Delta®

Conjunto de vástago, 2H

N.º de modelo: RP25513
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Conjunto de vástago, 2H
N.º de modelo: RP25513
Precio de lista: $39.45
Precio en línea: $31.56
Envíos sin cargo para todos los pedidos de más de $49
Agregar a favoritos
Busque instaladores locales de Delta®
CARACTERÍSTICAS DEL PRODUCTO
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California
Documentos y especificaciones
Información de instalación
Altura total:
1 7/8
Voltaje:
0
Tipo de válvula:
Cartucho
RESEÑAS
Rated 5 out of 5 by from Impressive support from Delta This part (Delta RP25513) fixed my 2 handle Delta faucet problem, where I had leaking coming out from the handle. This is the first time I ever attempted a faucet repair myself and it went without a hitch. A video from the Lowes website was a great help. And I have to say, I used the chat feature from the Delta website and it did a great job pointing me to a PDF on their website that told me the exact part that I needed! Very helpful! Then Delta Customer Support followed up with an email to me to see if I needed any assistance. Impressive support from Delta.
Date published: 2023-04-23
Rated 4 out of 5 by from Easy to replace, but I love working with Delta. Their parts are easy to find and work with. That said, these replacement cartridges should really come with the spring and seal also.
Date published: 2022-12-07
Rated 5 out of 5 by from Parts for faucets They came quickly, they were the correct part, they have been installed, they are working well. Good job !!!!!
Date published: 2022-02-14
Rated 5 out of 5 by from Works great Installed this cartridge in a matter of minutes and it works great! No more leaks!
Date published: 2021-12-22
Rated 5 out of 5 by from Did the trick. fit perfectly, would buy again.
Date published: 2021-11-04
Rated 5 out of 5 by from Repair/Replacement Quick turn around service after order. Parts were correct, and fairly easy to install.
Date published: 2021-09-13
Rated 5 out of 5 by from The stem (RP25513) really fixed all our problems!! We bought this stem (RP25513) in 2014 and it fixed our needs, I guess it pays to investigate the parts, or we would be paying out tons of dollars had we not have done it ourselves.
Date published: 2021-05-10
Rated 5 out of 5 by from The exact product Previously I purchased a replacement part from Lowes. Yes it stated it was for a Delta product. From the very first you couldn't turn the handle all the way to the off position or water would drip. The Delta part fit perfect and works perfect. Thank goodness, I was beginning to doubt my plumber skills due to the aftermarket part.
Date published: 2021-02-04
  • y_2024, m_11, d_11, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_US, sid_RP25513, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
Preguntas y respuestas

I just replaced the RP25513 cartridge in my bathroom shower faucet. Where can I find a replacement extension?

There is a collar that extends the faucet handle out from the shower wall about 3 1/2 inches. There is an extension inside the collar that extends the cartridge through the collar out to the handle. It's about 3 1/2 inches long. Where can I find a replacement for this extension?
Asked by: Freeman
Hi Freeman, Thank you for your question. The RP18627 is the stem extension used in our 2 and 3 handle tub/shower faucets. You can order this item online or from your local retailer or wholesaler that sells Delta products. http://www.deltafaucet.com/repairparts/details/rp18627.html?showPhotoGallery=false Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I just replaced the RP25513-3 due to water leaking from the handle. That problem is now fixed; however, I still have a small drip coming from the faucet. Do I need to replace the spring and seal in the canister? If so, what is the part number for that?

Asked by: Tony
Thank you for your question, Tony! The RP25513 stem unit assemblies work in conjunction with the RP4993 seats and springs. It is always a good idea to change these seals when changing the stem units. https://www.deltafaucet.com/parts-product-detail?modelNumber=RP4993 Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Will this fit a 10 year old discontinued fauscet which I believe uses the part # RP24096?

Asked by: Kevin
Hi Kevin, Thank you for your question! The RP24096 and RP25513 stem units are exactly the same. The only difference is the RP25513 includes the 1/4 turn stop part number RP24097. Best regards, Brandis
Answered by: DeltaFaucet7
Date published: 2024-03-28

I have installed the complete hot water end valve assembly w/ the 25513 valve stem(older porcelain 2 handle Victorian widespread faucet). I turn on the water supply from the wall the water continues to run even after turning the handle a quarter turn.

Asked by: Cards
Thank you for your question, Cards! The stem unit, RP25513, requires a seat and spring just below the stem in order to properly seal off water. Furthermore, the stem itself may need to be turned. The hot water handle is typically on the left hand side, so the stem itself should have the raised portion, or stop, facing to the right with the flat portion of the stem facing away from the spout. Best regards, Edward
Answered by: Delta Faucet
Date published: 2024-03-28

Ordered part RP25513 for a leaky handle. Does the stopper need to be in a certain position for the water to work correctly? The water will either turn on fully or I can’t turn the water off. 

Asked by: MP23
Thank you for your question, MP23! I do apologize that your handle is leaking, but will be more than happy to help! The 1/4 turn stops included with stem unit RP25513, need to be installed in a certain position. The permanent 1/4 turn stops. should be facing to the right, on both the hot and the cold side. On the hot side, the removable 1/4 turn stop should be on the front of the stem unit, running from 6:00-8:00. The flat portion of the hot side brass stem, should be facing the left. On the cold side, the removable 1/4 turn stop should be on the back of the stem, running from 12:00-2:00. The flat portion of the brass stem, should be facing the right. If you need further assistance, feel free to contact us directly. Best Regards, Benjamin
Answered by: Delta Faucet
Date published: 2024-03-28

I bought part RP25513 thinking it would work for both cold and hot. It works fine for hot, but it works in reverse for cold. Is there another part number for cold?

Asked by: Peggy
Hi, Peggy! Thank you for your question. The Delta RP25513 Stem Unit Assembly works for both hot and cold valve sides. We recommend changing the direction of the stem to change the orientation of the handle. Best Regards, Rosanna
Answered by: Delta Faucet
Date published: 2024-03-28

my faucet takes an RP1740C. the replacement part has a plastic stem. the original has a brass stem. is an RP25513 interchangeable with RP1740C

Asked by: jay
Hi Jay, Thank you for your question. Stem RP22513 can be used in place of RP1740. Best Regards, Courtney
Answered by: DeltaFaucet12
Date published: 2024-03-28

What is the part # for the spring and  seal for the PR25513 

Asked by: MCPO
Hi, MCPO! Thank you for your question. The RP25513 stem unit assembly works with the RP4993 seat and spring kit. Here is the link to this kit: https://www.deltafaucet.com/parts-product-detail?modelNumber=RP4993 Best Regards, Rosanna
Answered by: DeltaFaucet11
Date published: 2024-03-28
  • y_2024, m_11, d_11, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_255
  • loc_en_US, sid_RP25513, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 6ms
  • questions, product
Información especial
Imagen de advertencia
ADVERTENCIA de la Proposición 65 de California