Rosanna
Date published: 2024-03-28
At what height does Delta recommend installing a pot filler ?
Hi, Becky!
Thank you for your question. We do not have a recommended height to install the Delta 1177LF pot filler. We leave this decision up to the user.
Best Regards,
Rosanna
Date published: 2024-03-28
I have the pot filler 1177LF-SS in brilliance stainless. I am looking to purchase a kitchen faucet that matches that finish and style. Is there another finish that matches the brilliance stainless?
Hi, cjohnson!
Thank you for your question and for your interest in our Delta faucets. The style of this 1177LF-SS is Traditional. You can find matching, Traditional-style faucets under the 'Kitchen Faucets' link here:
https://www.deltafaucet.com/kitchen/sink-faucets
You can choose to filter out options such as 'Style', 'Finish', 'Type', etc.
The Brilliance Stainless Steel finish will match up with faucets that have 'SS' (Stainless Steel) in the model number.
Best Regards,
Rosanna
Date published: 2024-03-28
Upside down
Is it possible to install this upside down? I want the supply pipe at the top and the spigot on the bottom.
Hi Tom,
Thank you for your question! Unfortunately, this faucet cannot be installed upside down.
Best regards,
Jon
Date published: 2024-03-28
Is there a kitchen sink faucet that matches the pot filler faucet?
Hi Taxime03,
Thank you for your question. The Delta Pot Filller 1177LF-AR does not have a specific matching collection style. Any of the Delta kitchen faucets in the Arctic Stainless (AR) finish could be installed with this pot filler.
https://www.deltafaucet.com/kitchen/sink-faucets
Best regards,
Tanya
Date published: 2024-03-28
Is this unit made from Brass & ok to use with an RO system?
Can this be hooked up to an Reverse Osmosis water filter?
I have seen other manufacturers not recommend using their pot fillers with RO water because it does not interact well with the brass insides of the fixtures.
Hi sjhanksaz, Thank you for your question. We would not recommend using an RO system with our model 1177LF-SS pot filler for the reasons stated in your question.
Thanks,
Dave
Date published: 2024-03-28
Does artic stainless or stainless match best with Wolf Professional appliances with a brushed stainless finish?
Hello, Rosanne,
Thank you for your question. Yes, either our Arctic Stainless or Brilliance Stainless Steel finishes should be the closest matching finishes we manufacture to a Wolf Professional Appliance Brushed Stainless finish.
Best regards,
Tanya
Date published: 2024-03-28
Is this pot filler lead free
Hello Lovingmy3E's,
Thank you for your inquiry! The Delta Traditional Wall Mount Pot Filler 1177LF and all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Best regards,
Tanya
Date published: 2024-03-28
The home I recently purchased is four years old. It has a Delta pot-filler above the gas range. I have noticed the spout drips some. Could you make suggestions as to how to remedy the problem?
Thank you for your question, Grumpy! I'm sorry to hear this pot filler is leaking and we would be happy to help. Under each handle is a valve cartridge. You can gain access to this by removing the button cover on the top of the handle. A screw holds the handle in place. The water must be turned off to the unit, or room before removing these cartridges. Even though the warranty only covers the original owner of the model, please know that any repair parts purchased would then be covered under our lifetime limited warranty. You will need to order RP74972SS if you have Stainless Steel as this will also include new handles.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP74972SS
Best regards, Edward
Date published: 2024-03-28
at what height should i leave the 1/2 pipe sticking out of the wall
delta 1177LF-SS pot filler
Hi Bob, Thank you for your question. We do not have a recommended height at which to install the 1177LF-SS pot filler. Appliance height, cabinet height, and other variables affect the placement of the faucet.
Thanks,
Dave
Date published: 2024-03-28
Has this pot filler been tested to see if it is compatible with reverse osmosis?
Hello, Heidi. Thank you for your question. We do not recommend using our Pot Fillers with reverse osmosis systems. At this time, only our Beverage Faucets can be used with reverse osmosis.
https://www.deltafaucet.com/kitchen/specialty-faucets/beverage
Best regards, Jon
Date published: 2024-03-28
Lead free?
If this faucet lead free?
Thank you for your question, TC. Yes, all of our faucets intended to dispense drinking water (kitchen, specialty, and lavatory faucets) have lead free waterways.
Best regards,
Jon
Date published: 2024-03-28
Where is this made?
Hi, Jimw!
Thank you for your question. We manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA (and Panyu, China). As a global manufacturer, we also source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured or assembled, they are built to Delta Faucet Company’s exacting specifications and are quality tested to ensure long-lasting performance.
The location information on the back of the box will tell you where your specific faucet model was made.
Best Regards, Rosanna
Date published: 2024-03-28
I am installing a new kitchen and with a wolf cook top. I am in a Delta DL1177LF-CZ how high above the cook top do recommend installing the 1/2" supply.
Thank you for your inquiry, Jack! Yes, the Delta Traditional Pot Filler 1177LF-CZ is recommended to be connected to a 1/2" IPS supply line that extends 1/2" past the finished wall surface.
Best regards,
Tanya
Date published: 2024-03-28
Can a water filter such as PUR be attached to this pot filler?
Hello, Cynthia!
Thanks for your question. A water filter can be installed onto this 1177LF Pot Filler faucet as long as it has compatible connections. However, we do not recommend to add a water filter to a Pot Filler faucet as it will greatly decrease the flow of water to fill a pot, etc.
Best Regards,
Rosanna
Date published: 2024-03-28
If I want the filler end to be centered on the range after install, what is the offset required for the installation of the nipple out of the wall?
Hi Dennis,
Thank you for your question. In the fully extended or folded (parallel with the wall) position, the spout end will be centered with the supply nipple.
Best regards,
Jon
Date published: 2024-03-28
Can the pot filler be hooked up to either hot or cold water lines. Does it matter
Hello JasonW,
Thank your for your question! We do not recommend using hot water for the Delta Wall Mount Pot Filler 1177LF, for safety protection reasons. This unit is designed for cold water only connection.
Best regards,
Tanya
Date published: 2024-03-28
If the pot filler is placed in the middle of the stovetop/range, would the heat from the range damage the valve of the pot filler?
Hi Ali, Thank you for your question. As long as the external temperature does not exceed 150 degrees the model 1177LF-SS faucet will not be affected. We recommend folding the pot filler back to the wall and away from the stove top when not in use.
thanks,
Dave
Date published: 2024-03-28
What matching style kitchen faucet would you recommend for this pot filler ?
Thank you for your question, Larry! The Delta Pot Fillers are not designed to match a specific collection but are intended to compliment many different styles. Model 1177LF-CZ most closely resembles the Cassidy Collection.
https://www.deltafaucet.com/kitchen/faucets/with-sprayer?searchFilter=true
Best regards, Edward
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.