Delta

Llave de agua fría purificada de transición cromada

N.º de modelo: 1920-DST
Delta
Llave de agua fría purificada de transición cromada
N.º de modelo: 1920-DST
Precio de lista: $31680
CARACTERÍSTICAS DEL PRODUCTO
Las llaves de agua fría purificada de Delta® son compatibles con diversos sistemas de filtrado para que disponga de agua potable purificada cuando la necesite y vienen en un abanico de estilos y acabados. Los dispositivos de aire están integrados dentro de la llave para facilitar el uso con un sistema de ósmosis inversa. Las llaves de agua fría purificada de Delta son solo para instalación de agua fría y son ideales para cualquier sistema de ósmosis inversa (RO, por sus siglas en inglés), sistemas de filtración de agua debajo de la encimera o enfriadores, pero no se pueden usar con tanques de calentamiento instantáneo. Si la instalación no requiere un dispositivo de aire, la conexión puede simplemente cortarse o enrollarse debajo de la encimera. Perfecta para la despensa, la cocina del mayordomo o el bar, pero lo suficientemente elegante como para aparecer junto a la llave principal. Las llaves con tecnología de sellado DIAMOND™ Seal de Delta funcionan como si fueran nuevas de por vida con un diseño patentado que reduce los puntos de fuga, es menos complicado de instalar y dura el doble que el estándar de la industria. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves de agua fría purificada de Delta están respaldadas por nuestra garantía limitada de por vida.
  • Funciona con sistemas de RO, sistemas de filtración de agua, enfriadores o como grifo de agua fría.
  • El tubo de salida gira 360°
  • Diseño con una sola manija tipo palanca.
  • Dispositivo de aire incluido con tubo de 1/4" para el sistema de RO y tubo de 3/8" para el desagüe.
  • Llave inglesa para ajustar la tuerca de montaje de manera segura.
  • Tubo de suministro integrado con accesorio de compresión de 3/8".
  • Gracias a la tecnología de sellado DIAMOND™ Seal, la instalación es más fácil y la llave funciona como si fuera nueva de por vida, ya que se reducen los puntos de fuga y la duración es dos veces superior en comparación con los productos estándar de la industria.
  • Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
  • Se recomienda instalar a una distancia mínima de 2 1/2" del zócalo.
  • Instalación con un solo orificio
  • Cumple con la ADA.
Technology and Special Features
Cumplimiento con la ADA
Libres de plomo
Documentos y especificaciones
Información de instalación
Instalación con un solo orificio
Instalación con un solo orificio
Altura total:
9 1/2
Voltaje:
0
Caudal:
1.5 gpm a 60 psi, 5.7 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

RESEÑAS
Rated 5 out of 5 by from Great! Great product at terrific price. Delivered promptly.
Date published: 2024-07-17
Rated 1 out of 5 by from Delta faucets I bought a delta faucet 5 years ago it started rotting from the inside out you have to disconnect it and flush the valves once in awhile.I hope it didn’t start rotting me out “Idiots”.
Date published: 2024-03-29
Rated 5 out of 5 by from Cold water only faucet Works very well and is quiet
Date published: 2024-01-26
Rated 3 out of 5 by from Looks nice but noisy! Looks great but it is noisy when the air pressure is released. Sometimes goes on for 30 minutes!
Date published: 2023-12-24
Rated 4 out of 5 by from Champagne Bronze I bought this to coordinate with the Delta faucet and soap dispenser I also bought in champagne bronze, however, this faucet is darker than the other two which is disappointing. I ended up keeping it just because trying to get something that matches better is next to impossible but I see it everyday and it just bugs me. Im probably more picky than I need to be but I just expected the same brand of all to be the same color in champagne bronze
Date published: 2023-03-12
Rated 2 out of 5 by from Nice Looking but Loud and leaks at the top I bought this a few months ago when we remodeled our kitchen. Had a guy hook it up to our RO system. It looks great and functions good but when we use it and the RO system fills, it makes a gurgling sound and leaks at the top near where the faucet attaches to the countertop. We have to constantly leave paper towels to soak up the leaking water.
Date published: 2022-12-10
Rated 1 out of 5 by from Not Compatible with RO This unit is advertised as being compatible with an under sink RO system. However, the tubes do not plug and play like the one that comes with the RO system. What adapter am I supposed to use? If I can't get it to work I will have to return.
Date published: 2022-08-02
  • y_2024, m_10, d_17, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_1920-DST, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 13ms
  • reviews, product
Preguntas y respuestas

What are the measurements of this beverage faucet?

Asked by: mgmmsw
Hello mgmmsw, Thank you for your question about the Delta Faucet model 1920-DST Transitional Beverage Faucet In Chrome. I apologize for any difficulty finding this information. We are happy to help! The spout height is 6-1/16". The total height is 9-1/2". See the specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-K-1920-DST%20Rev%20A.pdf Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

is there a pull out kitchen faucet to match the 1920-ar-dst?

Asked by: jim 121
Hello Valued Customer. Thank you for contacting Delta Faucet Company! We have a variety of faucets that will match our 1920-DST beverage faucet, however, we do not have a specific collection that will match. Please refer to the link below to browse through our pull-down kitchen faucets. https://www.deltafaucet.com/kitchen/faucets/pull-downpull-out We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2024-04-12

Our beverage faucet is dripping from the handle when running water. I think I can make the repair myself but can’t figure out how to remove the handle to get to the cartridge.There is no set screw. I cannot find our model #, and it is not pictured on as

Asked by: Friendlytexan
Hi Friendlytexan, Thank you for your question! Our beverage faucet handles use a set screw. It may be underneath a cover button. Look for a notch on the button or use a plastic card or non-metallic tool. With the handle removed, we recommend securely tightening the bonnet nut with a wrench. Please reach out for further assistance or with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31

What is the item number for the lock nut used to secure the faucet to the countertop? If no item number is available, could you specify the internal diameter and the thread type of the lock nut?

Asked by: bob27
Hi bob27, Thank you for your question regarding our Delta Faucet 1920-DST. The Bonnet nut is RP101240. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-02-09

Is this faucet 100% lead free?

Asked by: Healthymom
Hi Healthymom, Thanks so much for contacting Delta Faucet Company about 1920-DST! By January 4, 2014, any product that a customer who purchases, stocks, sells, and installs are lead-free per S.3874 and in compliance with the requirements of the law. Our Delta Faucet residential models are denoted with either an LF or DST suffix (e.g., 3551LF or 551-DST), Also you can see a checkmark on the packaging label. Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-07-17

We have this installed on a kitchen island. Are there any covers for the 2 holes on the back of the faucet stem and the back of the base?

Asked by: ssass24
Hi ssass24, Thank you for your question regarding our Delta Faucet 1920-AR-DST. Unfortunately, we do not have any hole covers available. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

How do you remove the button to get to the set screw on beverage faucet?

Asked by: leelee
Hi leelee, Thanks so much for contacting Delta Faucet Company! For the type of button that covers the edge of the set screw hole the handy paper clip can be used! Don't poke at the finish with the pointy end if it can be avoided. Use the rounded curved end to pry off the button. For the type of button that goes into the set screw hole, a stout toothpick or bamboo skewer can effectively work the button out. Look for the notch in the edge of the button as the focus of your prying. In either case, a small (1/8-3/16") screwdriver may be carefully deployed also. Please do not use a sharp knife. It may damage YOU as well as the faucet. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-04-13

What is the hole on the back labeled -CL- for?

Asked by: Lids
Hi Lids, Thank you for your question about the Delta Faucet model 1920-CZ-DST. This model is supplied with an air gap designed to accommodate most reverse osmosis drain systems. See the faucet manual for more information: https://media.deltafaucet.com/MandI/112898%20Rev%20B.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-01-31
  • y_2024, m_10, d_16, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_1920-DST, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 18ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.