Delta®
Tapón de brida y triturador para cocina en cromado
N.º de modelo: 72030
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
- Reborde y tapón de desechos
- Chapetón de bronce de 4 1/2" de diámetro
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Altura total:
1 3/4
Voltaje:
0
Tipo de válvula:
NA
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
RESEÑAS
Rated 5 out of
5
by
Suzrob from
Good garbage disposal flange
I have champagne bronze in my kitchen, now I have the same color in my sink.
Date published: 2024-09-27
Rated 1 out of
5
by
Tami from
zero stars
Doesn’t hold water.
I can’t believe you are selling this product under the Delta name, very poor quality .
Date published: 2024-09-25
Rated 3 out of
5
by
Jorge from
Delta quality is falling behind
bought it to match the color of my kitchen faucet. Quality is meh
Date published: 2024-08-06
Rated 1 out of
5
by
Jodee from
Stopper too small
Stopper is too small for the flange. Does not hold water in the sink. When I contacted customer service they told me I bought the wrong size. 100% incorrect. Flange fit in the sink but the stopper which comes with it is too small. It looks like this has been a problem unsolved for many years.
Date published: 2024-07-29
Rated 5 out of
5
by
Moore from
Color match
Perfect color to match my new faucet
Date published: 2024-05-23
Rated 1 out of
5
by
Joey from
Delta CZ Garbage Disposal Flange
Bought the CZ disposal flange to go with the Trinsic CZ kitchen faucet. When the plumber connected the disposal unit to the flange it then fell off. He tried a 2nd disposal flange, same model, and the disposal unit falls off. He said the rim at the bottom of the flange isn’t large enough to hold the disposal. Ended up using a different, stainless steel flange till we can figure out what’s going on.
Date published: 2024-05-12
Rated 1 out of
5
by
Skip from
Disposal collar
As in mention in other reviews, the stopper does not hold water. Returned product.
Date published: 2024-04-22
Rated 4 out of
5
by
Karmat from
Looks good.
The part looks nice but I thought it was the entire assembly that I needed to connect to my disposal. Luckily I had my old part and used the part of that that we needed.
Date published: 2024-04-07
Preguntas y respuestas
Does this model fit Insinkerator disposers?
Thank you for your question. Delta Faucet model # 72030-AR is 4 1/2" in diameter. You will need to check with the manufacturer of your diposal to see if that will fit.
Date published: 2024-03-28
Do you make disposal flange in Black Stainless? I recently purchased one of your black stainless faucets and soap dispenser and would like a matching flange for the sink.
Hello Swartzx6,
Thank you for your question. We do not manufacture the Delta Kitchen Disposal and Flange 72030 in a Black Stainless finish at this time.
Best regards,
Tanya
Date published: 2024-03-28
ON THE DISPOSAL FLANGE AND STOPPER # 72020 WHAT DISPOSERS DOES IT FIT ? I AM HOPING IT WILL FIT AN INSKERATOR PRO 750.
Thank you for your question, TERRY! Model 72030-KS will fit over a garbage disposal that has a 4 1/2" inch diameter. I have included a link to the Technical Specifications diagram for model 72030-KS, for you to refer to during the installation.
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Will this fit in a sink drain hole that measures 3-7/8" (98mm)? I also would like to know that about 72010-CZ.
Thank you for your question, Eddi! These will fit most sink drains and should fit a sink hole that is 3 7/8". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards, Jon
Date published: 2024-03-28
Will this work with a granite composite sink? Also, is the 4-1/2" diameter measured from the outer edge to outer edge or interior diameter?
Hi Curious, Thank you for your question. The 4-1/2" diameter on the model 72030-AR is measured from the outer edge to outer edge.
Thanks,
Dave
Date published: 2024-03-28
Will this fit a sink hole that is 3-1/2 inches
Hello Andrea,
Thank you for your inquiry! These will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best regards,
Tanya
Date published: 2024-03-28
Will this work with a badger 5 garbage disposal and the drain diamater 3 1/2 inch? I purchased my faucet delta in attic steel and I’d like the falnage and stopper to match.
Hi, Andrea!
Thank you for your question. The Delta 72030-AR Kitchen Disposal and Flange Stopper will fit most sink drains and should fit a sink hole that is 3 1/2". Please refer to the Technical Specifications for more information:
https://media.deltafaucet.com/SpecSheet/DSP-A-72030_A.pdf
https://media.deltafaucet.com/SpecSheet/DSP-A-72010%20Rev%20B.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
Hello, Do you guys offer the extended version of this finish basket? i am putting in disposals on fireclay sinks. if so do you have the part number?
Hi Sergio,
Thank you for your inquiry! The 72030-CZ Disposal Flange and Stopper is the only one we manufacture. Unfortunately, we do not offer an extended or longer flange/basket.
Best regards,
Tanya
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.