Waterfall®

Juntas tóricas

N.º de modelo: RP22934
Agregar a favoritos
Busque instaladores locales de Delta®
Waterfall®
Juntas tóricas
N.º de modelo: RP22934
Precio de lista: $4.85
Precio en línea: $3.88
Envíos sin cargo para todos los pedidos de más de $49
Agregar a favoritos
Busque instaladores locales de Delta®
Documentos y especificaciones
Información de instalación
Altura total:
5/32
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of 5 by from Great replacement I did not know you could replace these to stop the base of the spout to quit leaking. These are better than changing the whole faucet! Thank you!!
Date published: 2022-12-04
Rated 4 out of 5 by from Delta Part RP22934 Received RP22934 this morning through USPS and installed it. Perfect fit but it took a week by USPS to get here.
Date published: 2022-05-14
Rated 5 out of 5 by from great fit! Thee o rings I puchased to repair my model 174 waterfall faucet worked very well.They were easy to install and returned our faucet to like new again!
Date published: 2022-01-18
Rated 5 out of 5 by from Happy Customer very easy to install and works as it should
Date published: 2021-10-13
Rated 5 out of 5 by from Perfection! I literally had purchased 4-5 different washers at Home Depot and Lowe's, and neither of them carry any product specific brands. Well I tried them all, and tried my best to match it up, but with every fix the faucet still leaked, and I mean poured. You buy the right product from the right company and you install it, and guess what? It doesn't leak at all. Y'all have the best products and the best customer service, hands down.
Date published: 2019-11-01
Rated 5 out of 5 by from O-rings Work great!
Date published: 2018-08-17
Rated 5 out of 5 by from Fits fine and seals well. [This review was collected as part of a promotion.] This also fits the Single Handle Waterfall faucet, needing both O-rings to seal the spout to the base. Old ones started leaking after 15 years. Pulled off old ones and slipped new ones right on.
Date published: 2016-12-15
Rated 5 out of 5 by from Fixed my leak Was able to fix my leak without calling a plumber and at a low cost
Date published: 2016-01-09
  • y_2024, m_10, d_17, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_RP22934, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 6ms
  • reviews, product
Preguntas y respuestas

#

Is this $2.30 for one o-ring?
Asked by: Dan
Hi Dan, Thank you for your question. RP22934 contains 2 o-rings. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

Should you lubricate the O rings when installing new and if so what lubricant is recommended?

Asked by: Tom
Hi Tom, Thank you for your question! Our Delta O-rings come pre-lubricated from the factory.We do not recommend adding additional lubrication. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

Can you tell me the size of the RP22934 orings

Asked by: Tomace
Hi, Tomace! Thank you for your question. The Delta RP22934 O-ring has an outer diameter or 1.137", an inner diameter of .859", and is .139" thick. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

What are the dimensions for this O-Ring?

Asked by: milt
Hi Milt, Thank you for your question! The o-ring has a 7/8" internal diameter, 1 1/8 outside diameter, and 1/8 thickness. Thanks, Jon
Answered by: DeltaFaucet3
Date published: 2024-03-28

Will this fit a model 172, 173, 174? The faucet is 20 years old. Thank you.

Asked by: Bill
Hi, Bill! Thank you for your question. The Delta RP22934 o-rings fit the base part of the spout assembly at the Delta models 172, 173, and 174 faucets. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

will the o rings fit rp47152 wand assembly debonair

Asked by: spot dr
Thank you for your question, spot dr! The wand does not have serviceable parts or o-rings that are available for order separately and a new wand assembly will need to be ordered. I apologize for any inconvenience this may cause. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Follow up to Steve's question about removing the spout to change the O rings

Please explain what you mean when you say, "Push down on the spout and then gently pry open and remove the spout retainer." I do not want to damage the spout. Where am I supposed to put pressure on when "pushing down on it"? Also what do you mean by prying open the spout retainer? Thanks
Asked by: emma
Thank you for your question, Emma. Once you slide the Sleeve up, you will see the white Spout Retainer around the base of the spout. This piece has a split or gap in it that you can pry open. This will allow you to remove the tab on the inside of the Spout Retainer from the slot on the spout. Since the tab could be pinched, you may need to press downward on the spout before removing the retainer. You can then swivel the spout back and forth as you lift up on it to slide it off. Best regards, Jon
Answered by: DeltaFaucet3
Date published: 2021-09-07

Does the package include 1 or 2 washers. Implies 2 but better to ask. Thanks

Asked by: Jim52
Hi, Jim52! Thank you for your question. The Delta RP22934 O-RIng Kit will include two o-rings. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28
  • y_2024, m_10, d_17, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_RP22934, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 23ms
  • questions, product