Lavabo de cocina tipo estación de trabajo con un receptáculo calibre 16 de 30" de montaje bajo encimera, con reborde WorkFlow™ y accesorios en PVD gris plomizo
N.º de modelo: 95B9031-30S-GS
Image Thumbnail, click to view zoomed product image 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
nulo 
CARACTERÍSTICAS DEL PRODUCTO
Los lavabos tipo estación de trabajo de montaje bajo encimera Rivet™ de Delta® con acabado en acero inoxidable negro ofrecen una opción de color llamativa para los lavabos de cocina y cuentan con líneas definidas, esquinas bien redondeadas y accesorios modernos que no pasan inadvertidos en ningún espacio. Estos lavabos, diseñados con un reborde WorkFlow™ integrado que es compatible con accesorios deslizantes, crean un espacio de trabajo multifuncional que permite una transición fluida entre tareas. La tabla de cortar negra a juego y el escurridor de platos enrollable realzan la estética moderna de su lavabo y le permiten preparar alimentos y limpiar de forma práctica en un solo lugar. Estos lavabos son más duraderos y de mantenimiento sencillo gracias a que están fabricados en acero inoxidable calibre TRU16® altamente resistente. El acabado PVD DuraShield™ con textura mate arenada mejora la resistencia a la corrosión y los rayones, y previene las marcas de agua y de dedos. El diseño de montaje bajo encimera se instala fácilmente para ofrecer un aspecto prolijo sin que la cubierta de montaje quede expuesta, lo que le permite fregar el agua y las migas directamente en el lavabo. El aislamiento acústico NoiseDefend® reduce el ruido y las vibraciones mientras el lavabo está en uso. El receptáculo profundo con fondo suavemente inclinado y ranuras acanaladas tiene capacidad para muchos platos y facilita el desagüe, al tiempo que contiene el desorden y las salpicaduras dentro del lavabo. El kit de lavabo incluye rejilla inferior, conjunto de desagüe y tornillería de montaje. Con el respaldo de una garantía limitada de por vida para que pueda elegir los productos de Delta® con confianza
- El LAVABO TIPO ESTACIÓN DE TRABAJO DE ACERO INOXIDABLE NEGRO con reborde WorkFlow™ crea un espacio de trabajo multifuncional en la cocina y reduce el desorden porque le permite trabajar justo encima del lavabo. El lavabo de montaje bajo encimera ofrece un aspecto y una sensación refinados con una transición continua de la encimera al lavabo. Diseñado con líneas definidas, esquinas bien redondeadas y accesorios modernos que no pasan inadvertidos en ninguna cocina.
- DIMENSIONES EXTERIORES DEL LAVABO: 30" L x 19" A x 9.5" P – Dimensiones del receptáculo: 28" L x 16" A x 9" P – Tamaño mínimo del armario: 33" – El KIT INCLUYE lavabo tipo estación de trabajo, tabla de cortar, escurridor de platos enrollable con soporte para utensilios, alfombrilla de secado de silicona, rejilla inferior de acero inoxidable y conjunto de desagüe con cubierta decorativa en acabado a juego.
- LARGA DURABILIDAD: Fabricado con acero inoxidable calibre TRU16® altamente resistente para soportar las necesidades diarias y resistir abolladuras y daños. - TECNOLOGÍA PVD DURASHIELD™: La innovadora aplicación de acabado con nanorrevestimiento brinda mayor durabilidad con gran resistencia a la corrosión y los rayones. La superficie mate arenada previene las marcas de agua y de dedos, y es fácil de limpiar.
- El ACABADO EN ACERO INOXIDABLE NEGRO con efecto brillante ofrece una opción de color atrevida para los lavabos de cocina y crea una pieza central llamativa que complementa los electrodomésticos de cocina negros. LAVABO FÁCIL DE LIMPIAR con una superficie no porosa y esquinas redondeadas EZClean™ en la parte inferior del lavabo que ayudan a prevenir la acumulación de residuos con el tiempo.
- El DISEÑO DE MONTAJE BAJO ENCIMERA ofrece transición continua de la encimera al lavabo. Esto facilita la limpieza de la encimera porque le permite fregar el agua y las migas directamente en el lavabo. El lavabo se monta debajo de la encimera, sin una cubierta de montaje expuesta donde queden residuos, y crea un aspecto de estilo contemporáneo elegante.
- EL RECEPTÁCULO AMPLIO Y PROFUNDO tiene capacidad para utensilios de gran tamaño, al tiempo que contiene el desorden y las salpicaduras dentro del lavabo. DISEÑADO PARA FACILITAR EL DESAGÜE con ranuras de desagüe y fondo suavemente inclinado que evitan que el agua se acumule en el lavabo. La pendiente optimizada evita que las copas frágiles se vuelquen. Los desagües DESPLAZADOS HACIA ATRÁS permiten contar con más espacio de almacenamiento en el armario inferior.
- AISLAMIENTO ACÚSTICO NOISEDEFEND® con grandes almohadillas insonorizantes en todos los lados del lavabo que reducen en gran medida el ruido y las vibraciones del triturador de basura y el golpeteo de los platos. COMPLETAMENTE AISLADO con revestimiento inferior que previene la acumulación de humedad y reduce el riesgo de daños por agua en los armarios inferiores.
- La TABLA DE CORTAR DE FIBRA DE MADERA le permite cortar y rebanar sin ocupar espacio en la encimera; su superficie no porosa es fácil de limpiar. El ESCURRIDOR DE PLATOS ENROLLABLE CON SOPORTE PARA UTENSILIOS fabricado en acero inoxidable macizo y con recubrimiento de silicona antideslizante es perfecto para secar los platos y lavar frutas y verduras. Es apto para lavavajillas, soporta temperaturas de hasta 400 °F y tiene capacidad para 85 lb. La ALFOMBRILLA DE SECADO DE SILICONA con desagüe propio para secar cristalería y utensilios evita que tenga que mojar las encimeras de su cocina.
- La REJILLA INFERIOR con acabado en acero inoxidable negro a juego mantiene los platos elevados para mejorar el desagüe y protege la superficie del lavabo de abolladuras y rayones. Es apto para lavavajillas para facilitar su mantenimiento. El CONJUNTO DE DESAGÜE con cubierta con acabado a juego evita obstrucciones porque mantiene despejada la tubería de desagüe. La cubierta desmontable con laterales abiertos se ajusta a la abertura del desagüe y a la mayoría de los trituradores de basura, brinda un aspecto prolijo y facilita el desagüe.
- LISTO PARA INSTALAR con toda la tornillería de montaje, rejilla inferior y conjunto de desagüe para que pueda llevar adelante su proyecto de mejora del hogar con facilidad. Plantilla de corte incluida para instalarlo con montaje bajo encimera. Con el respaldo de una GARANTÍA LIMITADA DE POR VIDA. Certificaciones cUPC (ASME A112.19.3 CSA B45.4).
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Configuración del receptáculo:
Un receptáculo
Tipo de montaje:
Montaje inferior
Forma del lavabo:
Rectangular
Cantidad de pilas:
1
Longitud total:
30
Ancho total:
19
Longitud del receptáculo:
28
Ancho del receptáculo:
16
Profundidad del receptáculo:
9
Tamaño mínimo del armario:
33
Longitud de la tabla de cortar:
12
Ancho de la tabla de cortar:
16.75
Altura de la tabla de cortar:
0.75
Desagüe incluido:
Sí
Abertura del desagüe:
3.88
Tornillería para el montaje incluida:
Sí
Calibre del lavabo:
16
Tipo de válvula:
NA
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
RESEÑAS
Rated 5 out of
5
by
Jim from
Great sink!
Great sink - large and very functional!
Date published: 2024-10-12
Rated 5 out of
5
by
Leticia from
Great look!
What a beautiful sink. The accessories are great.
Date published: 2024-09-24
Rated 5 out of
5
by
Anonymous from
Perfect sink
A nice clean sink. It is easy to work in and easy to keep clean.
Date published: 2024-08-31
Rated 5 out of
5
by
RN from
Awesome
Sweet looking functional sink.
Date published: 2024-07-15
Rated 5 out of
5
by
Chris from
Well Designed Sink
This is a beautiful, well-built sink that has great size, shape and functionality for our laundry room utility sink. The included accessories are great to have included. It was easy to install.
Date published: 2024-06-25
Rated 4 out of
5
by
Home Improver from
Nice looking, Good performance
Very well constructed and attractive. The drain strainer and plug are good and oversized to allow straining of soils. Bottom slope is a little flatter than I would like. The accessories are excellent.
Date published: 2024-05-23
Rated 1 out of
5
by
Jessica from
Disappointed…
A couple letters on the Delta logo is worn off so it looks like it’s dirty and water pools on the bottom (doesn’t drain down) so it’s very spotty. The look is good, we put it in for a basement bar (we wanted something bigger than a traditional bar sink). But disappointed with those two things given the price we paid.
Date published: 2024-04-15
Rated 4 out of
5
by
MBF from
Delta Workstation Kitchen Sink
Great Sink, happy with the quality. Would be 5 Star, if it had a steeper slope towards drain.
Date published: 2024-03-28
Preguntas y respuestas
What is the length of the apron on the 36" stainless steel farmhouse workstation sink? How tall is it?
Hi Lew,
Thank you for your interest in our kitchen sink, I can answer that for you.
The apron for this model sink 95C9031-36S-SS measures 35 7/8"L x 9"H
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-01-31
What is the dimension of the workflow ledge - i.e., how far does it protrude into the sink basin? What is the inner basin measurement edge to edge vs. ledge to ledge?
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com and we would be happy to assist you directly.
Date published: 2024-03-28
I bought this sink, now I need to buy a faucet and soap dispenser. Is there a certain model faucet recommended over others due to the large size?
Hi Michelle,
That is a great question and we can answer that for you!
We recommend any of our Tall/High Arc Kitchen Faucets that you can see here - https://www.deltafaucet.com/kitchen/faucets/high-arc
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-03-05
What is the inches under the sink?
Hi Jt19,
Thank you for your interest in our kitchen sink! I can answer your inquiry.
This model sink has an overall depth height of 12 1/2"
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-03-28
Stainless Steel Drying Rack for my 32-inch Delta Lorelai Sink Hi, do you know where I can purchase the Delta Stainless Steel Drying Rack to use with my 32-inch Delta Lorelai sink? Thank you! William
Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com and we would be happy to assist you directly.
Date published: 2024-03-28
What is the measurement between the top of the basin and the top of each of the workflow ledges?
Top measures 12mm from Workstation ledge and and bottom 55mm from Workstation ledge.
Hope this helps.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-03-28
How do purchase another accessory kit? My sink didn’t come with on.
Hi Tom,
Thank you for your purchase of our kitchen sink! I am sorry to hear you were missing some included accessories for your sink.
Do not worry however, we can assist you with that.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can get you the missing accessories you require.
Date published: 2024-01-31
Can you please give me a price
Hi Shirley,
Thank you for your interest in our kitchen sink! we can help you with that.
The pricing is provided by the retailer you will purchase the sink through, you can view all the retailers and the pricing here - https://www.deltafaucet.com/where-to-buy?pid=95A931-33D-SS#wheretobuy-shoponline
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-01-31
My Rivet sink was installed in December 2021 and in two months has developed rust in one corner seam. What can be done about this? I have never used anything but mild soap to clean the sink and wipe it down to keep it dry every evening. Not happy!
Thanks so much for reaching out to us. We are sorry to hear that you are experiencing these stains on your new sink. I assure you, they are not rust marks. Typically, when red spots appear on a Stainless Steel Sink like ours it is simply surface discoloration. This is usually taken care of permanently with a stainless steel polish and/or cleaner when used according to the directions of the cleaning product. Products such as Bar Keeper’s friend and a fine 3M Scotch Brite pad are both great options.
Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions. Happy to assist.
Date published: 2024-03-28
Can this sink be undercounted?
Hey Ilikeitbut39,
Any sink can be undermounted as long as it’s adequately supported (note that the supplied hardware will not work and you’ll have to provide your own) and the joint between the rim and the underside of the countertop has a continuous seal. Just be aware that in addition to voiding your warranty you’ll most likely be on your own with regard to customer support if you decide to deviate from the manufacturer’s intended installation method and/or modify the sink in any way.
Good luck!
Date published: 2024-08-30
what is the cutout depth for install for the 36" Workstation Farmhouse apron front kitchen sink (95C9031-36S-SS)? An above response says "The apron front on all of our Farmhouse sinks measure 9" in height" however the specs show a 10" apron for this sink.
Hi Jake,
Thanks for reaching out.
All of our Farmhouse sinks offer a 9" apron. We will also be updating our specification sheet to include this as the specification shown measures more than just the apron front.
Please review the guideline below per your request.
Please Note: The step-by-step guideline below is a general reference for installing the Kraus Farmhouse Sink. Please keep in mind that this is a custom installation. Delta recommends installing all Delta products by hiring a licensed, professional plumber.
Step 1: Measures for Supports
Measure the "true" height of the sink, from where the top aligns with the countertop surface to the bottom of the sink’s sides, which will rest on the supports.
Transfer this measurement to the interior cabinet sides and mark a level line from back to front. This is where the supports will be added to carry the weight of the sink.
Step 2: Install the Supports
On each cabinet side, install 2" x 4' supports. Position the tops of the supports so that they are even with the level lines. Use construction adhesive and 1-5/8" square-drive deck screws to attach the supports. First, apply the adhesive then clamp the supports firmly in place, then drive the screws through the cabinet sides into each support.
Step 3: Cut the Cabinet Front
Measure the height of the sink front, and add 1/8” to this dimension when you mark the base cabinet front cutout. This allows the sink to rest just above the cut edge, without being supported by it. Depending on your base cabinet, it may be necessary to remove the doors and replace them with smaller doors.
Use a jig saw to cut out the sink-front opening.
Step 4: Install the Sink
Test-fit the sink in the opening. The entire weight of the sink should be carried by the side supports. Check that the sink is level from side to side and front to back. If necessary, add tapered wood shims to adjust.
Install the sink and use silicone caulk to fill in the gaps below the sink front, and between the sink and countertop.
Date published: 2024-03-28
Looking to purchase 33” Rivet under mount workstation sink. Can I use the delta glass rinser with this?
Hi Jillay!
Thank you for your question and we are happy to help. The Delta 95B931-33D-SS will not have enough space to install one of our glass rinsers. With any further questions or concerns, please do not hesitate to reach out to us again.
Best Regards,
Carrie
Date published: 2024-03-28
Hi how much space do I need on the back of the sink to a wall? I have just under 2” from wall to edge of hole.
Thank you for reaching out, we can answer that for you!
This model sink 95A931-30S-SS is designed for a standard 24" depth cabinet, so you will not have to worry about sink and wall measurements, also the sink has a desk for placement of the faucet and accessory so that will also insure proper fit.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.
Date published: 2024-08-30
How long is the apron front please 6”, 10”?
Thank you for your interest in our kitchen sink! The apron front on the 95D9031-T36S-GS is 9". For more specs, see the following link: https://media.deltafaucet.com/SpecSheet/95D9031-T36S-GS%20All%20Spec%20Sheets.pdf
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-11-28
Can you describe the finish? Is it brushed?
Hi Renovator,
Thank you for contacting us at Delta Faucet!
Yes, this stainless steel finish is a brushed finish.
Please contact us directly if further assistance is needed at this time.
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
Is there a link for a replacement black drain cover??
Hi Jose,
We can certainly assist you with that!
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we may further assist you with the replacement you are looking for.
Date published: 2024-08-30
What is the exact size of the cut out for installation (Top mount drop-in installation) of the 95D9031-T36S-GS?
Hello, thank you for your interest in our kitchen sink! The cutout size for the 95D9031-T36S-GS is 892*529mm. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-10-03
Is it possible to buy a colander that fits the 32 in sink?
Thank you for your inquiry, I can answer that for you!
This model sink 95B9031-32S has a 17" workstation ledge that can utilize colanders, you can use any colander for that size workstation.
Kraus USA currently has one that works very well and it is the model CS-6.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.
Date published: 2024-06-12
Can one use Bar Keepers Friend to clean the PVD Gunmetal double bowl workstation sink Model#: 95B9031-33D-GS or will that damage the black coating/color/finish?
Hi ToniD,
Thank you for reaching out. You can definitely use Bar Keeper's Friend Soft Cleanser on the PVD Gunmetal finish. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any further questions or concerns.
Date published: 2024-04-17
What is the cut out size for 95A931-33S-SS?
Thank you for reaching out, this model sink comes with a cutout template with the proper cutout dimensions. Every model sink has unique cutout dimensions that are required, and this is due to the length, width, and corner radius. Because of this, each sink has a unique cutout that is not shared by other model sinks.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-01-31
My rivet 33 inch came with the drains, but no drain plugs to hold water in the sink. Is there a stopper for purchase that would match the gunmetal grey steel sink?
Hi, Thank you for your interest in our kitchen sink! The strainer basket acts as the drain stopper. You will have to push the strainer basket down into the drain. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions or concerns.
Date published: 2024-07-10
Any plans to make a 45 inch apron front model?
Hi Renovator,
We currently do not have plans for a 45" Farmhouse Workstation sink.
Date published: 2024-03-28
I need a matching garbage disposal flange. Can you help with that?
Hi Awewst,
Thank you so much for reaching out, I can answer your inquiry.
To acquire a matching flange for your disposal, you will want to reach out to the disposal manufacturer as they will have the flange selection you are looking for.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2023-06-12
What do I need to accommodate a garbage disposer? The drain that came with it will not work with my garbage disposer.
Hi Chrisdee13,
Thanks for reaching out to us. Yes, garbage disposals are 100% compatible with our sinks. Rather than install a disposal to the drain, the disposal will replace the drain as it has its own flange and mounts directly to the sink.
Date published: 2024-03-28
Hello, my wife just bought this sink for our new renovated kitchen. I'm looking at some Moen garbage disposals for this sink. These are two thus far: Model: EX100C and Model GXS75C. Can you please tell me what size disposal I need for this sink? TY!
Thank you for your interest in our kitchen sink! You can install any garbage disposal unit to our 95C9031-30S-SS sink model. If it up to you to decide the type of disposal unit works best for you. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-11-28
I have the 25" Rivet Workstation Sink, MODEL#: 95A931-25S-SS. Can I purchase a replacement Cutting Board?
Hi Mark,
Thank you very much for your purchase of our kitchen sink! we can certainly assist you with that.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with acquiring a replacement cutting board.
Date published: 2024-03-28
Is there any plans to make a 45 inch apron version of this sink? Some competitors are starting to and that's the size we would need.
Hi New Builder,
We currently do not have plans for a 45" Farmhouse Workstation sink.
Date published: 2024-03-28
95C9031-36S-SS What is the height of the apron? You should include this in the specs so the cabinet fronts can be sized accordingly.
Hi Joe,
The apron front on all of our Farmhouse sinks measure 9" in height.
Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com if further assistance is needed at this time.
Date published: 2024-03-28
What is the height of the divider for the double sink?
Hi tprew,
Thanks for your inquiry. The height of the middle divider is 4 ½”.
Date published: 2024-03-28
2 Questions. Can you surface mount this sink? (Drop In)? My current sink is 43" elkay drop in. Want to replace it with this sink. My inside cabinet width is 43 1/2. What is the difference between Rivet & Lorelai finishes?
Hi Sandra,
Thanks for reaching out to us. This sink is intended for an undermount installation and not intended to be installed as a drop-in / top mount sink. This sink also also requires a minimum cabinet size: 48" Left to Right, 24" Front to Back. Our Rivet and Lorelai sinks also offer the same finish, however, the radius of the corners in our Rivet Sink Collection are sharper. Rivet sinks offer an R0 radius in the vertical walls and an R5 radius in horizontal front and rear walls to aide in ease of cleaning and drainage.
Hope this helps.
Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.