Llave para cocina extensible de una manija con dispensador de jabón y tecnología ShieldSpray® en acero inoxidable negro
N.º de modelo: 19826Z-KSSD-DST
CARACTERÍSTICAS DEL PRODUCTO
La llave para cocina Greydon™ fue diseñada con una forma definida y de transición para adaptarse a cualquier entorno de cocina. El acoplamiento MagnaTite® de Delta® cuenta con un potente imán integrado que permite colocar el rociador extensible en su lugar y lo sostiene allí para que permanezca acoplado cuando no está en uso. La tecnología ShieldSpray® limpia con precisión láser al tiempo que contiene la suciedad y las salpicaduras. Un chorro concentrado quita con potencia los restos difíciles de comida y, a la vez, un innovador escudo de agua contiene las salpicaduras y elimina el desorden. De esta manera, usted pasará menos tiempo remojando, fregando y cambiándose de camisa. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las llaves para cocina de Delta están respaldadas por nuestra garantía limitada de por vida.
- El acoplamiento MagnaTite® utiliza un potente imán integrado para colocar la varilla rociadora de la llave de manera precisa en su lugar y mantenerla allí para que permanezca acoplada cuando no está en uso, y no se cae con el tiempo
- La tecnología ShieldSpray® limpia el desorden sin ensuciar
- El chorro concentrado evita el desorden y el escudo de agua innovador reduce las salpicaduras
- Los suaves orificios rociadores de goma Touch-Clean® le permiten limpiar fácilmente la acumulación de calcio y cal con solo deslizar el dedo
- La tecnología de sellado Diamond Seal® facilita la instalación y permite que su llave funcione como si fuera nueva toda la vida, ya que reduce los puntos de fuga y dura dos veces más que los productos estándar de la industria.
- Todo lo que necesita en una conveniente caja, que incluye líneas de suministro PEX InnoFlex®
- Se adapta a instalaciones con 1, 2, 3 o 4 orificios con placa de encimera de 10" opcional incluida.
- Cumplimiento con la ADA
- 3/8" de diámetro exterior, líneas de suministro de PEX rectas y escalonadas
- Incluye dispensador de jabón con acabado a juego con depósito de 8 oz
- El depósito del dispensador de jabón se rellena desde arriba
- Respaldado por la garantía limitada de por vida de Delta Faucet
Technology and Special Features
Cumplimiento con la ADA
Cumplimiento con la ADA
Algunas personas y códigos locales requieren que los artefactos cumplan con la Ley para estadounidenses con discapacidades (Americans with Disabilities Act). Si es posible que reciba visitas de personas con capacidades especiales o si cree que sus futuros clientes podrían apreciar esta función, Delta ofrece diversos artefactos que cumplen con esta ley.
Libres de plomo
Libres de plomo
Cumplimiento con la legislación estatal y federal de agua potable.
Tecnología de sellado Diamond Seal®
Tecnología de sellado Diamond Seal®
La tecnología de sellado DIAMOND™ es parte del nuevo y revolucionario sistema de distribución de agua de Delta. La superficie de contacto interna, compuesta por pequeños diamantes, hace que la válvula sea muy duradera y no tenga fugas. También evita que el agua entre en contacto con posibles contaminantes metálicos.
ShieldSpray®
ShieldSpray®
La tecnología ShieldSpray® limpia con precisión láser y, al mismo tiempo, evita el desorden y las salpicaduras. Un chorro concentrado quita con potencia los restos difíciles de comida y, a la vez, un innovador escudo de agua rodea el chorro y el desorden para contener las salpicaduras, para que así pase menos tiempo remojando, fregando y cambiándose de camisa.
Acoplamiento MagnaTite®
Acoplamiento MagnaTite®
El cabezal de rociado deslizable utiliza un poderoso imán que mantiene la varilla fija en su lugar mientras no se usa. ¡Ya no queda colgando!
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación de 8" con 1, 2, 3 o 4 orificios.
Altura total:
16 1/2
Voltaje:
0
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
Disco cerámico
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
RESEÑAS
Rated 1 out of
5
by
Mistersawdust from
NOOO!
I have this kitchen fixture in my RV and the wand/nozzle continuously clogs and it cannot be disassembled to properly remove debris from the screen. And they thoughtfully offer a replacement wand/nozzle for $80. Go Kohler instead.
Date published: 2024-04-26
Rated 3 out of
5
by
Elite Home Services LLC from
Delta warranty support is poor. Buy Kohler
I’m a contractor installing roughly 400 kitchen faucets in the last few years. I offer customers choices between Kohler, Delta and Moen. Kohler is much better at warranty support than Delta. As a result we will not be recommending Delta faucets going forward.
Date published: 2024-04-01
Rated 5 out of
5
by
Jolly123idgl from
Good Features
Overall Good and affordable product
Date published: 2023-08-24
Rated 5 out of
5
by
Jolly123svxq from
Good Features
Overall Good and affordable product
Date published: 2023-08-21
Rated 4 out of
5
by
jfbillingsley from
Nice faucet, bad part fitment, awful instructions
Let me start by saying I'm not a contractor or plumber, so I don't know if these kind of instructions are "industry standard" because pros never look at them. I'm just a homeowner doing my own work.
I like this faucet. I'm a little worried about the long-term longevity of the plastic spray handle piece (it LOOKS like brushed metal but it's definitely plastic!), but so far it's nice.
Installing it was made way more complicated than it needed to be because of two major issues: a bracket that *didn't fit from the factory and had to be modified*, and some of the worst instructions I've ever experienced.
The black plastic bracket which holds the faucet to the sink has a hole to allow the threaded tube from the hub to pass through it... except it's way too small for that tube to fit. I legitimately believed I had the wrong part because it fit so poorly (and because it doesn't look like what's in the diagram).
I had to open up the hole with a round file quite a bit before the tube fit through it. I am not the only one who has had to do this, as I can find videos of people explaining this on youtube. Cmon, guys, would it hurt to do a little QA testing? Like making sure the *most important bracket in the installation actually fits on the faucet* before packing it up?
Then the instructions. Oh man, the instructions.
- the instructions are generic for multiple models, and none of them look like what I bought.
- the instructions are multilingual, but instead of doing the normal thing where you have the three languages in three different sections, you just mashed all three languages into every page, which makes it unnecessarily difficult to read.
- there is no parts list, so I had no idea what parts I should and shouldn't have.
- there is no exploded view showing part numbers for ordering replacements.
- there is no mention of the hose weight.
- there is no mention of the soap dispenser (it's easy to install, but I didn't even realize you could fill it from the top, and now I feel like an idiot crawling under the sink to unscrew the bottle).
The absolute worst part is the illustration and description at the top-right of page 3, which is most of the installation instructions. In this one block of instructions, there are these problems:
- it refers to the same part as both the "baseplate" and the "under cover plate" in the same paragraph. make up your mind.
- it tells me to install gasket 3, but that was installed from the factory.
- it then *fails* to mention that I need to install the round foam gasket on the bottom of the hub. it's a good thing I watched a video! (and why was the other gasket installed from the factory, and not this one? the mind boggles.)
- the included bracket looks nothing like the illustration, so I thought I had the wrong part.
- there is no mention of how the metal clamping plate on the bracket is supposed to work, though I figured that out.
And then, the instructions never mention what to do in the case that you DON'T have a side sprayer/diverter. I figured out that you need to plug the extendible hose into the white thing coming out of the hub, and then clip the blue clip onto it, but none of this is explained in the instructions *at all.* If I hadn't done that, I guess it would have just sprayed water all over the inside of the cabinet when I turned it on! Oh and, the hoses coming out of the bottom of the hub look NOTHING like any of the diagrams.
It's a good thing I was able to puzzle out how things should go together, but I shouldn't have to do that. If you're so bottom-line-conscious that including a slightly larger paper manual would break your budget, just put it online and put a QR code on the paper manual. And hire some better manual writers. Maybe an ex-Ikea employee or something. Jesus.
Would I recommend this product to a friend? Yes, but I would put it in for them lol
Date published: 2023-07-09
Rated 5 out of
5
by
Mike from
Really nice facuet
Just installed the facuet. Perfect size for our small kitchen. Really easy to install.
Date published: 2023-02-13
Rated 5 out of
5
by
WY614 from
Great options
I bought this faucet two weeks ago and it was easy to install and I really like the removable head for cleaning.
Date published: 2022-11-20
Rated 5 out of
5
by
novy from
Greydon pull down kitchen faucet
We purchased the Greydon pull-down kitchen faucet. Easy to install. I Was waffling back and forth about the automatic sensor touch and this one. Glad I picked this one. What an amazing faucet. The pull out nozzle is soooo easy to use and just glides back in place. The water hose part is very moveable. The best part is when my hands are dirty I can just tap the faucet handle with the back of my hand and the water turns on easily. Another great feature is that you can move the handle to either the hot or cold position before you turn the water on. I love the high arch of the faucet. Gives the kitchen a very clean sleek look. I like the fact that the water comes out in a smaller stream because we live in California and this saves water. Absolutely love this faucet.
Date published: 2022-04-28
Preguntas y respuestas
I just installed the faucet. Flushed it as in instructions. The water flow is very light. The flush seemed to come out fast enough.
Hi Don d,
Thanks so much for contacting Delta Faucet Company!
The GREYDON® Pull-Down Kitchen Faucet MODEL#: 19826Z-SPSD-DST has a maximum flow rate of 1.8 GPM @ 60 psi. Please refer to the technical specifications sheet for more details. I have attached the link below.
https://media.deltafaucet.com/SpecSheet/DSP-K-19826Z-SD-DST%20Rev%20A.pdf
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-19
What other pull down kitchen faucets have the spray as shown in the picture formthis faucet. A spray that is full circle and not broken up
Hi Jack,
Thank you for your question about the Delta Faucet model 19826Z-SD-DST Greydon™ Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSpray Technology In Chrome. I am sorry this information was not readily available, and I am happy to help!
Delta Faucet models that include ShieldSpray technology would have three settings. The spray setting is in a split pattern, in addition to the aerated stream and the innovative ShieldSpray setting. A faucet model without ShieldSpray would be recommended for a faucet without the split pattern.
Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
I love this - installed with deck on overmount sink 8 months ago but we are remodeling now with undermount sink and want to use single hole, but we do not have the single hole install kit components. Can we get those separately? Please advise. Thanks!
Hi AndieD,
Thanks for your question regarding 19826Z-SPSD-DST! Yes, RP47274SP is available for purchase. Please feel free to contact us with any questions or for further assistance.
https://www.deltafaucet.com/parts/product/RP47274SP.html
https://www.deltafaucet.com/where-to-buy
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Can the Greydon Model 19826Z-SPSD-DST be mounted directly on the sink?
Hi Anna,
Thank you for contacting Delta Faucet Company! Please accept our sincere apology for the inconvenience you are experiencing. Here is what we can do to resolve your issue for you.
Our Delta Faucet Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSpray Technology In Chrome MODEL#: 19826Z-SD-DST can be mounted directly to the sink, please see page 3 in the maintenance and installation link below.
https://media.deltafaucet.com/MandI/106557%20Rev%20C.pdf
Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Just purchased the Greydon faucet model19826Z-spsd-dst, need the 10-1/2’” escutcheon
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company about 19826Z-SPSD-DST! The faucet includes the RP47274PCPR 10" escutcheon plate, and we do not manufacture a larger size. I am sorry for any inconvenience you may be experiencing.
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2024-02-21
When will you/Home Depot have inventory..
Hello Nancy,
Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST GREYDON™ Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSprayTechnology. I apologize for any difficulty finding this information. We are happy to help!
This faucet model is currently available to order. If a dealer does not carry a specific item in stock, they should still be able to place an order for you.
Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer.
Best regards,
Bryan
Date published: 2024-03-28
Is their an insinkerator hot water dispenser that matches the delta greydon spotshield stainless?
Hi G711,
Thanks so much for contacting Delta Faucet Company!
The GREYDON® Pull-Down Kitchen Faucet With Soap Dispenser MODEL#: 19826Z-SPSD-DST matches closest to our Contemporary Square Instant Hot Water Dispenser MODEL#: 1940LF-H and the Traditional Instant Hot Water Dispenser MODEL#: 1960LF-H.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-01-31
What is the good rate for the Greydon faucet?
Hello Susie,
Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you!
Our Delta Faucet Greydon™ Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSprayTechnology In Spotshield Stainless MODEL#: 19826Z-SPSD-DST has a maximum flow rate of 1.2 GPM @ 60 PSI, please see the link below to the technical specification sheet.
https://media.deltafaucet.com/SpecSheet/DSP-K-19826Z-SD-DST%20Rev%20A.pdf
Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Is the LED supposed to stay on after turning the faucet off? It does so on my newly installed 19826Tz-SPSD-DST. The light goes out when I tap the faucet.
Hi Julia,
Thank you for your question regarding our Delta Faucet 19826Z-SPSD-DST. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
An LED light changes color to identify when the water has reached the desired temperature.
LED Temperature Color Ranges:
BLUE for temperatures below 80oF (26.7oC)
MAGENTA as the temperature rises from 80oF (26.7oC) to approximately 110oF (43.3oC)
RED when the water temperature is greater than 110oF (43.3oC)
Thank you for being a loyal Delta Faucet customer.
Best Regards,
Themar
Digital Communications Specialist
(800) 345-3358
customerservice@deltafaucet.com
Date published: 2024-01-31
Is the hose self retractable? Or do I have to manually push it back in the docking system?
Hi Valued Customer,
Thank you for your question regarding our Delta Faucet 19826Z-SPSD-DST.
The purpose of the weight is to help the hose retract back into the faucet after pulled out.
Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-03-20
My box came with the wrong instructions inside. Do you have instructions on line?
Hi patricia,
Thanks so much for contacting Brizo Faucet Company!
I apologize that your faucet was missing instructions and am happy to help. Please see the following link for the instruction manual.
https://media.deltafaucet.com/MandI/106557%20Rev%20D.pdf
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2023-02-14
Can i buy a replacement faucet wand/ head part?
Hello Bryce,
Thank you for your question! We apologize that this information was not readily available and will be happy to help you.
The Delta Faucet Greydon™ Single Handle Pull-Down Kitchen Faucet With Soap Dispenser And ShieldSprayTechnology In Spotshield Stainless MODEL#: 19826Z-SPSD-DST uses the RP100546 wand assembly, hose, and clips.
You can purchase parts online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
To order parts over the phone, please call us at 1-800-345-3358, Monday through Friday from 8 am to 8 pm and Saturday from 9 am to 6 pm Eastern Standard Time. We accept Visa or MasterCard.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
I attempting to connect an AC adapter. Any instructions on this process? I kept the batteries connected. When I connect the AC adapter, the red led turns on but the touch does not work. I remove the AC adapter and back to normal. Thoughts??
Hello Teddy,
Thank you for reaching out to Delta Faucet Company!
Our 19826Z-SPSD-DST is not a touch faucet and cannot be converted into a touch faucet. We have reached out to you directly to further assist you with this matter!
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Engagement Specialist
Date published: 2024-01-31
I would like to know if the soap dispenser will fit a 3-hole "type" installation. Will the height of the soap dispenser clear the faucet's handle when the faucet is on?
Hi bb88,
Thanks so much for contacting Delta Faucet Company!
If you are installing the long escutcheon then the soap dispenser will go in the fourth hole on the sink. The soap dispenser should not be installed so close to the handle and this is typically not an issue.
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
1. How do I tell which units use PEX tubing? 2. How do I tell which units have PVD finish? Thanks!
Hi Mike,
Thanks so much for contacting Delta Faucet Company!
PEX tubing will be long dark grey thin lines that extend all the way from the bottom of the faucet to the home's shut-off valves under the sink. PVF finishes are exclusive to five finishes we offer. Please see the following link for more information.
https://www.deltafaucet.com/design-innovation/innovations/kitchen/brilliance-finishes
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
My faucet is one year old and recently developed a drip. Is it correct that I should replace the valve cartridge or is there something else that would cause this drip? What part number fits this faucet if so?
Hi Melissa,
Thanks so much for contacting Delta Faucet Company!
It is possible that a flush could resolve the dripping from your GREYDON™ Single Handle Pull-Down Kitchen Faucet With ShieldSpray Technology MODEL#: 19826Z-BLSD-DST. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, you can replace the TRINSIC®
DIAMOND™ Valve MODEL#: RP73000. Parts can be purchased online or locally. Please see our Where to Buy page for help finding dealers in your area or online.
https://www.deltafaucet.com/where-to-buy
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
How can we get a cartridge under the lifetime parts warranty. Faucet is leaking from handle and is less than a year old.
Hi EliteHandyman911,
Thanks so much for contacting Delta Faucet Company about, 19826Z-SPSD-DST!
Our warranty is, All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed. I have included a link below for the warranty information.
https://www.deltafaucet.com/warranty
Please contact us directly if you have any questions or need additional assistance.
Best Regards,
Nicole
Digital Communications Specialist
Date published: 2023-03-31
It shows black stainless as an option. But says not an option on the HD site. Do u know if it will be again?
Hi Theresa,
Thank you for your question!
Yes, this Delta Faucet model is currently available in matte black as 19826Z-BLSD-DST.
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
I recently ordered this set in Champagne Gold from Home Depot. It was delivered today and the soap dispenser is not the same color as the faucet and does not look gold. Is this normal?? Has anyone else had this problem?
Hello,
Please accept our sincere apology for the inconvenience you are experiencing. We have reached out to you via email to further assist at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-07-19
Is there a higher flow aerator and/or one with laminar flow, that can be swapped out of our Greydon kitchen faucet? We do a lot of pot filling and a higher rate of flow would be so much nicer. Thank you!
Hi Aaron,
Thanks so much for contacting Delta Faucet Company!
The GREYDON™ Pull-Down Kitchen Faucet MODEL#: 19826Z-SPSD-DST has a maximum 1.8 flow rate of GPM @ 60 psi. It is possible that a flush could resolve the. To flush the supply line, first shut off the hot and cold-water supply. Remove the hot supply line from the shut-off valve and place the line into a bucket. Open the handle to the fully open middle position, and then turn the cold supply back on for one minute. The cold water should flow through the faucet and out the hot supply tube. Reconnect the supply line and repeat with the second line. If this does not help, please let us know.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2023-08-08
I just installed a new Greydon Single-Handle Pull-Down Sprayer Kitchen Faucet, flushing it before first use. After one day it now barely flows and is unusable. I took of the sprayer and see no blockage. Help
Hi Mark,
Thank you for contacting us, I would be happy to help you.
To flush the unit, we recommend the following:
Start with the easy stuff:
Remove your aerator, wand or hose to check the flow through the unit without that part installed.
If the flow is good, the piece you’ve removed is where the issue is.
Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow.
If the water does not have a good flow, the problem could be in the faucet.
Next, check the supply lines for debris:
Turn the supply off to both the hot and cold-water lines.
Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water.
Next, disconnect the hot water supply line and place it inside a bucket.
Once the line is securely positioned into the bucket, turn on the cold-water supply.
Please contact us back if you have any questions or need further assistance. Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Date published: 2024-07-08
Good morning, we installed the tap but it appears to have no pressure, we are already using a mixer and we have already cleaned the filter, the inlet pressure is very strong. Should I do something else?
Hello Valued Customer,
Thanks so much for contacting Delta Faucet Company!
The Greydon® Pull-Down Kitchen Faucet with Soap Dispenser and ShieldSpray® Technology Model#: 19826Z-SPSD-DST has a maximum flow rate of 1.8 GPM @ 60 psi.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-10-27
Can it be installed with the lever on the left side?
Hi MikeS,
Thank you for contacting Delta Faucet Company!
Yes, however, if the hot and cold lines are opposite, the temperature you get once you open the handle may be hot. Please be aware to prevent scalding.
We appreciate your inquiry. Please reach out directly if you have further questions!
Best Regards,
Kyra
Digital Communications Specialist
Date published: 2024-10-30
Granite countertops…What should hole size/diameter be for 1. faucet and 2. soap dispenser? Greydon MODEL#: 19826Z-SPSD-DST
Hi valued customer,
Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST.
The hole sizes should be between 1 5/16" and 1 1/2". See the technical specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-K-19826Z-SD-DST%20Rev%20A.pdf
Please reach out with any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-30
Our Touch20 worked great when first installed in June, but lately, it’s been stopping without being touched, and then it’s difficult to get it to turn back on. It’s getting progressively worse. I sometimes have to tap it 50+ times to get it to turn on.
Hi Renee,
Thanks so much for contacting Delta Faucet Company!
I'm sorry to hear that your Delta Touch2O faucet is not working correctly! I would be happy to help you. This can most likely be resolved by adjusting the installation below the sink. Please make sure that no wires are touching metal objects or other wires. Next, unplug the black LED wire and push it back in firmly until it clicks. Please reset the solenoid by removing the cap from the battery box for one minute and reconnecting it. Be sure to use a new set of brand-name, non-rechargeable batteries and install them as indicated on the box. Please also ensure that the battery box is placed on the floor of the cabinet, 2 inches from the sides or metal objects.
It is possible that a flush could resolve this issue. To flush the solenoid, keep the handle in the off position. Remove the clip that is attached to the braided hose on the bottom of the solenoid.
After the hose is removed, place a bucket under the solenoid, and then open the handle. It's helpful to have someone control the handle while the other person is in the cabinet with the bucket.
We would also advise flushing the hot and cold lines.
1. Please be sure to turn the water supply off before beginning this process.
2. Move the handle to the full mixed position.
3. Disconnect the faucet supply line from the hot side.
4. Position a bucket with the supply line connection inside the bucket.
5. Turn on the supply stop on the connected supply line side slowly, directing the water from the disconnected side into the bucket.
6. Reconnect the supply line.
*Please use caution when flushing the hot water.*
You'll want to repeat steps 1-6 for the cold side. Once you've done the flushing, you can turn the water supply back on to the faucet.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-01-31
We have a 27 inch workstation sink by z line, looks like a similar drain spot to your 27 workstation. Is greydon a good fit for this size/ type sink?
Hi Theresa,
Thank you for your question about the Delta Faucet model 19826Z-SPSD-DST.
Yes, the faucet is a good size for a 27" sink the spout reach is 9 3/8".
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
How do I register my faucet? The installer threw away the box and all the papers. Thank you
Hi Sueellen39,
Thanks so much for contacting Delta Faucet Company!
The Product Registration link can be found below.
https://www.deltafaucet.com/service-parts/product-registration
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.