Delta®
Tornillo de fijación
N.º de modelo: RP152
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Altura total:
5/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
NEA Bob from
The problem is...
Excellent faucet for 15 years, set screw shaft is its weakest link.
CANNOT be tightend enough.
Handle loose, tightend screw, put back on, still loose. Removed handle, drove screw to its full stop in the shaft's handle, still in my hand. BUT, the screw's shaft apparently has a stop of its own preventing further depth so handle remains wobbly.
A 25¢ problem wrecks an otherwise great $300 product.
Date published: 2022-05-03
Rated 5 out of
5
by
Aqui from
Nice
I bought this last week and received few days after. When I installed to my Delta Faucet handle (Tub/Shower -134900 Series-) it was too loose. Although it fit but the handle still wiggle.I presume this is not a correct set screw for the handle. I would not recommend for the Tub/Shower (134900 Series)
Date published: 2021-02-18
Rated 5 out of
5
by
rude man from
no complaints now
Got the wrong set screw first time. Stupid delta uses different sizes for different faucets. Finallygot the right one. Fits great.
Date published: 2018-06-05
Rated 5 out of
5
by
grayhound from
perfect fit
I coule not find this item anywhere. Order item to rebuild faucet. Fit perfectly and fixed leak
Date published: 2012-07-12
Rated 5 out of
5
by
SomeSmartLady from
Lost it! Found it!
My son told me I could find anything I wanted on the internet. SO...
The shower in my apartment had some kind of governor on it and was WAY too cold (93*). I looked up the shower on the Delta site and found out how to re-set the governor that is under the shower handle. In the process, I lost the set screw out of the handle. (cover you drain with a cloth or paper before you start!) I found the replacement part number on the same set of instructions and ordered it. It was here in 2 days and I could not be prouder that I did this myself! Who says a 55-year old woman can't learn something new!
Date published: 2011-04-19
Preguntas y respuestas
i got the screw out, how do i take the handle off?
the handle seem to be stuck
i tried pulling it off and i couldn't
Thank you for your question. Once the set screw is loosened, the handle should pull off. It is possible that mineral deposits have built up around the handle. We recommend a 50/50 solution of white vinegar and water soaked around the handle to loosen the deposits.
Date published: 2024-03-28
I need to take off the handle and plate to readjust the temperature setting before it burns me - it has drifted over the last year. I have been thru all of my Allen wrenches and none of them fit. What size is this
Thank you for your question, Gerald! The set screw RP152 will use a 1/8 inch hex key, however, please know that this is not always the set screw used on all 13/14 series shower handles as they are sometimes model specific. To be sure this is the correct set screw, please refer to your original owners manual. If you need further assistance, please contact our customer service team directly at 1-800-345-3358 Monday-Friday: 8a.m.-8p.m. EST and Saturday: 9a.m.-6p.m. EST or via email at customerservice@deltafaucet.com.
Best regards, Edward
Date published: 2024-03-28
Hello, Which set screw fits my faucet handle?
My kitchen sink model is a Delta Classic 120 LF.
Dear Andy,
Thank you for your inquiry! The RP152 Delta Set Screw is the right set screw for the Delta Classic Kitchen 120LF faucet.
https://media.deltafaucet.com/PartsDiagram/120LF_420LF__73858_Rev_A.pdf
Best regards,
Tanya
Date published: 2017-06-07
Will a 1/4-28 x .25 set screw work for the H79 handle since mine was shipped without one?
Hi, Suebee!
Thank you for your question. I am sorry to hear that you did not receive the set screw. The set screw size that will fit the Delta H79 is 1/4-28 x .313.
Best Regards, Rosanna
Date published: 2024-06-09
How do you remove the set screw? What size allen wrench does it take? I can't seem to get a bite to remove it.
Thank you for your question, Joey! This set screw takes a 1/8" Allen wrench.
Best regards, Jon
Date published: 2024-03-28
What size hex key does this screw take?
Thank you for your question. Delta Faucet part # RP152 will use a 1/8 inch hex key.
Date published: 2024-03-28
WHAT IS THE SIZE OF THE SET SCREW RP152 AND CAN I PURCHASE IT LOCALLY
Thank you for your question, HAROLD! The RP152 set screw is 1/4-28 x .313 and is available both locally and online from many of our licensed retailers.
https://www.deltafaucet.com/where-to-buy
Best regards, Edward
Date published: 2024-03-28
what if the screw has a stripped head?
how can I take the screw out if it is stripped?
will an extractor kit from Lowe's like GRABIT 3 Pc. AldenS Pro Grabit Kit work?
Hi Tavi, Thank you for your question. If the head of the set screw is stripped., it can be drilled out. We cannot recommend a particular extractor kit.
Thanks,
Dave
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.