Delta®

Enjuagadora de vasos en cromado

N.º de modelo: GR150
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Enjuagadora de vasos en cromado
N.º de modelo: GR150
Precio de lista: $17440
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
La enjuagadora de vasos de Delta® enjuaga por completo los residuos en cuestión de segundos con chorros de agua a una presión alta que llegan adonde usted no alcanza. Desde biberones hasta copas de vino o vasos de viaje, enjuaga cualquier recipiente de manera práctica para que usted pueda dedicar menos tiempo a poner en remojo y fregar. Su diseño elegante y discreto combina con cualquier llave y se puede instalar fácilmente en un orificio de encimera vacío, como los que se usan para los dispensadores de jabón y los rociadores de lavabo. Incorpore la potencia de la practicidad en su cocina con la enjuagadora de vasos de Delta.
  • Reemplazo sencillo que puede hacer usted mismo para una cubierta de orificio de lavabo, rociador de lavabo o dispensador de jabón.
  • Puede enjuagar la mayoría de los recipientes estándar, entre ellos, copas de vino, biberones y vasos de viaje.
  • El tamaño mínimo de la abertura del recipiente es de 1" de diámetro y el tamaño máximo de la abertura del recipiente es de 3.6" de diámetro.
  • Incluye accesorio de cubierta para evitar las salpicaduras accidentales.
  • Incluye adaptador en T para facilitar la instalación.
  • El diseño elegante y de bajo perfil permite que la enjuagadora de vasos de Delta® combine a la perfección con cualquier llave en cualquier estilo de habitación.
  • Se instala en un orificio de encimera/lavabo estándar.
  • Puede conectarse a la línea de suministro de agua fría o caliente.
  • Combina con la mayoría de las marcas de llaves para cocina.
  • Llega adonde usted no alcanza.
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Technology and Special Features
Libres de plomo
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Ver diagrama de repuestos y accesorios
Registrar su producto
Información de instalación
Instalación con un solo orificio
Instalación con un solo orificio
Overall Height (in.) :
1 1/2
Voltaje:
0
Caudal:
1.2 gpm a 60 psi, 4.5 l/min. a 414 kPa
Tipo de válvula:
NA

SOPORTE PARA LA INSTALACIÓN

¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.

IR
Escriba un código postal válido.
Mike y Hanna
Miniatura del logotipo de Delta

¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.

Explorar videos
LISTA DE PIEZAS

LISTA DE PIEZAS

Discontinuado
Discontinuado
Image-RP101284
Discontinuado

DELTA

DELTA Conector en T

Precio de lista: $23.05
Acabados estándar

RP101284

Image-RP101283

DELTA

DELTA Manguera

Precio de lista: $39.15
Precio en línea: $31.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP101283

Image-RP101282

DELTA

DELTA Tuerca de montaje

Precio de lista: $11.50
Precio en línea: $9.20
Free Ground Shipping All Orders $49+
Acabados estándar

RP101282

Image-RP101278

DELTA

DELTA Brazos de accionamiento

Precio de lista: $12.70
Precio en línea: $10.16
Free Ground Shipping All Orders $49+
Acabados estándar

RP101278

Image-RP101277

DELTA

DELTA Cubierta

Precio de lista: $21.35
Precio en línea: $17.08
Free Ground Shipping All Orders $49+
Acabados estándar

RP101277

Image-RP101279

DELTA

DELTA Arandela de soporte

Precio de lista: $12.10
Precio en línea: $9.68
Free Ground Shipping All Orders $49+
Acabados estándar

RP101279

Image-RP101281

DELTA

DELTA Junta de espuma

Precio de lista: $10.40
Precio en línea: $8.32
Free Ground Shipping All Orders $49+
Acabados estándar

RP101281

Image-RP101280

DELTA

DELTA Espaciador

Precio de lista: $12.70
Precio en línea: $10.16
Free Ground Shipping All Orders $49+
Acabados estándar

RP101280

Image-Master-RP101289

DELTA

DELTA Cubierta de enjuagadora de vasos

Precio de lista: $28.40 - $49.60
Free Ground Shipping All Orders $49+
Acabados estándar

RP101289

RESEÑAS
Rated 5 out of 5 by from Glass rinser. Amazing addition accesory to our kitchen.
Date published: 2024-05-01
Rated 4 out of 5 by from Draw back I bought this primarily to wash out our shake/smoothie cups. I didn't think about measuring since one of the images shows someone washing one. I recommend you measure the largest glass you anticipate washing to ensure the fit. Disappointed Delta doesn't offer in a larger size, but love the concept.
Date published: 2022-08-08
Rated 3 out of 5 by from Excellent idea. Given kepople’s review, I won’t be purchasing because it doesn’t accommodate any coffee cups I have. Never thought to measure the diameter of a coffee cup but then I didn’t design a fixture to rinse cups and glasses.
Date published: 2022-06-17
Rated 3 out of 5 by from Make a bigger one... It works, but won't fit most coffee cups which is what I would use it for 90% of the time. Make a larger base for it!
Date published: 2021-07-18
Rated 5 out of 5 by from Can’t say enough good things I absolutely love this rinser... not just for glasses, but for my coffee thermos, coffee cup, cans for recycle, smoothie mixer cup....all kinds of things that tend to have things harden on as they dry. I use it with a tiny bit of soap to actually wash items and also to quickly rinse others I still plan to put through the dishwasher. You’ll never realize howmuch you appreciate this invention until you have one.
Date published: 2021-04-15
Rated 4 out of 5 by from Great concept some design flaws I was so excited for this item! We often have residue in the bottom of glasses (leave wine in bottom of glass and it dries, smoothie making, etc). This thing does exactly as it promises-it rinses all the gunk out that a dishwasher really can’t. It gets all our water bottles the cleanest they’ve ever been. In a pinch for time, I’ll add a squirt of soap to a cup then place it on this and they’re clean as new! My biggest disappointment in this is the size. It needs to be about 1/4 inch wider in diameter. I mainly bought this to rinse my smoothie cups and they don’t fit in the base. Our coffee cups are also just a tiny bit too wide to fit. I’m mad at myself for not measuring these items before purchasing as coffee mug residue and smoothie cups were my main motivation for purchasing this. I think those with bottle fed babies would find this invaluable! I recommend, just make sure it’s work with your cups! It also really pours neatly into the sink, no splashes at all! We installed it easy and without issue.
Date published: 2020-10-19
Rated 2 out of 5 by from Excellent idea, poor quality and execution. This is advertised as "Spotsheild Stainless Steel" but upon unboxing, it turned out to be cheap looking plastic. To make things worse, the color ISN'T STAINLESS STEEL. Instead, it has a brushed nickel huge. This item is a great idea and it would look amazing if it were actual stainless steel that matched my Delta stainless steel sink and faucet. I wish they would make a 2.0 version that improves on quality of the materials.
Date published: 2020-05-10
Rated 1 out of 5 by from Amazing idea horribly executed As a former bar tender I was elated to see this for the home but when it arrived I found the ENTIRE BASE is made of plastic. Really? $100 on Amazon or $165 on Delta's website for a "chrome finish" or "stainless steel finish" base that is made of plastic and doesn't match the metal faucet or sink it's directly next to. If this base matched the fixtures it was near this would be absolutely amazing and become a kitchen staple, but as-is this stands out like an eyesore and looks super cheap. I'm returning mine and buying an actual bar use unit from a supplier.
Date published: 2020-03-24
  • y_2024, m_12, d_3, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_GR150, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 4ms
  • reviews, product
Preguntas y respuestas

Will this only work with an under mount sink, or can this be fitted in a drop-in as well?

Asked by: Eric
Thank you for your question, Eric! Model GR150 can be installed on a drop-in sink. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Hello, are there plans to make an oil rubbed bronze version of the glass rinser? 

Asked by: Taylor F
Hi Taylor F! Thank you for your question. At this time, the Delta GR150 Glass Rinser is only available in the Chrome and SpotShield Stainless Finishes. Please check back frequently for other finishes we may add in the future. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

When is the Delta glass rinser available  ??

Asked by: Bobby
Hi, Bobby! Thank you for your question. The Delta GR150 Glass Rinser will be available Quarter 4 of 2019. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What installation changes are required in order to install this with a drop in sink? The installation guide only shows with an under mount sink.

Asked by: Simon
Thank you for your question, Simon. The installation will be the same for a drop-in sink as it would for an under-mount sink. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there any soap involved or just a water rinse?

Asked by: Carman
Thank you for your question, Carman! There is no soap involved with model GR150-SP. It is a water rinse. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

Is it possible to custom order this in a matte black?

Asked by: FAITH
Thank you for your question, FAITH! Unfortunately the Delta Glass Rinser is not offered in the Matte Black finish currently, nor is it available for a custom order. We are always looking to expand our finish options; however, and will keep this suggestion in mind for the future. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

What size hole should be drilled to fit this? 

Asked by: Thhv
I am also wondering if a 0.82" (21mm per the sheet) hole has to be drilled or what exact measurement of the hole on my quartz countertop? I plan to install this on a under mounted sink (my sink has a countertop sitting on it).
Answered by: SamV
Date published: 2024-03-28

Does this work if the center of my countertop hole is 2.5” away from the edge?

Asked by: Ethel
Hi, Ethel! Thank you for your question. We do advise the Delta GR150-SP Glass Rinser to be as close to the sink as possible. This is to make sure the water drains out into the sink when using the rinser. We do apologize for any inconvenience this may cause. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Is this product available in stores now? We are renovating a home bar and would like to add this product.

Asked by: Nathan
Hi, Nathan! Thank you for your question. The Delta GR150-SP Glass Rinser is available at any dealer that sells Delta faucets. Some good places to check can be found on our website under Where To Buy. http://www.deltafaucet.com/where-to-buy/index.html This will show where Delta Faucet Products are sold, not where the specific product is available. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Will you have this in champagne bronze 

Asked by: Naomi
Hi, Naomi! Thank you for your question. The Delta GR150 Glass Rinser in the Champagne Bronze Finish will be available quarter 2 of 2020. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Any plans on offering this in a matte black finish? 

Asked by: John
Hi, John! Thank you for your question. At this time, the Delta GR150 Glass Rinser is only available in Chrome and SpotShield Stainless. We are always trying to update and add other finishes for our Delta Faucet products. Please check back often for updates for this unit. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Can the sprayer line be connected to this renser?

Asked by: rrman
Thank you for your question, rrman! the GR150-SP Glass Rinser is only designed to be installed as instructed in the Maintenance and Installation manual. https://media.deltafaucet.com/MandI/106363%20Rev%20A.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Will this work for sinks mounted above counter or only for under mounted sinks?

Asked by: Jessica
Thank you for your question, Jessica! The Delta Glass Rinser should work on most standard countertops as well as undermounts and drop-ins provided the sink hole placements allow for the unit to reach over the sink. There are also optional spacer for sinks with raised ledges included. This will not work for vessel sinks unless there is a ledge for the unit to be mounted on. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Can this be used in place of a faucet? Say for a wet bar sink?

Asked by: Kate
Thank you for your question, Kate! The GR150-SP Delta Glass Rinser can be used instead of a faucet; however, this is not designed to be used as a faucet. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Will this be made in a antique bronze?

Asked by: Sean
Hi, Sean! Thank you for your question. At this time, the Delta GR150-SP Glass Rinser is only available in the Chrome and SpotShield Stainless Finishes. Please check back frequently for other finishes we may add in the future. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

Does the delta glass tinder come with the brush attachment to help remove lipstick etc from glass rims?  I see the brush feature in the trade show videos

Asked by: Steviegene
Comment said "A Delta GR150-SP glass rinser includes the brush attachment." - mine did not include a brush.
Answered by: Adam
Date published: 2024-03-28

What is the difference between the GR150 and GR250 glass rinser models?

Asked by: Jason B
Hi Jason B, Thank you for your question regarding our Delta Faucet GR150. The GR150 is nonmetallic and the GR250 is metal. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-01-31

The inside black piece that releases the water and the arms broke on our tinder. Do you sell replacement pieces?

Asked by: Nicolep
Hi Nicolep, Thanks so much for contacting Delta Faucet Company! I have included a link below to the GR150 parts diagram, these parts can be found locally or online. https://media.deltafaucet.com/PartsDiagram/DPD-K-GR150.pdf Please contact us directly if you have any questions or need additional assistance. Best Regards, Nicole Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

Is there a minimum depth that is required from the edge of the sink/counter to the backsplash/wall. I have only 3 inches between the two which would require that the glass rinser overhang quite a bit.

Asked by: Patty
Hello Patty, Thank you for your question! We apologize for the inconvenience you are experiencing and will be happy to help you. For specific instructions for installing the Delta Glass Rinser, please refer to the maintenance and installation guide. I have attached the link below. https://media.deltafaucet.com/MandI/106363%20Rev%20C.pdf Please feel free to contact us back for further assistance. Best Regards, Kelley
Answered by: Kelley
Date published: 2024-03-28

Hello - I was about to purchase the Spotshield Stainless Glass Rinser, but after seeing all of the negative reviews regarding it being plastic, will you be releasing a better metal version? I'm building a new bar and want it to look right and last.

Asked by: cycling101
Thank you for your question, cycling101! We are planning on introducing model G250, which has a metallic base. As of this writing, we are planning on launching this product during the 2nd quarter of 2020. Please know this information is subject to change. Best Regards, Benjamin
Answered by: Benjamin
Date published: 2024-03-28

Hi On this cup rinser, what would be the size required for the hole to be drilled on countertop?

Asked by: Daniela
Hi Valued Customer, Thank you for your question regarding our Delta Faucet GR150. Please refer to the specification sheet in the link below. https://media.deltafaucet.com/SpecSheet/DSP-K-GR150%20Rev%20B.pdf Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
Answered by: Customer Service
Date published: 2024-02-12

How would I go about installing the rinser if I already have a 2 way hot water valve that is connected to my sink and dishwasher? Will the cold water supply line work as well as the hot would?

Asked by: DejB
Hello Customer, Thank you for your question. I am happy to assist you. This model can be connected to either the hot or the cold water supply line. Please contact us back via email with any further questions. Best Regards, Skyler Phone: (800) 345-3358 | Email: customerservice@deltafaucet.com
Answered by: Delta7
Date published: 2024-03-28

Is this still the same product as it was a year ago? Is it still plastic or is it now stainless steel?  What Is the maximum diameter for a container? 

Asked by: Grama in MO
Hello Grama in MO, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet Glass Rinser In Chrome MODEL#: GR150 is non-metallic and has a minimum drinkware opening size of 1 in. diameter and a maximum drinkware opening size of 3.6. in diameter. Thank you for being a loyal Delta Faucet customer. Please contact us back with any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

What country are these made?

Asked by: HDri
Hi HDri, Thank you for your question regarding our Delta Faucet Delta Glass Rinser In Chrome MODEL#: GR150. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible. As a global manufacturer, we source and assemble several parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. We're proud to manufacture most of our products at our plants in Jackson TN, Morgantown KY, Lapeer MI, and Greensburg, IN. The location information on the back of the box will tell you where each specific model was made. Thank you for being a loyal Delta Faucet customer. Please feel free to call, email, or message us on social if you need anything else. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

What would you recommend for trouble shooting a low flow issue?

Asked by: AshleyAnne

My sink and fixture are flush mounted, NO holes. Would the glass rinser be able to be used? thanks

Asked by: paul
Hello Paul, Thank you for your question about the Delta Faucet model GR150 glass rinser. I apologize for any difficulty finding this information. We are happy to help! This product is designed to be installed in a standard countertop/sink hole. It would need a hole for the shank of the glass rinser. Please see the installation instructions for more information. https://media.deltafaucet.com/MandI/106363%20Rev%20C.pdf Please reach out directly at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. Best regards, Bryan
Answered by: Delta Faucet
Date published: 2024-03-28

can we have the manufacturing company details for sink galss washers ?

Asked by: AMG22
Hi AMG22, Thank you for your question about the Delta Faucet model GR150. I am sorry this information was not readily available, and I am happy to help! As a global manufacturer, we source and assemble a number of parts around the world. No matter where in the world our products are sourced, manufactured, or assembled, they are built to Delta Faucet Company's exacting specifications and are quality tested to ensure long-lasting performance. The location information on the back of the box will tell you where your specific model was made. Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

It is said that the hole has to be at most 2 1/4" from the sink. Are we talking about the edge of the hole or center of hole? Mine is 2 1/2 from center of hole. Would it still be ok?

Asked by: Pascal
Hi Pascal, thank you for your interest in the GR150! The Rinser cannot be installed any more than 2 1/4 from the installation hole. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-03-19

Do you sell an attachment lip for it I had it installed and the lip does not tease into the sink and so all the water leaks on countertops

Asked by: JanA
Hello JanA, Thank you for contacting Delta Faucet Company! I am sorry this information was not readily available, and I am happy to help you! Our Delta Faucet DELTA® Glass Rinser MODEL#: GR150 base is only available in one design, I apologize for any inconvenience this may cause. Thank you for being a loyal Delta customer. Please contact us back for any further questions. Best Regards, Nicole
Answered by: Delta7
Date published: 2024-03-28

Is there a longer shank that can be purchased? Countertop & supporting brace are deeper than the current shank. If not available, what is the size of the pipe & thread to find an alternate solution?

Asked by: MSnyder
Hi MSnyder, Thanks so much for contacting Delta Faucet Company! Unfortunately there is not a longer mounting shank available. The shank is 13/16" in diameter. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
Answered by: Customer Service
Date published: 2023-02-27
  • y_2024, m_12, d_3, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_62
  • loc_en_US, sid_GR150, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 33ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.