Two Handle Wall Mounted Kitchen Faucet in Stainless

Hi, Rich! Thank you for your question. The Delta 22722LF-SS faucet uses aerator RP93527 which has a 3/4"-27 thread size. We do not have a swivel aerator that will fit but we do recommend to check with your local hardware or plumbing supply store to find an aerator that will fit this aerator size. Best Regards, Rosanna

Thank you Rosanna.  I located the faucet in another state before I received your answer and had a friend send me two (in case there was a problem with the first and the faucet was no longer available).  I look forward to seeing and installing them.

Dear Jean, Thank you for your questions. The Delta Two Handle Wall-Mount 22722LF-SS faucet is scheduled to start shipping out 11/10/2017. This unit will be offered in the Brilliance Stainless Steel finish only. This faucet comes with the Limted Lifetime warranty on parts and finishes to the original owner of the faucet. I have included the Maintenance/Installation Document link, with the warranty and parts information. https://media.deltafaucet.com/MandI/93487%20Rev%20A.pdf Best regards, Tanya

Hi, Darling! Thank you for your question. The Delta 22722LF-SS faucet uses aerator RP93527 which has a 3/4"-27 thread size. We do not have a swivel aerator that will fit but we do recommend to check with your local hardware or plumbing supply store to find an aerator that will fit this aerator size. Best Regards, Rosanna

Thank you for your question, tadf! The spout has a male thread size of 3/4"-27. Best regards, Jon

Hi Lisa, Thank you for your question! No, this does not require the purchase of an additional rough-in valve. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi James, Thanks so much for contacting Delta Faucet Company about 22722LF-SS! I have included the measurements to RP93527 below. 14.2 mm top to bottom 20.9 mm diam at lip 20.0 mm diam at main body Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist

Hello Lance, Thank you for your question! I am happy to help you! Our Delta 22722LF-SS has setas and springs and stem, These parts turn the water on and off. This unit would carry our lifetime limited warranty. Please contact us back for any further questions. Best Regards, Nicole

Hello Mich, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 22722LF-SS is not listed as a WaterSense model and receives 1.8 GPM. Please contact us back directly with any further questions. Best Regards, Skyler

Hi Susan, Thank you for contacting Delta Faucet. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. Our Delta Faucet Delta Two Handle Wall Mounted Kitchen Faucet In Stainless MODEL#: 22722LF-SS spout rotates 360˚. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist

Hello Natalie! Thank you for your question and we are happy to help. The Delta 22722LF-SS will need the R3500-WL rough. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hi Susie, Thanks so much for contacting Delta Faucet Company! Unfortunately, we do not offer a swivel aerator for this model. We apologize for any inconvenience this may have caused. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hello GGEE, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! The black bushing from our Delta Faucet DELTA Two Handle Wall Mounted Kitchen Faucet MODEL#: 22722LF-SS part RP41700 goes at the bottom of the spout under the spout hub. Please follow the steps below: Turn the water off to the faucet, both hot and cold. Next, the spout will need to be unthreaded from the body, the bushings and Orings will be visual at that time. Please see how they are placed and use a rag with 50/50 white vinegar and water to wipe to the location of the oring and bushing before installing the new ones. Refer to the link below that shows the location of the parts during install. https://media.deltafaucet.com/PartsDiagram/DPD-K-22722LF_A.pdf Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole

Hi Joea, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! I have included a link below to our Delta Faucet Two Handle Wall Mounted Kitchen Faucet In Stainless MODEL#: 22722LF-SS parts diagram to show the replacement parts needed for your model, please see the link below. https://media.deltafaucet.com/PartsDiagram/DPD-K-22722LF_A.pdf Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hello Dave, Thank you for your question! I am happy to help you! Our Delta 22722LF-SS faucet uses aerator RP93527 which has a 3/4"-27 thread size, the rp3927 is discontinued and does not have a thread size available. Please contact us back for any further questions. Best Regards, Nicole

Hi Grant, Thank you for your question about the Delta Faucet model 22722LF-SS. As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific faucet model was made. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi 6248 S, Thank you for your question about the Delta Faucet model 22722LF-SS. The distance from the wall to the spout outlet is about 11.33" Please contact us directly if you have any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi Bobby, Thanks so much for contacting Delta Faucet Company! The CORIN™ Wall Mounted Kitchen Faucet MODEL#: 22722LF-SS is not adjustable. The faucet is 12 13/16" in length. Please refer to the technical specifications sheet for more details, I have attached the link below. https://media.deltafaucet.com/SpecSheet/DSP-K-22722LF_A.pdf Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Hi Steven, Thanks so much for contacting Delta Faucet Company! Yes, the RP93525 stem unit is the same for both hot and cold sides. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

Hi Donna, Thanks for your question regarding 22722LF-SS! Items are discontinued from time to time due to a number of things. Items may no longer meet certain certifications or the style is no longer in demand. Unfortunately, this faucet is being discontinued as of July 30th, 2022. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist

Hello Ron K, Thank you for your question! We apologize that the information you are searching for was not readily available and I am happy to assist you! We thank you for being a loyal Delta Faucet customer. The Delta Faucet model 22722LF-SS Two Handle Wall Mounted Kitchen Faucet has an aerator with a 3/4"-27 thread size. We recommend using a swivel aerator with that thread size or using an adapter to fit it instead. Please contact us back directly via email with any further questions. Best Regards, Skyler

Hello Joni, Thank you for contacting us, I am happy to help you. Delta does not have any wall mounted pulldowns or touch models, I have attached a link to show our pulldown touch kitchen faucets. https://www.deltafaucet.com/kitchen/faucets/touch-activated Please contact us back for any further questions. Best Regards, Nicole

Hello B Bajema, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Two Handle Wall Mounted Kitchen Faucets In Stainless MODEL#: 22722LF-SS aerator has a thread size of 3/4"-27, and unfortunately, We do not have a swivel aerator that will fit, but we do recommend checking with your local hardware or plumbing supply store to find an aerator that will fit this aerator size. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you. Please contact us back with any further questions. Best Regards, Nicole

Hi Buddy, Thank you for your question about the Delta Faucet model 22722LF-SS. I am sorry this information was not readily available, and I am happy to help! The faucet may use brass components. All Delta Faucet products meet or beat all state and federal lead requirements. Our faucets with Diamond Seal Technology (DST) feature designs where the water does not contact metal. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist

Hi Pete Z, Thank you for your question about the Delta Faucet model 22722LF-SS. Yes, the connectors can be rotated to adjust for holes from 7" to 9" center to center. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist

Hi el dum o, Thank you for your question about the Delta Faucet model 22722LF-SS. The replacement handle is part number RP93526SS. Unfortunately, this is discontinued as an individual part and we no longer carry this replacement handle. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist