Delta®

Wall Elbow for Hand Shower in Lumicoat® Chrome

N.º de modelo: 50560-PR
IMPRIMIR
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Wall Elbow for Hand Shower in Lumicoat® Chrome
N.º de modelo: 50560-PR
Precio de lista: $8400
IMPRIMIR
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Prepararse en la mañana no es un acto de rutina cuando está rodeado por un baño que refleja su estilo personal. Personalice su experiencia con duchas manuales, rociadores para el cuerpo, chorros para el cuerpo y regaderas tipo lluvia. Nuestros productos de Delta® están especialmente diseñados para que su instalación sea simple y mejorar su uso diario en todo momento. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que las duchas de Delta están respaldadas por nuestra garantía limitada de por vida.
  • Los acabados Lumicoat® se limpian sin sustancias químicas o limpiadores, y está garantizado que resisten la acumulación de minerales y las marcas de agua en las áreas que más se tocan del producto.
  • Codo de pared de 90 grados para ducha manual
  • Puede usarse con duchas manuales de Delta (se venden por separado).
  • Se puede utilizar como recambio o para instalaciones en construcciones nuevas
  • Recambio de RP32549 y RP3913
  • Se coloca en la superficie de la pared.
  • Se vende por separado
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Registrar su producto
Información de instalación
Altura total:
2 3/8
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of 5 by from Quick delivery I haven’t installed yet. But it looks beautiful and very well made. It was delivered 24 hours after I bought it. I couldn’t believe how quickly it came. Very happy with my purchase so far.
Date published: 2024-05-06
Rated 1 out of 5 by from Not recommended This was Not an easy install. Like shower head but that’s it
Date published: 2024-03-08
Rated 5 out of 5 by from Delta, why is this piece not part of the trim kit? I could not believe that the trim kit for my shower did not come with this piece. But, I found it on the website, it was here in a day or two, and the job was completed.
Date published: 2024-02-25
Rated 2 out of 5 by from Not a good design, if leaks matter. I bought this wall elbow (#50560) a few years ago and finally am redoing the shower. It looks nice but I would NOT recommend one because unless you can cut our own ½” nipples to EXACTLY the right THREADED length you’ll have to wonder if there’s a leak in the wall, which you won’t know for sure until the tiles start falling off and the studs begin to rot. The instructions say the nipple should stick out from the finished wall no more than ½” and no less than ¼”. Mine was right at ½”, but it was too short—the threads weren’t very tight and the plastic gasket that should seal against the wall wasn’t very tight. Another full turn would be another 1/14” tighter, which wasn’t possible. I might have got another ½ turn. There’s no give in the porcelain tile and cement backer board. I figured if the threaded length of my nipple were 1/20” longer it may have worked. I phoned Delta but the woman could offer no help. How do they expect these to work? If you could access the pipe in the wall from behind it might work, but I’d have to punch a hole through the stucco exterior of my house. I may buy a Kohler 22174-CP elbow, which doesn’t have the same problem—you tighten the pipe (and feel confident it is leak-proof), then press the wall plate against the wall with silicon sealant behind it. Not quite the same look, but better than a possible leak in the wall! The photo shows a 2" brass nipple. I wound up using a 2" galvanized nipple, which was a little tighter, but not tight enough to keep me from worrying about leaks.
Date published: 2024-02-07
Rated 5 out of 5 by from homeowner got this for the hand held shower head & diverter that we got for an upgraded shower we installed, was worth it.
Date published: 2023-11-13
Rated 5 out of 5 by from Delta shower system for remodel is great! Works great and good quality
Date published: 2023-08-26
Rated 5 out of 5 by from Happy Delta is a great and affordable
Date published: 2023-08-15
Rated 4 out of 5 by from Nice utility sink Nice capacity. The rubber mat prevents scratching the sink bottom. This is consumer grade, so don't expect the scratch resistance of commercial grade. Use the rubber mat!!
Date published: 2023-08-13
  • y_2024, m_7, d_7, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_70
  • loc_en_US, sid_50560-PR, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

My contractor installed the supply elbow with the outlet facing up. Can this be adjusted so it faces down? 

Asked by: Jaypro
Thank you for your review, Jaypro! The wall elbow threads on to a 1/2" (13 mm) iron pipe nipple. This can be unscrewed and threaded on correctly, but please be sure to apply plumbers tape to the pipe thread as per the instructions. https://media.deltafaucet.com/MandI/43934RevC.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

What is this product made of? Plastic?

Also what is the shower bar on the model 57021 made out of? Assuming it's NOT brass?
Asked by: Monika
Thank you for your question. Per the spec sheet (link provided below), the Delta Faucet model #50560 is a solid brass construction. http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: Delta
Date published: 2024-03-28

Customer wants us to install a diverter and elbow (50560) but wants a cap for the elbow. They do not want a wand at this time but later.

Asked by: SueE
Thank you for your question, SueE! Unfortunately we do not manufacture a cap for this elbow however this model does include a thread-on tool that can be left on as a plasterguard if needed. We would not recommended capping this area to control water flow as the main control valve will do this. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a part number for the plastic gasket?

Asked by: gr5409
Thank you for your question, gr5409! There are no separate repair part numbers for this wall elbow. Please contact us directly if you have questions or need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

My plumber installed a piece of copper pipe attached to pex.  At the top of the copper pipe he installed an elbow 90 degree 1/2 inch copper fitting with tapered threads.  Should the tapered thread copper fitting work and seal properly with teflon tape?

Asked by: Russ
Hi, Russ! Thank you for your question. The Delta 50560-SS Wall Elbow will fit on 1/2" copper fittings with standard threads. We recommend the standard threads be sealed properly with plumber's tape. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How far away from the corner should it be to allow enough room to rotate in installation?

Asked by: Doug
Hi Doug, Thank you for your question! You will need to take the length of the entire wall bow in consideration to determine where is needs to be mounted on your wall set up. Below is a link to the technical specifications for the 50560: http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

My son recently installed this for a hand shower as part of a complete bathroom remodel. As instructed, he used a 1/2" IRON pipe nipple. Now dirty rusty h2o blasts into my new tub every time used! Why iron? Thanks alot...

Asked by: ChuckB
So hopefully you used a galvanized steel nipple or brass nipple not a black iron nipple which over time will rust and rot and leak. You just need 1/2 MIP thread. 
Answered by: Plumbbum
Date published: 2023-11-04

I need technical drawings for plumbing connections

Asked by: Richard
Hi Richard, Thank you for your question regarding the Delta Wall Elbow for Hand Shower 50560 model. Please see the below technical specifications for this model. Please feel free to call, email, or message us on social. https://media.deltafaucet.com/SpecSheet/dsp-b-50560_A.pdf Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2024, m_7, d_6, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_50560-PR, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 11ms
  • questions, product

BUNDLES FEATURING THIS PRODUCT

Image-Master-FVS6-SA2101

SAYLOR™

SAYLOR™ Saylor 3-Setting Custom Shower Bundle - 14 Series

Precio de lista: $920.45 - $1,307.80
Acabados estándar

FVS6-SA2101

Image-Master-FVS6-TR211

Trinsic®

Trinsic® Trinsic 3-Setting Custom Shower Bundle

Precio de lista: $995.15 - $1,374.20
Acabados estándar

FVS6-TR211

* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.