Lavabo de cocina tipo estación de trabajo con un receptáculo de acero inoxidable calibre 16 de 45" de montaje bajo encimera con reborde WorkFlow™ de dos niveles y accesorios en acero inoxidable

N.º de modelo: 95BA131-45S-SS
Lavabo de cocina tipo estación de trabajo con un receptáculo de acero inoxidable calibre 16 de 45" de montaje bajo encimera con reborde WorkFlow™ de dos niveles y accesorios en acero inoxidable
N.º de modelo: 95BA131-45S-SS
CARACTERÍSTICAS DEL PRODUCTO
La colección de lavabos tipo estación de trabajo Rivet™ de Delta® tiene líneas definidas y esquinas bien redondeadas, con modernos accesorios que ofrecen un aspecto de estilo contemporáneo elegante. Este impresionante lavabo de 45 pulgadas está diseñado con dimensiones generosas y un reborde WorkFlow™ de dos niveles integrado que permite deslizar los accesorios por el lavabo en dos niveles para una transición fluida entre tareas. El kit de accesorios prémium del chef de 11 piezas incluye una tabla de cortar de fibra de madera, un juego para servir a juego con bol y colador, escurridor de platos enrollable, escurridor de platos y alfombrilla de secado, para que pueda preparar los alimentos y limpiar de forma práctica en un solo lugar. El acero inoxidable calibre TRU16™ altamente resistente ofrece mayor durabilidad. El diseño de montaje bajo encimera se instala fácilmente sin que la cubierta de montaje quede expuesta, lo que le permite fregar el agua y las migas directamente en el lavabo. El receptáculo grande y profundo ofrece amplio espacio para lavar objetos grandes, al tiempo que contiene el desorden y las salpicaduras dentro del lavabo. El aislamiento acústico multicapa NoiseDefend™ reduce el ruido y las vibraciones de los platos, el agua corriente y el triturador de basura. El acabado SatinSheen™ proporciona una superficie lisa fácil de limpiar. Las ranuras acanaladas y el fondo inclinado ayudan a mejorar el desagüe, y las esquinas EZClean™ de la parte inferior del lavabo reducen la acumulación de residuos. El kit incluye tornillería de montaje, rejilla inferior protectora y un conjunto de desagüe de acero inoxidable para agilizar la instalación. Siéntase cómodo en su cocina sabiendo que los lavabos de Delta® cuentan con el respaldo de una garantía limitada de por vida.
  • El LAVABO DE COCINA TIPO ESTACIÓN DE TRABAJO DE 45-INCH con reborde WorkFlow™ de 2 niveles le permite deslizar los accesorios por el lavabo en 2 niveles para crear un espacio de trabajo multifuncional en la cocina y reducir el desorden. Las líneas definidas, las esquinas redondeadas y los accesorios modernos crean una estética contemporánea que realza cualquier estilo de cocina.
  • DIMENSIONES EXTERIORES DEL LAVABO: 45" L x 19" A x 10 1/2" P – Dimensiones del receptáculo: 43" L x 16" A x 10" P – Tamaño mínimo del armario: 48 in
  • El KIT DEL CHEF DE 11-PIECE INCLUYE tabla de cortar de fibra de madera, tabla de servir con un bol para mezclar y un colador, escurridor de platos, escurridor de platos enrollable, alfombrilla de secado de silicona, rejillas inferiores protectoras (2) y conjunto de desagüe de acero inoxidable con cubierta desmontable. El lavabo listo para instalar viene con la tornillería y plantilla de corte incluidas.
  • ACERO INOXIDABLE CALIBRE TRU16™: Los lavabos tipo estación de trabajo de DELTA® están fabricados con acero calibre 16 altamente resistente para soportar las necesidades diarias y ofrecer larga durabilidad. El acabado SatinSheen™ resistente al desgaste es fácil de mantener y resiste el óxido, la corrosión y la decoloración.
  • El RECEPTÁCULO GRANDE ofrece amplio espacio para lavar objetos grandes, al tiempo que contiene el desorden y las salpicaduras dentro del lavabo, y facilita la transición entre tareas mientras prepara alimentos, cocina o se entretiene. Se instala BAJO ENCIMERA para ofrecer un aspecto prolijo sin que la cubierta de montaje quede expuesta. El desagüe desplazado hacia atrás ofrece más espacio de almacenamiento en el armario inferior.
  • La tecnología de AISLAMIENTO ACÚSTICO NOISEDEFEND™ con almohadillas insonorizantes extragruesas en todos los lados del lavabo reduce en gran medida el ruido y las vibraciones mientras el lavabo está en uso. El revestimiento inferior anticondensación previene la acumulación de humedad para reducir el riesgo de daños por agua en los armarios inferiores.
  • La TABLA DE CORTAR DE FIBRA DE MADERA se coloca sobre el lavabo para poder cortar y rebanar sin ocupar espacio en la encimera de la cocina. El JUEGO DE TABLA PARA SERVIR a juego viene con un bol grande de acero inoxidable y un colador para preparar ensaladas y colar pasta, con topes de silicona antideslizantes que evitan rayones.
  • El ESCURRIDOR DE PLATOS ENROLLABLE CON SOPORTE PARA UTENSILIOS, además de secar platos, protege la encimera de objetos calientes y cuenta con una ranura lateral extraancha para secar objetos grandes verticalmente. Tiene una estructura de acero inoxidable resistente. Es apto para lavavajillas, soporta temperaturas de hasta 400 °F y tiene capacidad para 85 lb. ALFOMBRILLA DE SILICONA con desagüe propio para secar cristalería y utensilios. ESCURRIDOR DE PLATOS DE ACERO INOXIDABLE para secar objetos y despejar las encimeras.
  • Las REJILLAS INFERIORES DE ACERO INOXIDABLE (2) mantienen los platos elevados para mejorar el desagüe y protegen la superficie del lavabo. Es apto para lavavajillas para facilitar su mantenimiento. El CONJUNTO DE DESAGÜE de acero inoxidable mantiene despejada la tubería de desagüe y evita obstrucciones. La cubierta de desagüe desmontable se ajusta a la abertura del desagüe y a la mayoría de los trituradores de basura, brinda un aspecto prolijo.
  • El LAVABO FÁCIL DE LIMPIAR tiene una superficie no porosa y esquinas redondeadas EZClean™ en la parte inferior del lavabo que evitan la acumulación de residuos con el tiempo. Las ranuras de desagüe canalizan el agua directamente hacia el desagüe y evitan que el agua se acumule en el lavabo. La pendiente optimizada evita que las copas frágiles se vuelquen. Certificaciones cUPC (ASME A112.19.3 CSA B45.4).
Documentos y especificaciones
Información de instalación
Configuración del receptáculo:
Un receptáculo
Tipo de montaje:
Montaje inferior
Forma del lavabo:
Rectangular
Cantidad de pilas:
1
Longitud total:
45
Ancho total:
19
Longitud del receptáculo:
43
Ancho del receptáculo:
16
Profundidad del receptáculo:
10
Tamaño mínimo del armario:
48
Desagüe incluido:
Abertura del desagüe:
3.88
Tornillería para el montaje incluida:
Calibre del lavabo:
16
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

RESEÑAS
Rated 3 out of 5 by from beautiful looking sink but very soft metal finish that scratches easily!
Date published: 2025-03-24
Rated 5 out of 5 by from Kitchen remodel Sink is perfect for this space.
Date published: 2025-02-23
Rated 5 out of 5 by from Great sink I love this sink so far. It’s large and accommodates my pots with long handles. Easy to clean. I like the accessories which allow me to get rid of my dish rack on my counter.
Date published: 2025-01-15
Rated 5 out of 5 by from Great sink! Great sink - large and very functional!
Date published: 2024-10-12
Rated 5 out of 5 by from Great look! What a beautiful sink. The accessories are great.
Date published: 2024-09-24
Rated 5 out of 5 by from Perfect sink A nice clean sink. It is easy to work in and easy to keep clean.
Date published: 2024-08-31
Rated 5 out of 5 by from Awesome Sweet looking functional sink.
Date published: 2024-07-15
Rated 5 out of 5 by from Well Designed Sink This is a beautiful, well-built sink that has great size, shape and functionality for our laundry room utility sink. The included accessories are great to have included. It was easy to install.
Date published: 2024-06-25
  • y_2025, m_4, d_1, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_47
  • loc_en_US, sid_95BA131-45S-SS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Preguntas y respuestas

2 Questions. Can you surface mount this sink? (Drop In)? My current sink is 43" elkay drop in. Want to replace it with this sink. My inside cabinet width is 43 1/2. What is the difference between Rivet & Lorelai finishes?

Asked by: Sandra
Hi Sandra, Thanks for reaching out to us. This sink is intended for an undermount installation and not intended to be installed as a drop-in / top mount sink. This sink also also requires a minimum cabinet size: 48" Left to Right, 24" Front to Back. Our Rivet and Lorelai sinks also offer the same finish, however, the radius of the corners in our Rivet Sink Collection are sharper. Rivet sinks offer an R0 radius in the vertical walls and an R5 radius in horizontal front and rear walls to aide in ease of cleaning and drainage. Hope this helps. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: MSINK
Date published: 2024-03-28

1) Can all of the accessories be placed on the top and bottom workflow ledges? 2) Can the accessories also sit at the bottom of the basin on the sink bottom/grid?

Asked by: Krysti
Thanks for your inquiry. The boards can be placed on the top ledge and when turned at a 90 degree angle can also fit on the bottom ledge. The grid will be the only accessory that sits on the bottom of sink.
Answered by: MSINK
Date published: 2024-03-28

purchased 95A9031-T30S-GS and would like to purchase additional accessory package but unable to find parts.

Asked by: gary
Hi gary, Thank you for your interest in our kitchen sink! Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com to let us know which accessories you would like to purchase for your sink.
Answered by: Customer Service
Date published: 2024-10-07

Are there any plans to add additional accessories to the Rivet? We are interested in a workstation sink that also has a built in colander as well. 

Asked by: Renovator
Hi Renovator, Thanks for reaching out. We will be introducing additional accessories, like Colanders, later this year.
Answered by: Customer Service
Date published: 2024-03-28

Can additional holes be cut for RO and soap dispensers?

Asked by: Tbone
Hi Tbone, Thank you for reaching out, I can answer your inquiry. The creation of additional holes is not recommended as it can potentially reduce the structural integrity of the sink. Please be aware however, that one accessory hole does already exist on the sink for dispensers and RO units. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31

Is this sink stamped out of one piece of stainless? As in, are there any seams that are welded or anything else? Thanks!

Asked by: Clint
Hi Clint, Thank you for reaching out, I can answer that for you. This model sink 95B931-30S-SS is hand made out of sheets of high quality stainless and welded together. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-03-14

What would be the difference between the Rivet and the Lorelai lines? I can only find that the plastic parts are black vs. grey and the board acacia vs. black dishwasher safe, is there anything i am missing?

Asked by: Alex
Thanks for reaching out to us. Yes, although both sink series look similar, there are some differences. The Rivet Collection offers R0 corner radius and the Lorelai offers R10 (for inner bowl) . The drain placement is also different with many of the Lorelai sinks having offset drains on the right-hand side of the sink and the Rivet series offering center rear drains. Please contact us directly by phone at 1-800-345-3358 or email at customerservice@deltafaucet.com with any additional questions.
Answered by: Mike
Date published: 2024-03-28

Will a positive reveal create dual tiers?

Asked by: MaryBski
Hi Mary, Thank you for your interest in our kitchen sink! I can answer that for you. This model sink 95B931-30S-SS is a single tier workstation sink and you cannot create an additional tier that is compatible with our workstation accessories. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31

Il est clairement dit que les rebords du fond ont un rayon facilitant le nettoyage (Ezclean), mais qu'en est-il des rebords des arêtes des côtés de la cuve ?

Asked by: Missmath

Do you have a dxf file to cut this sink for CNC machine?

Asked by: khowell
Hi Howell, That is a great question and I can help you with that. We do have DXF file available for CNC machines, we can email them to you. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can send you the file you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Hi, Is there any way to buy replacement or additional workstation sink accessories? (i.e. a 2nd cutting board, or the collander/bowl or dishrack that comes with larger sinks)

Asked by: Angela
Hi Angela, Thank you for reaching out, we can certainly assist you with that! Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with getting the accessories you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Regarding the 33" sink, what is the height of the front apron? I'm asking to determine clearance relative to the sink cabinet doors.

Asked by: Tom314
Hi Tom314, The apron is 9" in height.
Answered by: Customer Service
Date published: 2024-03-28

I'm lolling looking for a workstation sink to replace my current sink. The cutout in the granite is 30" wide X 17" deep. Is there a sink that will fit this opening?

Asked by: Jdkitch
Hi Jdkitch, Thank you for your interest in our kitchen sink! We cannot recommend a sink based off of the pre-existing cutout dimensions alone. This is due to each sink requiring its own specific cutout and the radius of the corners is a vital component which needs to be taken into account. This is why typically when replacing a sink, you also have to modify the countertop as well. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-11-28

What is radius in all corners of the sink? The description reads like only the horizontal corners in bottom of the bowl are rounded while the vertical ones may be zero radius.

Asked by: JordanS
Hi JordanS, Thanks for reaching out to us! Our Workstation sinks offer an R0 radius in the vertical walls allows for all 90 degree angles at the ledge and vertical weld points and an R5 radius in the horizontal front and rear walls to aid in ease of cleaning and drainage.
Answered by: Customer Service
Date published: 2024-03-28

Drain cut out placement  on your RUVATI 33" X 32" is how many inches from the rear wall of the sink?

Asked by: George

The description says that the Rivet sink has rounded corners that are easy to clean, but the image shows quite square corners. Which is it?

Asked by: SarahG

need a dxf file for MODEL#: 95B9031-30S-GS Rivet 16 Gauge Black Stainless Steel 30 in. Single Bowl Undermount Workstation Kitchen Sink in PVD Gunmetal Finish

Asked by: Swamper
Hi Swamper, We can help you with that, Please feel free to email at sinksupport@deltafaucet.com so we can provide you with that DXF file you are looking for.
Answered by: Customer Service
Date published: 2024-01-31

Is there a knockout for a soap dispenser on this sink? It looks like it in the pics but I can't find anywhere where it says it specifically.

Asked by: Alex1234
Hi Alex, Thank you for your interest in our kitchen sink! I can answer that for you. This model sink 95A931-33S-SS does has an accessory hole for dispenser and other accessories alike, it comes with a cover in case you do not wish to use it. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-01-31

Is a hole plug included if you only want to use center faucet hole and not accessory hole?

Asked by: KenzieMom

My countertop manufacturer communicated to me that this sink requires a 1/4” radi for the sink cutout.  Is this accurate?  Please advise.

Asked by: Mila
Hi Mila, That is a great question and I can answer that for you! You can see the exact cutout dimensions on the last page in the document in the link below: https://media.deltafaucet.com/MandI/95B931-30S-SS-IMs%20&%20cutout.pdf Please feel free to contact us directly by phone at 1-800-345-3358 with any additional questions.
Answered by: Customer Service
Date published: 2024-02-13

Kitchen will have 2 sinks & I am considering using all Rivets: 45-inch and 23-inch undermounts. Will 45-inch's "kitchen serving board" (that holds bowl/colander) fit inside the 23-inch sink? Can you buy extra accessories?

Asked by: LawyerMama
Thanks for reaching out to us. Yes, the accessories included with our 45" sink will also work well with our 23" sink.
Answered by: MSINK
Date published: 2024-03-28

What is the difference between the 32" Lorelai and the 32" Rivet, other than the drain placement?

Asked by: Myke 1
Hello Myke 1! Thank you for your question and we are happy to help. The difference is the choice in finish that is available of each along with the drain placement. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie
Answered by: Customer Service
Date published: 2024-03-28

what type of stainless steel is this? SS304? SS210? or SS410? Does it have a rounded radius inside corners? Please provide closeup picture if possible on the inside radius. Are the connections micro welded?

Asked by: Louis
Thanks for reaching out. Our stainless steel sinks are made of T304 steel. Our Workstation sinks offer an R0 radius in the vertical walls allows for all 90 degree angles at the ledge and vertical weld points and an R5 radius in the horizontal front and rear walls to aid in ease of cleaning and drainage. We would also be happy to answer any additional questions you would have. Please contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com
Answered by: MSINK
Date published: 2024-03-28

What grade of stainless steel is this made from? Is it 304?

Asked by: kitchenrenovator
Hi kitchenrenovator, Yes, this sink is constructed out of premium T304 stainless steel.
Answered by: Customer Service
Date published: 2024-03-28

How deep is this sink?

Asked by: GoToGirl425
Hello, Thank you for your interest in our kitchen sink! I can answer that for you. The 95A931-33D-SS is 9 inches deep. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-10-01

I like everything about the Rivet except the black cutting board. Is it possible to get the wood cutting board like the one for the Lorelai instead?

Asked by: CanaLau
Hi CanaLau, Thank you for your purchase of our Kitchen sink! we can assist you with that. You can purchase another cutting board like the model ABU24-VWCB-AC from us directly. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com so we can assist you with getting the cutting board you are looking for.
Answered by: Customer Service
Date published: 2023-11-28

How do you clean the Rivet sink? What products do we use. I have a mark that came on the sink out of the box and I'm trying to figure out what I can use to try and clean it

Asked by: SCastillo
Hi SCastillo, Thanks for reaching out to us. For a thorough cleaning, use water and a mild liquid soap detergent (ammonia-free). Apply the cleaner with a soft sponge, then rinse with lukewarm water and pat dry with a microfiber cleaning cloth. Polishing your sink weekly will help to retain the luster of the stainless steel. Products to consider include: Barkeepers Friend, Weimann Stainless Steel Cleaner, Howard Naturals Stainless Cleaner. We also recommend avoiding cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine. These products may damage the sink surface.
Answered by: Customer Service
Date published: 2024-03-28

Regarding MODEL#: 95B9031-24SL-SS and 95B9031-32SL-SS: Where are these sinks manufactured? Or what is the country of origin?

Asked by: Karen52
Hi Karen52, Thank you for your interest in our kitchen sinks! We source best-in-class components and materials from around the world and assemble our products in factories throughout Europe and Asia. No matter where in the world our products are sourced, manufactured and assembled, you can be assured that every piece is built with utmost care to exacting DFC specification, as well as conforming to all relevant State and Federal codes. These model sinks are assembled in China. Rigorous quality testing, performed by our Quality Control inspectors, ensures a long-lasting lifetime of service. The location information on the back of the box will tell you which global DFC manufacturing location your product was made in. Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-03-28

What grade stainless steel is this sink?

Asked by: wrenkitchen2

Other than the accessories that are already included with the Delta Rivet model# 95B931-32S-SS workstation, are there any additional accessories that can be purchased? I would like a colander to drain pasta & wash vegetables.

Asked by: Alice
Hi Alice, Thank you for your interest in our kitchen sink! I can answer that for you. Unfortunately, we do not manufacture a colander you can purchase separately. However, our sister company, Kraus, manufactures a compatible colander, model CS-6, which will fit in the sink: https://www.kraususa.com/kraus-stainless-steel-colander-for-workstation-kitchen-sink.html Please feel free to contact us directly by phone at 1-800-345-3358 or email at sinksupport@deltafaucet.com with any additional questions.
Answered by: Customer Service
Date published: 2024-09-26
  • y_2025, m_4, d_1, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_82
  • loc_en_US, sid_95BA131-45S-SS, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 43ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.