Delta®
Drain - Tub in Chrome
N.º de modelo: RP31558
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
- Tapón y filtro de desagüe
- Operado con el pie
- Las roscas del tornillo del tapón miden de 5/16" a 18".
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1 3/8
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
Wayne N from
Constantly gets stuck and won’t drain
This product installed easily and looks very nice but that is where the positives stop. Since almost immediately after installation, the stopper will get stuck in the down position and not allow you to drain the tub.
Date published: 2024-09-22
Rated 2 out of
5
by
Homeowner from
Delta Push Drain Stopper
Difficult to close. Often takes several pushes to seal closed.
Date published: 2024-05-05
Rated 5 out of
5
by
TheGreyGhost from
Love it
Perfect for my need. Very pretty.
Date published: 2024-04-08
Rated 5 out of
5
by
RS from
Drain part.
It arrived quickly and was exactly as described.
Date published: 2024-02-11
Rated 1 out of
5
by
JHoff513 from
Terrible Design, Read the Reviews
Do NOT buy this product. I ordered two of them despite the bad reviews because my plumber with 30+ years experience said he has never had issues with toe stoppers. Well, he could not make this product work no matter what. We returned them and went with another brand even though the new product color was slightly off from my current Delta hardware because I wanted high quality.
Date published: 2023-11-27
Rated 5 out of
5
by
KC from
Perfect match
I was afraid the metals wouldn't match. Delta champagne bronze. Looks high-end. Love it!
Date published: 2023-11-15
Rated 1 out of
5
by
SK from
Does not work
This item doesn’t work. I purchased in the hope that some of the reviews were wrong, unfortunately not. Installed in my bath tub and can’t use it……
Date published: 2023-07-24
Rated 1 out of
5
by
LMSZ from
Garbage. Does not seal.
Don't waste your money or sanity on this. Simply does not work at all.
Date published: 2023-06-19
Preguntas y respuestas
can I replace the rubber gasket? What is the delta part number?
That is 100% bullcrap. The drain stoppers flange and base unscrew allowing the rubber gasket to be removed. I have the same problem as the previous customer.
Is Delta faucet saying they will not sell you a $3 rubber gasket after you paid over $100 for a drain stopper?
Thats bad business.
Date published: 2023-04-04
can I purchase the drain plug only?
Hello Pamela,
Thank you for our inquiry! Yes, the RP16686 stopper assembly for the Delta Drain Assembly RP31558 can be purchased separately.
https://www.deltafaucet.com/bathroom/product/RP16686
Best regards,
Tanya
Date published: 2024-03-28
How do I remove the "inner parts" for cleaning and unclogging? The top part unscrews by hand which is nice but I cannot figure your how to remove the other parts.
Thank you for your question Hartmut!
The Delta Tub Drain Stopper and Flange RP31558 is not designed to be taken apart, besides the stopper unscrewing out of the flange.
Best Regards,
Christina
Date published: 2024-03-28
Do I install “as is” or can I remove the rubber gasket/washer and use plumber’s putty? I installed it using the washer and the top of the lip of the drain is about 1/16” above water level. I’m afraid to screw the assembly in any tighter. Thanks!
Hello Whking52,
Than you for your question. The rubber gasket around the stopper assembly is not designed to be removed. The gasket helps seal and close off the drain, when trying to hold water in the tub.
Best regards,
Tanya
Date published: 2024-03-28
the specification said: The threads on the flange are 1 1/2" and 11 1/2 TPI, what is the outside dimension of the threads when you measure
Hello jn7379,
Thank you for your question! The outer diameter of the threads is 1 55/64".
Best regards, Jon
Date published: 2024-03-28
I need to replace a drain in a large porcelain wash sink. The hole is 2 3/8" wide and the opening is 1/2" deep. Will this drain fit?
Hi, Jaustin105!
Thank you for your question. The RP31558 Drain Assembly has an outer diameter of 2.83" and an inner diameter of 1.60". Here is a link to the technical specifications sheet for the drain assembly this works for:
https://media.deltafaucet.com/SpecSheet/dsp-b-rp293_A.pdf
Best Regards, Rosanna
Date published: 2024-03-28
How do i remove the flange. The stopper is broke out.
Hi, Thank you for contacting us.
We apologize for any inconvenience with your Delta Faucet Company product. I am also more than happy to have this opportunity to help you.
The flange should screw out.
Please contact us back if you have any questions or if you need further assistance you may call us at 1-800-345-3358. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday. Thank you for your cooperation.
Best Regards,
Bethany
Date published: 2024-03-28
Hello What are all if the sizing specifications for this item?
Hi, Morrie!
Thank you for your question. The Delta 31558 drain tub stopper screw threads are 5/16" - 18. Here is a link to the technical specifications for the RP293 bath waste that includes the tub stopper:
https://media.deltafaucet.com/SpecSheet/DSP-B-RP293_Rev_B.pdf
Best Regards,
Rosanna
Date published: 2024-03-28
BUNDLES FEATURING THIS PRODUCT
View Product
![Image-Master-BVS5-EE022-WH]()
Solo en Lowe's
EverEdge®
EverEdge® 60x32 Alcove Bathtub Bundle with Trim, Drain and Overflow - Left Drain
Precio de lista: $1,455.53
Acabados estándar
BVS5-EE022-WH
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.