Lavabo de cocina tipo estación de trabajo con un receptáculo de acero inoxidable calibre 16 de 23" de montaje bajo encimera, con reborde WorkFlow™ y accesorios en acero inoxidable

Hi Tom, Thank you for your purchase of our kitchen sink! I am sorry to hear you were missing some included accessories for your sink. Do not worry however, we can assist you with that. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can get you the missing accessories you require.

Hi Shirley, Thank you for your interest in our kitchen sink! we can help you with that. The pricing is provided by the retailer you will purchase the sink through, you can view all the retailers and the pricing here - https://www.deltafaucet.com/where-to-buy?pid=95A931-33D-SS#wheretobuy-shoponline Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Thanks so much for reaching out to us. We are sorry to hear that you are experiencing these stains on your new sink. I assure you, they are not rust marks. Typically, when red spots appear on a Stainless Steel Sink like ours it is simply surface discoloration. This is usually taken care of permanently with a stainless steel polish and/or cleaner when used according to the directions of the cleaning product. Products such as Bar Keeper’s friend and a fine 3M Scotch Brite pad are both great options. Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions. Happy to assist.

Hey Ilikeitbut39, Any sink can be undermounted as long as it’s adequately supported (note that the supplied hardware will not work and you’ll have to provide your own) and the joint between the rim and the underside of the countertop has a continuous seal. Just be aware that in addition to voiding your warranty you’ll most likely be on your own with regard to customer support if you decide to deviate from the manufacturer’s intended installation method and/or modify the sink in any way.  Good luck!

Hi Jake, Thanks for reaching out. All of our Farmhouse sinks offer a 9" apron. We will also be updating our specification sheet to include this as the specification shown measures more than just the apron front. Please review the guideline below per your request. Please Note: The step-by-step guideline below is a general reference for installing the Kraus Farmhouse Sink. Please keep in mind that this is a custom installation. Delta recommends installing all Delta products by hiring a licensed, professional plumber. Step 1: Measures for Supports Measure the "true" height of the sink, from where the top aligns with the countertop surface to the bottom of the sink’s sides, which will rest on the supports. Transfer this measurement to the interior cabinet sides and mark a level line from back to front. This is where the supports will be added to carry the weight of the sink. Step 2: Install the Supports On each cabinet side, install 2" x 4' supports. Position the tops of the supports so that they are even with the level lines. Use construction adhesive and 1-5/8" square-drive deck screws to attach the supports. First, apply the adhesive then clamp the supports firmly in place, then drive the screws through the cabinet sides into each support. Step 3: Cut the Cabinet Front Measure the height of the sink front, and add 1/8” to this dimension when you mark the base cabinet front cutout. This allows the sink to rest just above the cut edge, without being supported by it. Depending on your base cabinet, it may be necessary to remove the doors and replace them with smaller doors. Use a jig saw to cut out the sink-front opening. Step 4: Install the Sink Test-fit the sink in the opening. The entire weight of the sink should be carried by the side supports. Check that the sink is level from side to side and front to back. If necessary, add tapered wood shims to adjust. Install the sink and use silicone caulk to fill in the gaps below the sink front, and between the sink and countertop.

Hi Jillay! Thank you for your question and we are happy to help. The Delta 95B931-33D-SS will not have enough space to install one of our glass rinsers. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Thank you for reaching out, we can answer that for you! This model sink 95A931-30S-SS is designed for a standard 24" depth cabinet, so you will not have to worry about sink and wall measurements, also the sink has a desk for placement of the faucet and accessory so that will also insure proper fit. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.

Hi Renovator, Thank you for contacting us at Delta Faucet! Yes, this stainless steel finish is a brushed finish. Please contact us directly if further assistance is needed at this time.   Best Regards, Tim Digital Communications Specialist

Hi Jose, We can certainly assist you with that! Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we may further assist you with the replacement you are looking for.

Thank you for your inquiry, I can answer that for you! This model sink 95B9031-32S has a 17" workstation ledge that can utilize colanders, you can use any colander for that size workstation. Kraus USA currently has one that works very well and it is the model CS-6. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.

Hi ToniD, Thank you for reaching out. You can definitely use Bar Keeper's Friend Soft Cleanser on the PVD Gunmetal finish. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any further questions or concerns.

Thank you for reaching out, this model sink comes with a cutout template with the proper cutout dimensions. Every model sink has unique cutout dimensions that are required, and this is due to the length, width, and corner radius. Because of this, each sink has a unique cutout that is not shared by other model sinks. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi, Thank you for your interest in our kitchen sink! The strainer basket acts as the drain stopper. You will have to push the strainer basket down into the drain. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.

Hi Renovator, We currently do not have plans for a 45" Farmhouse Workstation sink.

Hi Awewst, Thank you so much for reaching out, I can answer your inquiry. To acquire a matching flange for your disposal, you will want to reach out to the disposal manufacturer as they will have the flange selection you are looking for. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Chrisdee13, Thanks for reaching out to us. Yes, garbage disposals are 100% compatible with our sinks. Rather than install a disposal to the drain, the disposal will replace the drain as it has its own flange and mounts directly to the sink.

Hi Mark, Thank you very much for your purchase of our kitchen sink! we can certainly assist you with that. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with acquiring a replacement cutting board.

Hi New Builder, We currently do not have plans for a 45" Farmhouse Workstation sink.

Hi Joe, The apron front on all of our Farmhouse sinks measure 9" in height. Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com if further assistance is needed at this time.

Hi tprew, Thanks for your inquiry. The height of the middle divider is 4 ½”.

Hi Sandra, Thanks for reaching out to us. This sink is intended for an undermount installation and not intended to be installed as a drop-in / top mount sink. This sink also also requires a minimum cabinet size: 48" Left to Right, 24" Front to Back. Our Rivet and Lorelai sinks also offer the same finish, however, the radius of the corners in our Rivet Sink Collection are sharper. Rivet sinks offer an R0 radius in the vertical walls and an R5 radius in horizontal front and rear walls to aide in ease of cleaning and drainage. Hope this helps. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hello Keith, Thank you for your inquiry, I can answer that for you. Yes! this model sink 95A931-25S-SS does include a wood fiber cutting board. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Hi Jean, Thanks for reaching out to us. Stainless steel garbage disposals on the market will pair perfectly with our sink as it is made of T304 stainless steel.

Hi Pattyeyes, Thank you for your purchase of our kitchen sink! we can certainly assist you with that. When the strainer is pushed down into the locking position it should close the drain allow the basin to fill with water. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can take a look at your installation and assist you with the issue you are experiencing.

Thank you for reaching out, I can answer that for you. We do not recommend the creation of additional accessory holes as it can potentially compromise the structure of the sink. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.

Thanks for your inquiry. The boards can be placed on the top ledge and when turned at a 90 degree angle can also fit on the bottom ledge. The grid will be the only accessory that sits on the bottom of sink.

Hi Bernie, Thank you for your interest in our kitchen sink! I can answer that for you! You can search what retailers are selling this model 95B9031-33D-GS for by clicking on the where to buy button seen here - https://www.deltafaucet.com/where-to-buy?pid=95B9031-33D-GS Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.