Delta®

Varilla horizontal

N.º de modelo: RP12517
Delta®
Varilla horizontal
N.º de modelo: RP12517
Precio de lista: $18.80
Precio en línea: $15.04
Envíos sin cargo para todos los pedidos de más de $49
Documentos y especificaciones
Información de instalación
Altura total:
13/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of 5 by from Bad Design for a Pop Up Ball Rod This is the worst design i have ever seen. The ball should have been completey round instead of a half round so nut could be adjusted properly with wear from use over time. The flat side with only 4 places for the nut to rest on wears and can not be tightened evenly so it leaks like a siv.
Date published: 2023-03-27
Rated 1 out of 5 by from Mislead by website I looked up the Arabella center set two handle bathroom faucet. It's discontinued after only being a couple years old, but underneath that shows the replacement parts. This horizontal rod was listed. It does not fit, is a different diameter and length of original. Mislead is an understatement. Perhaps with replacement parts list which models it works with. I bought two of these as it is a double sink. Im out my money and frankly shouldn't have to replace these already. I'm very disappointed with these faucets as I have had to change the o rings multiple times.
Date published: 2023-03-15
Rated 4 out of 5 by from Good replacement for original Although not as long as the original, it is a good replacement. The problem with this part (original and replacement) is that the plastic piece at the end will eventually break, as mine did on both faucets after 8 years. The metal rod should go the entire length.
Date published: 2021-12-13
Rated 3 out of 5 by from Too short It's simply too short. The specs and the web page for the product do not indicate what other longer rod can be used as an alternative.
Date published: 2017-09-19
Rated 5 out of 5 by from Straight Forward Order and Service Finding the part on the website was intuitive and the order was shipped promptly with tracking information notification. Exact mfg. replacement parts and professional service. Perfect.
Date published: 2010-12-21
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_RP12517, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 7ms
  • reviews, product
Preguntas y respuestas

I need one 12" long

Asked by: Gilly
Hi Gilly, Thank you for contacting us. Our longest horizontal rod is RP39922, which is 11 13/16" in length. http://www.deltafaucet.com/repairparts/details/rp39922.html Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

i need horizontal rod that is 8 inches long

Asked by: Donald
Thank you for your question, Donald! Delta does manufacture the RP22828 horizontal rod that is 8 1/8" long for our pop-up/drain assemblies. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP22828#specsTab Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

Will this work with a plastic drain assembly? If not, what are the part number options that will work with a plastic drain assembly?

Asked by: DBarb
Thank you for your question, DBarb! The RP12517 horizontal rod can be used on Delta plastic pop-up drain assemblies. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

WHAT IS THE DIAMETER OF THE BALL?

Asked by: DAVID
Hi David, Thank you for your question! The ball on the RP12517 has a diameter of 23/ 32nd. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Is this horizontal rod RP12517 the correct part to fit the Delta Zella 35706LF model? If not, please advise me as to the correct part number. Thanks.

Asked by: Anonymous
Hi, Rockysamson! Thank you for your question. The Delta RP12517 Horizontal Rod does fit the pop up drain assembly for the Delta 35706LF Faucet. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

why is the 'ball' not shaped like a 'ball' on the metal side? It seems to have some kind of shape. Won't that hinder with the seal when tightening with a pivot nut?

Asked by: moon
Hi, Moon! Thank you for your question. The ball on the Delta RP12517 Horizontal Rod is ball-shaped. The shape will not hinder the seal of the drain assembly. Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28

Does this horizontal rod fit with Model 25996LF?

Asked by: Betsy
Thank you for your question, Betsy! The RP12517 horizontal rod will not work with the RP62472 plastic pop up assembly included with this model. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

are the horizontal rods universal?

I don't know the model number of the The horizontal rod is broken and I need to know if one isze fits all before I start to disassemble and attempt repair.
Asked by: John
Thank you for your question. There are different size horizontal rods. Delta part #RP12517 is 6.125" in length while Delta part #RP33805 is 10 1/8" in length.
Answered by: Delta
Date published: 2024-03-28
  • y_2024, m_5, d_18, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_RP12517, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 15ms
  • questions, product