Lavabo de cocina tipo estación de trabajo con un receptáculo de acero inoxidable calibre 16 de 23" de montaje bajo encimera, con reborde WorkFlow™ y accesorios en acero inoxidable

N.º de modelo: 95B9031-23S-SS
Lavabo de cocina tipo estación de trabajo con un receptáculo de acero inoxidable calibre 16 de 23" de montaje bajo encimera, con reborde WorkFlow™ y accesorios en acero inoxidable
N.º de modelo: 95B9031-23S-SS
CARACTERÍSTICAS DEL PRODUCTO
La colección de lavabos tipo estación de trabajo Rivet™ de Delta® tiene líneas definidas y esquinas redondeadas, con modernos accesorios que ofrecen un aspecto de estilo contemporáneo elegante. Este lavabo es ideal para maximizar el espacio en cocinas pequeñas. Incluye un reborde WorkFlow™ integrado con accesorios deslizantes, el cual crea un espacio de trabajo multifuncional que permite una transición fluida entre tareas. La tabla de cortar de fibra de madera crea espacio adicional en la encimera porque le permite trabajar sobre el lavabo. La alfombrilla de secado de silicona con desagüe propio canaliza el agua hacia el lavabo y evita que se mojen las encimeras de cocina. Su construcción de calibre TRU16™ altamente resistente ofrece mayor durabilidad para que pueda usar el lavabo con confianza. El diseño de montaje bajo encimera se instala fácilmente para ofrecer un aspecto prolijo sin que la cubierta de montaje quede expuesta, lo que le permite fregar el agua y las migas en el lavabo. El diseño de un receptáculo ofrece suficiente espacio para lavar objetos grandes, al tiempo que contiene el desorden y las salpicaduras dentro del lavabo. El aislamiento acústico NoiseDefend™ reduce el ruido y las vibraciones de los platos y el triturador de basura. El acabado SatinSheen™ proporciona una superficie lisa fácil de limpiar, para que el lavabo conserve su belleza con menos esfuerzo. Las ranuras acanaladas y el fondo inclinado mejoran el desagüe, y las esquinas EZClean™ reducen la acumulación de residuos con el tiempo. El kit de lavabo incluye tornillería de montaje, rejilla inferior protectora y un conjunto de desagüe para agilizar la instalación. Siéntase cómodo en su cocina sabiendo que los lavabos de Delta cuentan con el respaldo de una garantía limitada de por vida.
  • El LAVABO DE COCINA TIPO ESTACIÓN DE TRABAJO con reborde WorkFlow™ crea un espacio de trabajo multifuncional en la cocina y reduce el desorden porque le permite trabajar justo encima del lavabo. Las líneas definidas, las esquinas redondeadas y los accesorios modernos crean una estética contemporánea que realza cualquier estilo de cocina.
  • DIMENSIONES EXTERIORES DEL LAVABO: 23" L x 19" A x 9 1/2" P – Dimensiones del receptáculo: 21" L x 16" A x 9" P – Tamaño mínimo del armario: 27 in
  • El KIT INCLUYE lavabo tipo estación de trabajo de acero inoxidable, tabla de cortar de fibra de madera, alfombrilla de secado de silicona, rejilla inferior de acero inoxidable, conjunto de desagüe de acero inoxidable con cubierta desmontable. El lavabo listo para instalar viene con la tornillería y plantilla de corte incluidas.
  • ACERO INOXIDABLE CALIBRE TRU16™: Los lavabos tipo estación de trabajo de DELTA® están fabricados con acero calibre 16 altamente resistente para soportar las necesidades diarias y ofrecer larga durabilidad. El acabado SatinSheen™ resistente al desgaste es fácil de mantener y resiste el óxido, la corrosión y la decoloración.
  • El LAVABO DE MONTAJE BAJO ENCIMERA se instala fácilmente para crear un aspecto prolijo sin que la cubierta de montaje quede expuesta, lo que le permite fregar el agua y las migas en el lavabo. El diseño de un receptáculo con desagüe desplazado hacia atrás ofrece amplio espacio para lavar objetos grandes y más espacio de almacenamiento en el armario inferior.
  • La tecnología de AISLAMIENTO ACÚSTICO NOISEDEFEND™ con almohadillas insonorizantes extragruesas en todos los lados del lavabo reduce en gran medida el ruido y las vibraciones mientras el lavabo está en uso. El revestimiento inferior anticondensación previene la acumulación de humedad para reducir el riesgo de daños por agua en los armarios inferiores.
  • La TABLA DE CORTAR DE FIBRA DE MADERA se coloca de forma segura sobre el lavabo para poder cortar y rebanar sin ocupar espacio en la encimera de la cocina. La superficie no porosa es fácil de limpiar.
  • La ALFOMBRILLA DE SECADO DE SILICONA con superficie antideslizante es ideal para secar platos, cristalería y utensilios, además de que despeja el desorden de las encimeras de la cocina. El diseño con desagüe propio canaliza el agua directamente al lavabo y evita que tenga que mojar las encimeras. La construcción de silicona flexible es impermeable y apta para lavavajillas.
  • La REJILLA INFERIOR DE ACERO INOXIDABLE mantiene los platos elevados para mejorar el desagüe y protege la superficie del lavabo. Es apto para lavavajillas para facilitar su mantenimiento. El conjunto de desagüe de acero inoxidable mantiene despejada la tubería de desagüe y evita obstrucciones. La cubierta desmontable se ajusta a la abertura del desagüe y a la mayoría de los trituradores de basura, brinda un aspecto prolijo y facilita el desagüe.
  • El LAVABO FÁCIL DE LIMPIAR tiene una superficie no porosa y esquinas redondeadas EZClean™ en la parte inferior del lavabo que evitan la acumulación de residuos con el tiempo. Las ranuras de desagüe canalizan el agua directamente hacia el desagüe y evitan que el agua se acumule en el lavabo. La pendiente optimizada evita que las copas frágiles se vuelquen. Certificaciones cUPC (ASME A112.19.3 CSA B45.4).
Documentos y especificaciones
Información de instalación
Configuración del receptáculo:
Un receptáculo
Tipo de montaje:
Montaje inferior
Forma del lavabo:
Rectangular
Cantidad de pilas:
1
Longitud total:
23
Ancho total:
19
Longitud del receptáculo:
21
Ancho del receptáculo:
16
Profundidad del receptáculo:
9
Tamaño mínimo del armario:
27
Longitud de la tabla de cortar:
12
Ancho de la tabla de cortar:
16.88
Altura de la tabla de cortar:
0.25
Desagüe incluido:
Abertura del desagüe:
3.88
Tornillería para el montaje incluida:
Calibre del lavabo:
16
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

RESEÑAS
Rated 5 out of 5 by from Great sink! Great sink - large and very functional!
Date published: 2024-10-12
Rated 5 out of 5 by from Great look! What a beautiful sink. The accessories are great.
Date published: 2024-09-24
Rated 5 out of 5 by from Perfect sink A nice clean sink. It is easy to work in and easy to keep clean.
Date published: 2024-08-31
Rated 5 out of 5 by from Awesome Sweet looking functional sink.
Date published: 2024-07-15
Rated 5 out of 5 by from Well Designed Sink This is a beautiful, well-built sink that has great size, shape and functionality for our laundry room utility sink. The included accessories are great to have included. It was easy to install.
Date published: 2024-06-25
Rated 4 out of 5 by from Nice looking, Good performance Very well constructed and attractive. The drain strainer and plug are good and oversized to allow straining of soils. Bottom slope is a little flatter than I would like. The accessories are excellent.
Date published: 2024-05-23
Rated 1 out of 5 by from Disappointed… A couple letters on the Delta logo is worn off so it looks like it’s dirty and water pools on the bottom (doesn’t drain down) so it’s very spotty. The look is good, we put it in for a basement bar (we wanted something bigger than a traditional bar sink). But disappointed with those two things given the price we paid.
Date published: 2024-04-15
Rated 4 out of 5 by from Delta Workstation Kitchen Sink Great Sink, happy with the quality. Would be 5 Star, if it had a steeper slope towards drain.
Date published: 2024-03-28
  • y_2024, m_11, d_23, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_en_US, sid_95B9031-23S-SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

Will a positive reveal create dual tiers?

Asked by: MaryBski
Hi Mary, Thank you for your interest in our kitchen sink! I can answer that for you. This model sink 95B931-30S-SS is a single tier workstation sink and you cannot create an additional tier that is compatible with our workstation accessories. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31

Il est clairement dit que les rebords du fond ont un rayon facilitant le nettoyage (Ezclean), mais qu'en est-il des rebords des arêtes des côtés de la cuve ?

Asked by: Missmath

Do you have a dxf file to cut this sink for CNC machine?

Asked by: khowell
Hi Howell, That is a great question and I can help you with that. We do have DXF file available for CNC machines, we can email them to you. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can send you the file you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Hi, Is there any way to buy replacement or additional workstation sink accessories? (i.e. a 2nd cutting board, or the collander/bowl or dishrack that comes with larger sinks)

Asked by: Angela
Hi Angela, Thank you for reaching out, we can certainly assist you with that! Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with getting the accessories you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Regarding the 33" sink, what is the height of the front apron? I'm asking to determine clearance relative to the sink cabinet doors.

Asked by: Tom314
Hi Tom314, The apron is 9" in height.
Answered by: Customer Service
Date published: 2024-03-28

I'm lolling looking for a workstation sink to replace my current sink. The cutout in the granite is 30" wide X 17" deep. Is there a sink that will fit this opening?

Asked by: Jdkitch

What is radius in all corners of the sink? The description reads like only the horizontal corners in bottom of the bowl are rounded while the vertical ones may be zero radius.

Asked by: JordanS
Hi JordanS, Thanks for reaching out to us! Our Workstation sinks offer an R0 radius in the vertical walls allows for all 90 degree angles at the ledge and vertical weld points and an R5 radius in the horizontal front and rear walls to aid in ease of cleaning and drainage.
Answered by: Customer Service
Date published: 2024-03-28

need a dxf file for MODEL#: 95B9031-30S-GS Rivet 16 Gauge Black Stainless Steel 30 in. Single Bowl Undermount Workstation Kitchen Sink in PVD Gunmetal Finish

Asked by: Swamper
Hi Swamper, We can help you with that, Please feel free to email at sinksupport@deltafaucet.com so we can provide you with that DXF file you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Is there a knockout for a soap dispenser on this sink? It looks like it in the pics but I can't find anywhere where it says it specifically.

Asked by: Alex1234
Hi Alex, Thank you for your interest in our kitchen sink! I can answer that for you. This model sink 95A931-33S-SS does has an accessory hole for dispenser and other accessories alike, it comes with a cover in case you do not wish to use it. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31

My countertop manufacturer communicated to me that this sink requires a 1/4” radi for the sink cutout.  Is this accurate?  Please advise.

Asked by: Mila
Hi Mila, That is a great question and I can answer that for you! You can see the exact cutout dimensions on the last page in the document in the link below: https://media.deltafaucet.com/MandI/95B931-30S-SS-IMs%20&%20cutout.pdf Please feel free to contact us directly by phone at 1-800-345-3358 with any additional questions.
Answered by: Customer Service
Date published: 2024-02-13

What is the difference between the 32" Lorelai and the 32" Rivet, other than the drain placement?

Asked by: Myke 1
Hello Myke 1! Thank you for your question and we are happy to help. The difference is the choice in finish that is available of each along with the drain placement. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

what type of stainless steel is this? SS304? SS210? or SS410? Does it have a rounded radius inside corners? Please provide closeup picture if possible on the inside radius. Are the connections micro welded?

Asked by: Louis
Thanks for reaching out. Our stainless steel sinks are made of T304 steel. Our Workstation sinks offer an R0 radius in the vertical walls allows for all 90 degree angles at the ledge and vertical weld points and an R5 radius in the horizontal front and rear walls to aid in ease of cleaning and drainage. We would also be happy to answer any additional questions you would have. Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com
Answered by: MSINK
Date published: 2024-03-28

What grade of stainless steel is this made from? Is it 304?

Asked by: kitchenrenovator
Hi kitchenrenovator, Yes, this sink is constructed out of premium T304 stainless steel.
Answered by: Customer Service
Date published: 2024-03-28

How deep is this sink?

Asked by: GoToGirl425
Hello, Thank you for your interest in our kitchen sink! I can answer that for you. The 95A931-33D-SS is 9 inches deep. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-10-01

I like everything about the Rivet except the black cutting board. Is it possible to get the wood cutting board like the one for the Lorelai instead?

Asked by: CanaLau
Hi CanaLau, Thank you for your purchase of our Kitchen sink! we can assist you with that. You can purchase another cutting board like the model ABU24-VWCB-AC from us directly. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with getting the cutting board you are looking for.
Answered by: Customer Service
Date published: 2023-11-28

How do you clean the Rivet sink? What products do we use. I have a mark that came on the sink out of the box and I'm trying to figure out what I can use to try and clean it

Asked by: SCastillo
Hi SCastillo, Thanks for reaching out to us. For a thorough cleaning, use water and a mild liquid soap detergent (ammonia-free). Apply the cleaner with a soft sponge, then rinse with lukewarm water and pat dry with a microfiber cleaning cloth. Polishing your sink weekly will help to retain the luster of the stainless steel. Products to consider include: Barkeepers Friend, Weimann Stainless Steel Cleaner, Howard Naturals Stainless Cleaner. We also recommend avoiding cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine. These products may damage the sink surface.
Answered by: Customer Service
Date published: 2024-03-28

Regarding MODEL#: 95B9031-24SL-SS and 95B9031-32SL-SS: Where are these sinks manufactured? Or what is the country of origin?

Asked by: Karen52
Hi Karen52, Thank you for your interest in our kitchen sinks! We source best-in-class components and materials from around the world and assemble our products in factories throughout Europe and Asia. No matter where in the world our products are sourced, manufactured and assembled, you can be assured that every piece is built with utmost care to exacting DFC specification, as well as conforming to all relevant State and Federal codes. These model sinks are assembled in China. Rigorous quality testing, performed by our Quality Control inspectors, ensures a long-lasting lifetime of service. The location information on the back of the box will tell you which global DFC manufacturing location your product was made in. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-03-28

Other than the accessories that are already included with the Delta Rivet model# 95B931-32S-SS workstation, are there any additional accessories that can be purchased? I would like a colander to drain pasta & wash vegetables.

Asked by: Alice
Hi Alice, Thank you for your interest in our kitchen sink! I can answer that for you. Unfortunately, we do not manufacture a colander you can purchase separately. However, our sister company, Kraus, manufactures a compatible colander, model CS-6, which will fit in the sink: https://www.kraususa.com/kraus-stainless-steel-colander-for-workstation-kitchen-sink.html Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-09-26

I would like to know how to purchase an extra accessory kit for my Rivet stainless steel 30” u undermount sink. (The cutting board, rollup dish rack and bottom grid

Asked by: Pam shrader
Thank you for reaching out, we can answer that for you. To purchase an extra accessory kit, please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-03-27

Are there any plans to create an 45 inch farmhouse / apron front version of the Rivet sink?

Asked by: New Builder
Hi New Builder, We currently do not have plans for a 45" Farmhouse Workstation sink.
Answered by: MSINK
Date published: 2024-03-28

Is there a way to order the cut-out template ?  I have an existing cut-out that I need to include entirely in the new cut out.

Asked by: Bill
Hey Bill, A template is available for purchase by calling Delta customer service. 
Answered by: Sammy27
Date published: 2024-08-30

What is the grade of stainless steel used in this sink, and chromium and nickel content?

Asked by: Pchappy
Hi Chappy, Thank you for your interest in our kitchen sink! I can answer that for you. This model sink is made of T304 Stainless Steel and has an 18/10 Chromium Nickel Ratio. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2023-09-09

How do I obtain a replacement cutting board?

Asked by: Nicolina

can this sink be installed in a 30" sink base cabinet?

Asked by: davidp
Hi davidp, Thanks for reaching out. Yes, the minimum recommended cabinet size for our 95B931-27-SS is 30”. This is to ensure that there is enough space within the cabinet for the mounting hardware included with the sink.
Answered by: Customer Service
Date published: 2024-03-28

How high is the middle divider between the two sides? 

Asked by: Dolly
Hello Dolly, That is a really good question, the height of the center divider for this model sink is 5". This is height enough to fill the basin mostly with water while simultaneously low enough to make the transfer of items from one basin to the other a breeze.
Answered by: Reid Delta
Date published: 2024-03-28

What should size of hole, or cut out dimensions, be for 33 X 22 item 95A931-33S-SS?  

Asked by: Sonny
Hi Sonny, Thanks for reaching out to us. We recommend using the cardboard template that is included with the sink or the DXF File, as the radius of the corners need to be factored into the cut. Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com if further assistance is needed at this time.
Answered by: MSINK
Date published: 2024-03-28

Can the Rivet 33" Farmhouse sink be flush mounted? Thanks.

Asked by: lolli
Thank you for your interest in our kitchen sink! The 95C9031-33S-SS cannot be flush mounted. It is an undermount farmhouse sink and can only be undermounted. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-10-07

Same sink with right side drain

Asked by: Sue14
Hi Sue14, This sink is currently available with only this drain orientation.
Answered by: Customer Service
Date published: 2023-03-19

What is included in the Limited Lifetime warranty re: 33” Workstation Kitchen Sink Undermount 16 Gauge Stainless Steel 50/50 Double Bowl With WorkFlow™ Ledge in Stainless Steel? I have read that pitting has occurred from coffee grounds, and scratches easy

Asked by: SRS5
SRS5, Thank you for reaching out! An explanation of warranty coverage can be found on our website under the Customer Service section at the bottom of our home page or by simply following the link below. https://www.deltafaucet.com/warranty As for claims of pitting and rust, in most cases any discoloration or markings on the sink will only be surface deep and can easily be removed with the use of a high quality cleaner and conditioner such as "The Bar Keepers Friend" soft liquid and a soft cloth towel. All Delta sinks will be manufactured using the highest quality T304 stainless steel and although impervious to pitting and rust, will share a common characteristic of all stainless steel sinks where usage/surface scratches are inevitable. Please be sure to follow our care and cleaning guide to help maintain your sink and keep the finish as clean as possible. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional question
Answered by: Customer Service
Date published: 2024-03-28

What is the length of the apron on the 36" stainless steel farmhouse workstation sink? How tall is it?

Asked by: Lew72
Hi Lew, Thank you for your interest in our kitchen sink, I can answer that for you. The apron for this model sink 95C9031-36S-SS measures 35 7/8"L x 9"H Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31
  • y_2024, m_11, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_73
  • loc_en_US, sid_95B9031-23S-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 40ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.