Delta®
Conjunto interior para montaje en pared para llaves monomando
N.º de modelo: R3510-WL
CARACTERÍSTICAS DEL PRODUCTO
Instale este kit de conjunto interior para lavamanos de una manija de montaje en pared para usar con las llaves para baño de montaje en pared. Este cuerpo de latón sin plomo se envía con las válvulas y protectores de enlucido para facilitar la instalación. Como parte de una empresa que distribuye agua todos los días a través de millones de llaves en todo el mundo, Delta ofrece una garantía limitada de por vida en todas las piezas al consumidor original.
- Conjunto interior únicamente, se deben comprar los accesorios por separado
- Para usar con llaves para baño de una manija de montaje en pared
- El cuerpo de latón forjado ofrece años de fiabilidad detrás de la pared
- Profundidad de conjunto interior máxima de 2 3/4 in
- Puede probarse con aire (200 psi) o agua (300 psi) usando el cartucho suministrado
- El mecanismo de control es el cartucho de disco cerámico con diamantes incrustados
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Instalación con 2 orificios de 4"
Altura total:
3 1/2
Voltaje:
0
Tipo de válvula:
NA
SOPORTE PARA LA INSTALACIÓN
¿Necesita ayuda con la instalación? Busque instaladores locales de Delta® Obtenga cotizaciones. Lea reseñas.
¿Necesita ayuda con la instalación? ¡Mike y Hannah están aquí para ayudar! Reciba consejos de los profesionales para todo, desde la instalación hasta el cuidado del producto.
Instalación simplificada. Descargue la aplicación BILT sin cargo para acceder a instrucciones paso a paso interactivas en 3D.
RESEÑAS
Rated 1 out of
5
by
cmheath from
Faucet will not install despite correct valve
Installed this valve per the directions and most importantly at the location within the wall as called for by the specs. Note, the room for error is only +/- 1/8" which is no where near enough when impossible to tell exacly where finished wall will be of a tiled wall. Most frustrating part is even if this is installed 100% perfect, the faucet purchased to attach to this valve will not install. Only way for proper installation is if the valve actually sticks out further past the wall than called for in the directions... YES... having to cut open finished walls at this point. VERY frustrating. Material itself is great... instructions are very poor as they are not correct.
Date published: 2023-04-06
Rated 5 out of
5
by
PCharles from
Great Rough-in for wall faucet
A very solid well designed rough-in. I like the sweat connections.
Date published: 2020-09-04
Rated 5 out of
5
by
FOUNDRYno201 from
Great product & great value. Our plumber had no issues with installation, and it works great thus far. We finished the install with Delta Trinsic 1.2 gpm wall mount faucet and love the look.
Date published: 2018-02-06
Rated 4 out of
5
by
ars from
in wall faucet valve
the overall installation of this product was obviously a little more complicated then a regular sink faucet, but the completed look with the faucet assembly makes it worth it...I'd definitely recommend this if the in wall faucet is the look you are going for
Date published: 2018-02-03
Rated 5 out of
5
by
ASeers from
Does what it should!
[This review was collected as part of a promotion.] Rough in valve arrived quickly and was exactly what I needed. Quality is great and what you would expect from Delta.
Date published: 2017-09-12
Rated 5 out of
5
by
Nathalie from
Do it's job.
[This review was collected as part of a promotion.] Just got this installed working fine. No issues.
Date published: 2017-09-11
Preguntas y respuestas
Is this the correct rough for the Trinsic T3559LF-WF?
Web site says that the 3559LF-WL, which is combo of both the Trinsic wall-mount lav faucet trim and its rough-in, has been discontinued. The two parts (the trim and the rough) need to be purchased per item, and this Tesla rough is the one to use with the Trinsic. Yes?
Hi KF Park City,
Thank you for your question. The R3510-WL is the correct rough-in valve for the T3559LF-WL.
Best regards,
Jon
Date published: 2024-03-28
How Tight Should the Valve Cartridge Sleeve Be?
I'm trying to assemble this product with a Delta trim kit. I screwed the valve cartridge sleeve over the valve cartridge and onto the valve body. Then I tried to attach the valve trim and handle,... it didn't fit properly because the valve stem didn't protrude far enough to attache the handle screw. I decided that was the result of the valve cartridge sleeve no being fully engaged on the threads. So, I tried to tighten it with a pipe-wrench,... the result was that I destroyed the valve cartridge! What am I doing wrong?
Dear TIm,
Thank you for your question. The Delta cap/sleeve assembly for the Delta Wall Mount Rough-In R3510-WL should be hand tighten when installing it. Also, this installation requires 1/2" (13mm) copper tube fitting to extend 1 1/2" (38 mm) ~ 4" (102
mm) beyond the finished surface, for proper handle/valve part installation.
https://media.deltafaucet.com/MandI/85863%20Rev%20A.pdf
Best regards,
Tanya
Date published: 2017-04-29
Correct O-ring location?
Page 3 of the installation sheet appears to show the o-ring belonging on the male thread of the manifold, however, the only o-ring supplied came pre-installed on the male thread of the housing. Which location is correct?
Thank you for your question, Matt. The o-ring should go in the groove on the front of the bonnet nut.
Best regards,
Jon
Date published: 2024-03-28
What is the best way to level and secure the valve body so it is level from front to back. Ancor screw underneath tends to tilt it downward so it it not level.
Hi, David!
Thank you for your question. Here is a link to the Maintenance and Instruction guide for the Delta R3510-WL Rough Valve for help with installing the unit:
https://media.deltafaucet.com/MandI/85863%20Rev%20B.pdf
Best Regards, Rosanna
Date published: 2024-03-28
Can this valve be mounted upside-down?
What happens if it is installed upside down though? I'd like to put the valve handle above the spout, rather than to the side. Will the valve not function correctly? It seems as if the mixing mechanics would be the same.... Thank you to anyone who can explain why I shouldn't do this.
Date published: 2024-03-28
How much space should one leave above the portion of the valve body that turns upward?
Thank you for your question, John. The space needed above the valve will depend on the trim. Please refer to the Technical Specifications for the trim kit that you plan to use.
Best regards,
Jon
Date published: 2024-03-28
What delta shower faucets will fit this rough valve body?
Hello Casa vida,
Thank you for your question! I am happy to help you!
Our Delta R3510-WL will accept the following trim kits, I have attached links to the current models available.
https://www.deltafaucet.com/bathroom/product/T574LF-WL
https://www.deltafaucet.com/bathroom/product/T3559LF-WL
https://www.deltafaucet.com/bathroom/product/T552LF-WL
Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
I can use this valve to fill a bathtub??
Hi chux79,
Thank you for your question! We apologize that the information you are searching for was not readily available. We realize that can be very frustrating and I am happy to assist you! We thank you for being a loyal Delta Faucet customer.
The Delta Faucet model R3510-WL Single Handle Wall Mount Rough is recommended to be used only with single handle wall-mount bathroom faucets. There are no single-handle wall mount tub fillers available that would be compatible with this valve as well. The Delta Faucet model R3500-WL Two Handle Wall Mount Rough is the recommended valve for any 2 handle wall mount tub filler trim. We apologize for any inconvenience this may cause.
Please contact us back directly via email with any further questions.
Best Regards,
Skyler
Date published: 2024-03-28
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.