Delta®
Retén del tubo de salida
N.º de modelo: RP21463
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Altura total:
1 1/4
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
home from
Original
Part fit perfect, easy off and on
Date published: 2022-08-26
Rated 5 out of
5
by
Retainer spout from
Retainer spout
Works great. Easy to install.
Date published: 2021-11-08
Rated 5 out of
5
by
Jan from
Perfect fit and installation
Worked as is should and installed very easily
Date published: 2021-10-13
Rated 5 out of
5
by
William from
[This review was collected as part of a promotion.] Right part for the right job, just what I was looking for. I order it and in a few days it was delivered and now no more leaks. Thanks for the fast service. The thing that helped the most was I kept the information on my faucet and had the part numbers.
Date published: 2017-10-02
Rated 5 out of
5
by
abitaman from
Did the job as expected,
Date published: 2013-12-17
Rated 5 out of
5
by
loav8r from
Delta Set Screw Replacement Part
I stopped a slow leak in my kitchen faucet with the Delta RP22934 "O" Rings and the Delta RP21463 Set Screw Replacement Part. Simple to replace and they worked - and I'm not a maintenance kind of guy.
Date published: 2013-07-30
Rated 5 out of
5
by
Ralphfdez from
Important Part
This inexpensive plastic part is very important. Do not replace spout without installing a new one, along with new "O" rings. The faucet spout could be damaged and eventually leak if this part is worn or broken.
Date published: 2012-11-21
Rated 5 out of
5
by
YarnoSG from
Exactly as ordered
Exactly as ordered - what more can you ask?
Fit perfectly - Easy to search and had what I needed to fix my faucet at a reasonable price
Date published: 2011-04-26
Preguntas y respuestas
Broken part?
Leaking at the base. Is the round base of the part solid at the bottom, or does it have a break between one of the upright arms to allow for install? Mine separates at the base and I can't tell if it is cracked, or supposed to be that way. I'm going to replace the O rings for sure, but would order this if needed.
Hi Robert, Thank you for your question. The RP21463 spout retainer is not solid all the way around the base. The split allows the spout retainer to be opened wide enough for installation or removal. Replacing the o-rings should solve your issue.
Thanks,
Dave
Date published: 2024-03-28
Classic 2 handle waterfall kitchen faucet (2176-LHP-H24-A24 (chrome)
The spout assembly lifts upward and off the base when I turn on the water. I have removed the aerator and also tried replacing the #2 o rings and neither one of these actions resolved the problem. On close inspection, the inside of the spout retainer ( part # RP 21463) has # 2 raised rectangular shoulders that align with the spout bonnet ( part# RP21825A). These #2 "shoulders" appear to be worn and I guess that these raised areas are intended to hold the spout in place when turning on the water? Please advise as to your opinion as to what to do to fix the problem. Thanks,
Hi David, Thank you for your question. You are correct that the spout retainer helps hold the spout into place on your model 2176-LHP-H24-A24 faucet. Replacing the worn RP21463 should help solve the issue, although there is usually some movement on the hi arc spout when the water is turned on.
Thanks,
Dave
Date published: 2024-03-28
How do I remove the spout from the retainer ?
Hello Budd,
Thank you for your inquiry! The RP21463 spout retainer is not solid all the way around the base. It has a split that allows the spout retainer to be opened wide enough for installation or removal. To remove the retainer, slowly pry apart the bottom of the retainer to release it from the spout.
Best regards,
Tanya
Date published: 2024-03-28
after removing retainerand spout how do you remove spout?
Hi Jerry,
Thank you for your question. Once the spout retainer is removed, lift up on the spout tube while swiveling it back and forth to remove it.
Best regards,
Jon
Date published: 2024-03-28
Will this part fit on the Victorian collection kitchen faucet Model 155-WF & 156-wf series. Thank you
Thank you for your question, Doug. Unfortunately, this will not work with the model 155-WF or 156-WF. Those models use a different size retainer that is included with the part number RP37022.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP37022
Best regards, Jon
Date published: 2024-03-28
does the spout on a mod. 174 kitchen faucet just pull off out of the retainer?
Thank you for your question. The spout bonnet (Delta part #RP21464) would first need to be removed. At that point, the spout can then be detached from the retainer. Below is a link to the maintenance & installation guide for the 174-WHWF, which includes a parts breakdown.
http://www.deltafaucet.com/customersupport/documentation/174-whwf.html?document=mi&documentIndex=0#flashWrapper
Date published: 2024-03-28
When replacing o-rings under the spout of a model 174 faucet, I have the bonnet and spout retainer off but how do I remove the spout to access rings?
Hi Bill, Thank you for your question!
Once the spout bonnet is raised and the retainer is removed the spout assembly should slide off the valve body.
Best regards,
Brandis
Date published: 2024-03-28
Kitchen faucet leak
Model 172 leaks around the base only when the cold water is turned on Could it be the retainer RP21463 or the o-rings
Hi Jim, Thank you for your question. The RP21463 spout retainer should not be an issue with regard to the leak. The RP22934 o-rings would be the part that you will want to replace.
Thanks,
Dave
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.