Llave para cocina de dos manijas en bronce frotado con aceite

Hi, Joseph! Thank you for your question. The Delta 21996LF-OB faucet measures 11 5/8"(295 mm) in height. Here is a link to further measurements for the faucet: https://media.deltafaucet.com/SpecSheet/dsp-k-21996lf_D.pdf Best Regards, Rosanna

Hello, Thank you for your question! This will depend on the supplier code located on the back of the faucet just below the spout. See the following parta diagram link as this will tell you what spray cap/plug is utilized. https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF%20Rev%20D.pdf Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Lisa, Thank you for your question. Unfortunately, it is not designed to be installed without the base plate. The 2480-RB-DST and 2256-RB-DST are widespread two-handle kitchen faucets, which are available in Venetian Bronze. http://www.deltafaucet.com/search/results.html?q=2480-RB-DST%2C+2256-RB-DST&num=20 Thanks, Jon

Thank you for your question, K4551! The Delta Foundations Kitchen 21987LF faucet would be the closest matching model without a side sprayer. You may cap off the hose connection under the faucet if you do not wish to use the sprayer. Depending on the code on the back of the faucet, you will either need a 1/2" threaded cap (413763) or the RP60295 (413763-A), https://media.deltafaucet.com/MandI/86376%20Rev%20A.pdf Best regards, Tanya

I replaced a brushed satin with this one and it looks great. I have black garnet counter top.

Either a Brita or Pur cartridge filter will work.

Hi, MSA345! Thank you for you question. The base plate for the Delta 21996LF Faucet is non-removable. The handles and spout assembly cannot be removed to use separately. We do apologize for any inconvenience this may cause. Best Regards, Rosanna

Hi, Wayne. Thank you for your question. The bottom bushing gets installed onto the diverter assembly inside of the valve body. The top bushing is to be installed on the spout shank at the top above where the two o-rings are located. Best Regards, Rosanna

Dear Zdzichu, Thank you for your inquiry! The Delta Windemere Kitchen 21996LF-SS faucet has a thread size of 3/4-27. Unfortunately, we do not manufacture any adapters to fit garden hoses for that size aerator. You may want to check with a local plumbing store or dealer for more information. Best regards, Tanya

Hi Baker, Thank you for your question. The Delta Windemere Kitchen 21996LF faucet has an aerator with a thread size of 3/4-27, we do not manufacture any adapters to fit dishwashers or filters. You may want to check with a local plumbing store or the makers of the dishwasher for adapters. Best regards, Tanya

Thank you for your question, Dave! The aerator will unscrew from the spout. It has a thread size of 3/4"-27. Best regards, Jon

Probably not. Aerator is much smaller than sandard size.

Thank you for your question, Michael!. The Delta Windemere Kitchen faucet, model 21996LF, has an aerator with a thread size of 3/4-27. Unfortunately we do not manufacture any adapters to fit this size. You may want to check with a local plumbing store or the manufacturer of the dishwasher for adapters. Best regards, Edward

Hi, Carrie! Thank you for your question. There are two versions for this faucet that have two different sprayer caps. If the supplier code in the back of the faucet escutcheon assembly has no 'A' after the 6 digit code, and you have a round connection for your valve end/hose assembly, you will want RP40301 cap. If the supplier code in the back of the faucet escutcheon plate assembly does have an 'A' after the 6 digit code, and the connection for the valve end/hose assembly is square, you will need RP60295. You can usually find Delta faucet parts at any dealer that sells Delta faucets. Some good places to check can be found on our website under Where To Buy. http://www.deltafaucet.com/where-to-buy/index.html To order parts directly from Delta, you may call the toll-free Delta Help Line at 1-800-345-3358. We accept Visa or MasterCard for parts orders over the telephone. Best Regards, Rosanna

Hi, Coso! Thank you for your question. The 21996LF-SS body is made of metal material. Best Regards, Rosanna

Hi, Allie! Thank you for your question. The RP41680 handles can fit on the 21996LF faucet. Best Regards, Rosanna

Hello Barry, Thank you for your inquiry! The sprayer port can be capped. Please refer to the parts diagram below and check to see which code your faucet has on the back of the base. It will be either 413763 or 413763-A. Models with the :-A" can use part number RP60295 to cap off the sprayer outlet. If your faucet has the 413763 code, you can use a threaded cap that works with 1/4"-18 NPSM. Such a cap can be purchased locally at a plumbing or hardware store, or online. Best regards, Tanya

Hi, Randy. Thank you for your question, and we are sorry for any confusion on your Delta 21996LF faucet. The replacement repair kit is determined by the supplier code. The supplier code is located at the back of the escutcheon plate. It is a 6 digit code with either an 'A' or no 'A' after the 6 digits. If the code has an 'A' after it, you will need repair kit number RP54801. If the code does not have an 'A' after it, you will need repair kit number RP41701. Here is a link to the parts diagram to show where the supplier code is located: https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF.pdf Best Regards, Rosanna

Thank you for your question, Joyce! I'm sorry to hear you are not getting the full pressure on your side sprayer and we would be happy to help. You may need to check for debris in the diverter if this model was not fully flushed during installation. Below is a video which will show this procedure on a similar model. If you need further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com. https://www.deltafaucet.com/video-gallery/video-page-1?videoId=eWw-FdAezZY Best regards, Edward

No. Non standard size for aerator.

Thank you for your question, Derek71! The Delta Windemere Kitchen 21996LF-SS faucet has an aerator with a thread size of 3/4-27, we do not manufacture any adapters to fit dishwashers or filters. You may want to check with a local plumbing store or the makers of the PUR filter for any other adapters. Best regards, Tanya

Hi, Mike! Thank you for your question. The Delta 21996LF-SS Faucet aerator assembly is part number RP61342SS. Here is a link to the part: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP61342SS Best Regards, Rosanna

Hi, Grace! Thank you for your question. The Delta 21996LF faucet aerator has a thread size of 3/4"-27. We do not make a compatible adapter at this time. We recommend to check with the swivel sprayer manufacturer for the correct adapter. Best Regards, Rosanna

Hi, TimR! Thank you for your question. The Delta 21996LF-SS Faucet diverter assembly is part number RP41702. Best Regards, Rosanna

Hello, Thank you for your question! Our faucets are made of several materials and differs on the model. They can contain bronze, brass, zinc, stainless steel, copper and plastics. This model may contain, bronze, brass (36000, 260) (hub, handle, body, tube, fittings, zinc (escutcheon, hub, handle), stainless Steel (undercover plate, seat liner, set screw), copper (tubing), aluminum, PEX-C (puck and tubing), silicone (gaskets), synthetic rubber - EDPM, santoprene (hoses), vinyl (hoses), nylon, plastics, and ceramics. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi, Greg426! Thank you for your question. The Delta 21996LF Faucet Sprayer Assembly can be removed and the faucet can be installed without the sprayer assembly. The faucet will need a spray cap. For the round style quick connect use RP40301. For the square style quick connect use RP60295. Best Regards, Rosanna

Hi bill, Thanks for your question regarding 21996LF-OB! Flushing may resolve your concern; please see the flushing instructions below. https://support.deltafaucet.com/s/article/What-do-I-do-if-my-single-handle-kitchen-faucet-drips-from-the-aerator-1628028364637 Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hi Brandon, Please accept our sincere apology for the inconvenience you are experiencing. We are happy to help! A replacement sprayer is RP54807OB if the hose uses a quickconnect to connect to the faucet, or RP44125OB if the hose is connected to the faucet with a threaded nut. See the parts diagram for more information: https://media.deltafaucet.com/PartsDiagram/DPD-K-21996LF.pdf Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Valued Customer, Thank you for your question, please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hi caryn, Thanks so much for contacting Delta Faucet Company about, 21996LF-OB! I have included a link below to the Help Center which will provide flushing instructions, if the leak persists we would recommend replacing the cartridge. https://support.deltafaucet.com/s/article/Why-does-my-faucet-have-low-water-pressure-1628028366405 Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist