Delta®

Brida y filtro para lavabo de cocina en cromado

N.º de modelo: 72010
Delta®
Brida y filtro para lavabo de cocina en cromado
N.º de modelo: 72010
Precio de lista: $9040
CARACTERÍSTICAS DEL PRODUCTO
  • Para aplicaciones de fregaderos de cocina
  • Reborde de bronce de 4-1/2" de diámetro
  • El reborde de montaje superior facilita la instalación
  • El filtro y canasto de bronce garantizan la calidad y la confiabilidad
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Altura total:
1 7/8
Voltaje:
0
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

RESEÑAS
Rated 1 out of 5 by from Junk; didn't last two years Basket strainer blew out and now the flange/tail-piece has blown out. So expensive, but such poor quality.
Date published: 2024-10-02
Rated 5 out of 5 by from Good basket strainer flange I have champagne bronze in my kitchen, now I have it in my sink.
Date published: 2024-09-27
Rated 1 out of 5 by from Junk from Delta. This flange is a piece of garbage, half of it is plastic that will crack over time. For the same price get the kohler that will last forever.
Date published: 2024-08-06
Rated 5 out of 5 by from Quality part Quality part for sink. Looks nice and works fine.
Date published: 2024-04-08
Rated 4 out of 5 by from Nice Matches the faucet finish and works well.
Date published: 2024-03-10
Rated 5 out of 5 by from Simple and good Good strainer as advertised.
Date published: 2024-02-13
Rated 1 out of 5 by from Bracket holding strainer to pipe broke within 5 months The piece that holds bolt keeping the strain connected to bottom piece broke at the seams.
Date published: 2024-01-27
Rated 5 out of 5 by from Perfect! Perfect basket strainer flange. I replaced our kitchen basket strainer flange that was made by another well-known plumbing manufacturer. That flange never worked from Day 1. The basket strainer seemed too small for the flange and never held the water. I had to buy a rubber stopper to fill the sink to wash dishes. When we replaced our kitchen faucet, I decided to replace the strainer flange at the same time. This one works flawlessly. It looks great and is easy to install.
Date published: 2023-11-03
  • y_2024, m_11, d_4, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_59
  • loc_en_US, sid_72010, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

Do you have a white sink strainer and basket? The first one I purchased (glacier Bay) cracked after installation (plastic). Now I am looking for one more durable. 

Asked by: Mickey
Thank you for your inquiry, Mickey! Unfortunately, we do not currently manufacture the Delta Kitchen Sink Flange and Strainer 72010 in a white finish. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

My farmsink has a 3 5/8” drain hole. Will this product fit? I’m not seeing dimensions listed here. 

Asked by: Lisa
Hello Lisa, Thank you for your question regarding the Delta Kitchen Sink Flange & Strainer and I am happy to help you today. The body for this model is 4 3/8" and the flange is 4 1/2". To view the dimensions for this model, please visit the link below: https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Please do not hesitate to give us a call on our warranty line at 800-345-3358 if we can assist you with anything going forward. Thank you, Brandy
Answered by: Brandy
Date published: 2024-03-28

I have your Kitchen sink flange & strainer 4 1/2" model #72010-C2 and need to get some replacement seals for them are they available

Asked by: Steveo
Hello Steveo, Thank you for your question regarding the Delta Kitchen Sink Flange & Strainer and I am happy to assist you today. Unfortunately, we do not have a replacement part number associated with the seals for this model and I apologize for any inconvenience this may cause. I see that you have been in contact with our customer service department regarding this issue and that we are working towards a resolution for this issue with you, although if there is absolutely anything going forward we may be able to help you with, please do not hesitate to give us a call at 800-345-3358 and we will do our best to assist you where we can. Have a wonderful day, Brandy
Answered by: Brandy
Date published: 2024-03-28

After reading these Q’s I see I ran into the same issue with the bolt length not fitting my fireclay sink. Has anyone had any luck on finding a longer bolt? Delta, why have you not provided customers with a solution or put this in the description???

Asked by: Dree
Thank you for your question, Dree! We are sorry to hear that this sink flange and strainer is not compatible with your fireclay sink and apologize for the inconvenience this has caused. Unfortunately we can not ensure that this part will fit a non-standard installation and do not make a longer bolt. We will, however, work to get this information more accessible for future use and we thank you for your feedback. https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

I purchased the sink strainer 72010 and the disposal flange 72030 in stainless steel. The disposal flange looks more like brushed nickel as it has a yellow/green tint. Is this normal or should they match exactly because they are the same finish?

Asked by: lasvegasdenny
Hello Lasvegasdenny, Thank you for your question. The Delta Kitchen Strainer and Flange 72010-SS and the Kitchen Disposal and Flange Stopper 72030-SS are manufactured with the PVD Stainless finish. Please know that we take extreme pride in the quality of our products and service. You will find that the use of PVD finishes is common throughout our industry and that finish variations are not unique to our products. The PVD process we use in the manufacturing of many of our finished products adds the color to our Brilliance faucets while also providing superior abrasion resistance. We attempt to minimize variations in color by utilizing certain control methods. However, differences in sizes, shapes and materials of individual faucet parts can produce variations in color that are sometimes noticeable to the human eye in certain lighting, despite the controls we have in place. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a way to purchase a longer bolt for this product? The bolt provided is about 1" too short for our farmhouse sink.

See bolt on specification sheet. Bolt M12 x 1.5-5g
Asked by: Kayla
Hello Kayla, Thank you for your question on the Delta Kitchen Sink Flange & Strainer. I am happy to help you today. Unfortunately, we do not carry a longer bolt for this strainer at this time and I apologize for any inconvenience this has caused. If there is anything further we can assist you with, please feel free to give us a call at 800-345-3358 and we will be happy to help you where we can. Thank you, Brandy Delta Faucet Company Customer Service
Answered by: Sarah
Date published: 2024-03-28

I need a Venetian Bronze strainer to match my faucet & other kitchen accessories. Will you be making that finish soon?

Asked by: Hil
Hi, Hil! Thank you for your question. At this time, we do not have the sink flange and strainer available in the Venetian Bronze finish. We are always updating our accessories and adding new finishes for our products. Please check back frequently with us! Best Regards, Rosanna
Answered by: Rosanna
Date published: 2019-09-10

What is the strainer mechanism to stop water flow?

Does the strainer have a spring clip - push to seal, pull to unseal? Or, does it have a post - twist and drop to seal, lift to unseal? Or, is it a more complex raise, gently lower while twisting until feeling it will drop then release to seal, raise then gently lower while twisting until feeling it will drop but not to the depth of seal then release? Or something even more imaginative?
Asked by: PickyAboutStrainers
My Delta 72010-AR strainer has what is considered a "ball lock strainer basket", simply push to seal, pull to unseal.
Answered by: DeltaDon
Date published: 2024-03-28
  • y_2024, m_11, d_4, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_61
  • loc_en_US, sid_72010, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 8ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.