Delta®

Tornillo de fijación

N.º de modelo: RP23093
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Tornillo de fijación
N.º de modelo: RP23093
Precio de lista: $4.90
Precio en línea: $3.92
Envíos sin cargo para todos los pedidos de más de $49
Agregar a favoritos
Busque instaladores locales de Delta®
Documentos y especificaciones
Información de instalación
Altura total:
7/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Preguntas y respuestas

What are the thread sizes?  I am a home owner and would like to look locally.

Asked by: Them
Hi, Them! Thank you for your question. The Delta RP23093 Set Screw size is #1/4-28 x .438" UNF hexagon socket set screw. It is .438 inches long. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

I need a set screw for the Trinsic Robe Hook, Part 379935 (an installer accidentally lost it and I cannot find one in a hardware store to fit)

Asked by: Big Ring
Thank you for your question, Big Ring! The set screw is not sold separately from the mounting anchor and a new one will need to be purchased. The correct part number needed will depend on the finish as seen in on page 2 of the Maintenance and Installation Manual below. Alternatively this screw may be found locally at plumbing supplier. It is a 8-32 x 8mm screw. https://media.deltafaucet.com/MandI/102839%20Rev%20A.pdf Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Is this the set screw to use for the handles on older Monitor series (2 handles, temp control and volume control separate)? Thanks!

Asked by: Anya
Hello Anya, Thank you for your inquiry! The set screw RP23093 is designed for a few single handle kitchen faucets and for some roman tub spouts. Best regards, Tanya
Answered by: Delta Faucet
Date published: 2024-03-28

What size is the size wrench needed for the set screw

Asked by: rusty0422
Hi rusty0422, Thank you for your question about the Delta Faucet RP23093. The set screw uses a 1/8" Allen wrench. Please reach out if you have any additional questions! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28
  • y_2024, m_9, d_18, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_RP23093, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 37ms
  • questions, product