Delta®

Codo de pared para ducha manual en Venetian Bronze

N.º de modelo: 50560-RB
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Codo de pared para ducha manual en Venetian Bronze
N.º de modelo: 50560-RB
Precio de lista: $116.85
Precio en línea: $90.36
Free Ground Shipping All Orders $49+

Este artículo está agotado en DeltaFaucet.com

Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
La ducha se convierte en su refugio privado, donde los rociadores para el cuerpo y las regaderas funcionan en perfecta armonía. Prepararse en la mañana no es un acto de rutina cuando está rodeado por un baño que refleja su estilo personal. Personalice su experiencia con duchas manuales, rociadores para el cuerpo, chorros para el cuerpo y regaderas tipo lluvia. Usted puede realizar la instalación con confianza, ya que tendrá la tranquilidad de saber que Delta respalda esta barra deslizante ajustable con una garantía limitada de por vida.
  • Codo de pared de 90 grados
  • Suministro de pared para ducha personal
  • Se puede utilizar como recambio o para instalaciones en construcciones nuevas
  • Recambio RP32549 y RP3913
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Ver especificaciones técnicas
Ver hoja de mantenimiento e instalación
Registrar su producto
Información de instalación
Overall Height (in.) :
2 3/8
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of 5 by from Did the trick Quality product.
Date published: 2011-11-29
Rated 5 out of 5 by from Great look Easy install, looks great with other fixtures,
Date published: 2011-07-22
Rated 5 out of 5 by from Great look I was sceptical about this product. It seemed a bit overpriced for the job it did. It makes a huge difference in the look of the shower, makes a nice clean overall look. I would use it again
Date published: 2011-07-21
Rated 5 out of 5 by from Accessories in oil ruubed bronze It is really nice to have all the necessary accessories in oil ruubed bronze complete the look of the fixture in the same color Delta is a excellent product - works well looks great!
Date published: 2011-06-15
Rated 5 out of 5 by from good product excellent product for our needs. shiny chrome finish which matched the rest of our shower trims.
Date published: 2011-04-19
Rated 5 out of 5 by from wall supply This is a cool piece, heavy, solid, low profile and sharp looking. I used flex for the hook-up so I had to improvise with a brass nipple, washer and the nut from a 3/8 inch electrical connector to secure to the shower wall.
Date published: 2010-12-07
Rated 4 out of 5 by from Good Quality Product Well constructed heavy duty product but installation was a bit diffcult trying to keep the plastic seal in place as the connection was tightened. Has worked great since installed
Date published: 2010-05-30
Rated 5 out of 5 by from Nice piece of hardware This piece is a nice piece of hardware. It is bigger than you would think and heavy. Can't wait to see it installed.
Date published: 2009-12-08
Rated 5 out of 5 by from Delta 50560-RB (Accessory): Wall Supply Elbow Great flat-to-flush wall mounting of Hand held Shower with Hose and Slide Bar
Date published: 2009-12-01
Rated 5 out of 5 by from Perfect! My contractor recommended this part for my shower bar. It looks great! Mahalo
Date published: 2008-07-16
  • y_2025, m_5, d_3, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_4, bvpage2n
  • co_hasreviews, tv_0, tr_78
  • loc_en_US, sid_50560-RB, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

My contractor installed the supply elbow with the outlet facing up. Can this be adjusted so it faces down? 

Asked by: Jaypro
Thank you for your review, Jaypro! The wall elbow threads on to a 1/2" (13 mm) iron pipe nipple. This can be unscrewed and threaded on correctly, but please be sure to apply plumbers tape to the pipe thread as per the instructions. https://media.deltafaucet.com/MandI/43934RevC.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

What is this product made of? Plastic?

Also what is the shower bar on the model 57021 made out of? Assuming it's NOT brass?
Asked by: Monika
Thank you for your question. Per the spec sheet (link provided below), the Delta Faucet model #50560 is a solid brass construction. http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper
Answered by: Delta
Date published: 2024-03-28

Customer wants us to install a diverter and elbow (50560) but wants a cap for the elbow. They do not want a wand at this time but later.

Asked by: SueE
Thank you for your question, SueE! Unfortunately we do not manufacture a cap for this elbow however this model does include a thread-on tool that can be left on as a plasterguard if needed. We would not recommended capping this area to control water flow as the main control valve will do this. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is there a part number for the plastic gasket?

Asked by: gr5409
Thank you for your question, gr5409! There are no separate repair part numbers for this wall elbow. Please contact us directly if you have questions or need further assistance. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

My plumber installed a piece of copper pipe attached to pex.  At the top of the copper pipe he installed an elbow 90 degree 1/2 inch copper fitting with tapered threads.  Should the tapered thread copper fitting work and seal properly with teflon tape?

Asked by: Russ
Hi, Russ! Thank you for your question. The Delta 50560-SS Wall Elbow will fit on 1/2" copper fittings with standard threads. We recommend the standard threads be sealed properly with plumber's tape. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

How far away from the corner should it be to allow enough room to rotate in installation?

Asked by: Doug
Hi Doug, Thank you for your question! You will need to take the length of the entire wall bow in consideration to determine where is needs to be mounted on your wall set up. Below is a link to the technical specifications for the 50560: http://www.deltafaucet.com/customersupport/documentation/50560.html?document=ts&fromDetailArea=bath&documentIndex=0#flashWrapper Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

My son recently installed this for a hand shower as part of a complete bathroom remodel. As instructed, he used a 1/2" IRON pipe nipple. Now dirty rusty h2o blasts into my new tub every time used! Why iron? Thanks alot...

Asked by: ChuckB
So hopefully you used a galvanized steel nipple or brass nipple not a black iron nipple which over time will rust and rot and leak. You just need 1/2 MIP thread. 
Answered by: Plumbbum
Date published: 2023-11-04

I need technical drawings for plumbing connections

Asked by: Richard
Hi Richard, Thank you for your question regarding the Delta Wall Elbow for Hand Shower 50560 model. Please see the below technical specifications for this model. Please feel free to call, email, or message us on social. https://media.deltafaucet.com/SpecSheet/dsp-b-50560_A.pdf Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2025, m_5, d_3, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_22
  • loc_en_US, sid_50560-RB, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 37ms
  • questions, product