Llave para cocina extensible de una manija en cromado

Hello, Thank you for your question! Our faucets are made of several materials and differs on the model. They can contain bronze, brass, zinc, stainless steel, copper and plastics. This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the issues you are experiencing and we are happy to help! We have reached out to you directly to further assist you with this matter. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi notaplumber, Thank you for your question about the Delta Faucet model 19867LF. See a how to video for replacing the magnet retainer here: https://support.deltafaucet.com/s/article/RP80977-magnet-replacement-kit Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hello, Thank you for contacting us, I would be happy to help you. I recommend flushing the unit, we recommend the following: Start with the easy stuff: Remove your aerator, wand or hose to check the flow through the unit without that part installed. If the flow is good, the piece you’ve removed is where the issue is. Soaking the part in a 50/50 mixture of white vinegar and water could help remove any particles or debris blocking the flow. If the water does not have a good flow, the problem could be in the faucet. Next, check the supply lines for debris: Turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Please contact us back if you have any questions or need further assistance. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi Extras, Thank you for your question! There is not a soap dispenser exclusive to the Nicoli collection. Please see the following link for our current lineup of soap dispensers. https://www.deltafaucet.com/kitchen/accessories/soap-dispensers?page=2 Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello Valued Customer, Thank you for contacting Delta Faucet Company! We apologize for the inconvenience you are experiencing and we are happy to help! When water heaters are replaced or when the water is shut off debris can flow through quickly when water is turned back on. With the issue that you are experiencing, the faucet will need to be flushed. Please refer to the information below to flush your faucet. *Please gather one 5 GAL bucket and some towels for excess water. 1. Please shut off both hot AND cold water supplies. 2. Remove the COLD water line and point the line into the bucket. 3. Turn the HOT water on and allow the water to flow into the bucket for about a minute. 4. Turn the HOT water back off and install the cold water line correctly. 5. Remove the HOT water line and point the line into the bucket. 6. Turn the COLD water on and allow the water to flow into the bucket for about a minute. 7. Turn the COLD water back off and install the hot water line correctly. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist

Hi Valued Customer, Thank you for your question regarding our Delta Faucet. Unfortunately, we do not offer a taller Nicoli faucet. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello Valued Customer, Thank you for contacting Delta Faucet Company! No, our pull-down and pull-out kitchen faucet spray modes do not change if you turn the unit off and on again. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Communications Specialist