Delta®
Junta tórica, grande, todas las series Monitor®
N.º de modelo: RP23336
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1/8
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
D Speegle from
Parts
It is great to help with parts when we need them! BDC is great to work with and Jared is always there to help.
Date published: 2020-05-05
Rated 5 out of
5
by
Jeff from
Good product
[This review was collected as part of a promotion.] The generic brands at the big box store are inferior to this seal. The Delta replacement parts fits like the original & are very reliable. I only use Delta parts for my rentals.
Date published: 2017-12-08
Rated 5 out of
5
by
Dave from
perfect match!
Great service an promptly delivery!, I think this is a great company, all the parts I needed were easy to find in the catalog
Date published: 2015-04-29
Rated 5 out of
5
by
mac3890 from
Right parts first time
All parts fit my shower like a glove
Date published: 2010-09-04
Rated 5 out of
5
by
tadgie from
easy fix parts
Just what we needed. Thanks
Date published: 2009-12-14
Preguntas y respuestas
What is the purpose for O-ring #RP23336? is it just to hold the sleeve in place? I recently changed the cartridge to stop the shower head leak and some how misplaced the o-ring. Will it cause leaks if not installed? Thanks!
Thank you for your question, Toan! The RP23336 o-ring is only meant to hold the sleeve in place and will not cause a leak if it is not installed.
Best regards, Edward
Date published: 2024-03-28
O --Ring ( RP23336 )
When removing the TRIM SLEEVE in order to change the Shower Cartridge Does this O- Ring (RP 23336 ) stay in place in the back around the Valve body or does this O -Ring come OUT with the Trim SLeeve itself when pulling out the Trim SLeeve.?
How about when you put the TRIM SLEEVE back----where do you position this O-- Ring ( RP23336 )---right behind the Bonnet Nut?
--Thank you
Hi Doug,
Thank you for your question. The o-ring should stay on the valve when you remove the sleeve. We recommend to bring the o-ring forward on the valve (behind the bonnet nut) before sliding the sleeve back on. If your valve has a groove, it is not intended for the o-ring.
Best regards,
Jon
Date published: 2024-03-28
O Ring --- RP23336
Because of a small but persistent leak from Shower Head, I want to replace the Original Cartridge on my Delta Shower ( Model # 1324 ) with a new RP19804 Cartridge. The Original was from 1999---so its 17 years old now.
Will I Likely need to also Replace this O --Ring ( RP23336 ) at the same time or can I just re-use the old One ? The Trim Sleeve fits over this O- Ring ( RP23336 ) I believe.
Thanks very Much. --- DJ
Hi DJ,
Thank you for your question! The RP23336 can be reused.
Best regards,
Jon
Date published: 2024-03-28
Please supply the specs for O-ring # RP23336
Hi Don,
Thank you for your question. This o-ring is 2-9/64" OD x 1-55/64" ID x .139.
Thanks,
Jon
Date published: 2024-03-28
Where does this o ring go
Is this the foam piece on the back side of the escutcheon (face Plate) for a Monitor 1700 series?
Hi Alex,
Thank you for your question. This o-ring goes under the trim sleeve. The foam gasket is not available separately, but will come with the escutcheon plate. You may also seal around the plate using clear silicone.
Best regards,
Jon
Date published: 2024-03-28
hi what a diameter of this o-ring??
Hi bernard,
Thank you for your question about the Delta Faucet RP23336.
This o-ring is 2-9/64" OD x 1-55/64" ID x .139.
Please contact us directly if you have any additional questions!
Best Regards,
Bryan
Digital Communications Specialist
Date published: 2024-03-28
will this o-ring work with series a1700 valve? mine was installed in 2000 and uses presure balance cartridge
Hi jimbill,
Thanks so much for contacting Delta Faucet Company!
The O-Ring MODEL#: RP23336 is for all our Monitor® Series trim sleeves.
Please reach out with further questions!
Best Regards,
Kelley
Digital Communications Specialist
Date published: 2024-03-28
What are the dimensions of the RP23336 O Ring?
Hello Kenneth,
Thank you for your question! I am happy to help you!
Our Delta Faucet DELTA® O-Ring - Large - All Monitor® Series MODEL#: RP23336 dimensions are 2-9/64" OD x 1-55/64" ID x .139.
Thank you for being a loyal Delta customer. Please contact us back for any further questions.
Best Regards,
Nicole
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.