Delta®

Tapón de brida y triturador para cocina en cromado

N.º de modelo: 72030
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Tapón de brida y triturador para cocina en cromado
N.º de modelo: 72030
Precio de lista: $10505
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
  • Reborde y tapón de desechos
  • Chapetón de bronce de 4 1/2" de diámetro
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Registrar su producto
Información de instalación
Overall Height (in.) :
1 3/4
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
RESEÑAS
Rated 1 out of 5 by from Stopper doesn't fit Trying to use stopper to put level of water in sink and the stopper is quite a bit too small. Cannot hold level in sink to thaw meat.
Date published: 2025-05-06
Rated 1 out of 5 by from Color coming off Just had my kitchen redone and have been using it about 3 weeks. Haven't even used the sink much because i havent been home. Went to look at the sink today and the champagne bronze is coming off and the silver is showing underneath. I haven't used any harsh chemicals, not even ajax! I hope it doesn't happen to the faucet because that was not cheap.
Date published: 2025-03-14
Rated 1 out of 5 by from Be transparent about compatibility Absurd that they don't provide compatibility information. Now I have to go through the hassle of returning. Lame. Does not fit my Waste King 3300. Finding out quickly Delta's documentation is 3rd grade level.
Date published: 2024-11-18
Rated 5 out of 5 by from Good garbage disposal flange I have champagne bronze in my kitchen, now I have the same color in my sink.
Date published: 2024-09-27
Rated 1 out of 5 by from zero stars Doesn’t hold water. I can’t believe you are selling this product under the Delta name, very poor quality .
Date published: 2024-09-25
Rated 3 out of 5 by from Delta quality is falling behind bought it to match the color of my kitchen faucet. Quality is meh
Date published: 2024-08-06
Rated 1 out of 5 by from Stopper too small Stopper is too small for the flange. Does not hold water in the sink. When I contacted customer service they told me I bought the wrong size. 100% incorrect. Flange fit in the sink but the stopper which comes with it is too small. It looks like this has been a problem unsolved for many years.
Date published: 2024-07-29
Rated 5 out of 5 by from Color match Perfect color to match my new faucet
Date published: 2024-05-23
  • y_2025, m_5, d_31, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_52
  • loc_en_US, sid_72030, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Does this model fit Insinkerator disposers?

Asked by: Todd@ R/T
Thank you for your question. Delta Faucet model # 72030-AR is 4 1/2" in diameter. You will need to check with the manufacturer of your diposal to see if that will fit.
Answered by: Delta1
Date published: 2024-03-28

Do you make disposal flange in Black Stainless?  I recently purchased one of your black stainless faucets and soap dispenser and would like a matching flange for the sink.

Asked by: Swartzx6
Hello Swartzx6, Thank you for your question. We do not manufacture the Delta Kitchen Disposal and Flange 72030 in a Black Stainless finish at this time. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

ON THE DISPOSAL FLANGE AND STOPPER # 72020 WHAT DISPOSERS DOES IT FIT ? I AM HOPING IT WILL FIT AN INSKERATOR PRO 750.

Asked by: TERRY
Thank you for your question, TERRY! Model 72030-KS will fit over a garbage disposal that has a 4 1/2" inch diameter. I have included a link to the Technical Specifications diagram for model 72030-KS, for you to refer to during the installation. https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Will this fit in a sink drain hole that measures 3-7/8" (98mm)? I also would like to know that about 72010-CZ.

Asked by: Eddi
Thank you for your question, Eddi! These will fit most sink drains and should fit a sink hole that is 3 7/8". Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best regards, Jon
Answered by: Delta Faucet
Date published: 2024-03-28

Will this work with a granite composite sink? Also, is the 4-1/2" diameter measured from the outer edge to outer edge or interior diameter?

Asked by: Curious
Hi Curious, Thank you for your question. The 4-1/2" diameter on the model 72030-AR is measured from the outer edge to outer edge. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Will this fit a sink hole that is 3-1/2 inches

Asked by: Andrea
Hello Andrea, Thank you for your inquiry! These will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Will this work with a badger 5 garbage disposal and the drain diamater 3 1/2 inch?  I purchased my faucet delta in attic steel and I’d like the falnage and stopper to match. 

Asked by: Andrea
Hi, Andrea! Thank you for your question. The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information: https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Hello, Do you guys offer the extended version of this finish basket? i am putting in disposals on fireclay sinks. if so do you have the part number?

Asked by: sergio
Hi Sergio, Thank you for your inquiry! The 72030-CZ Disposal Flange and Stopper is the only one we manufacture. Unfortunately, we do not offer an extended or longer flange/basket. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2025, m_5, d_31, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_48
  • loc_en_US, sid_72030, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 12ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.