Delta®
Conjunto de cartucho, Monitor® serie 17 (04/2006 y anterior)
N.º de modelo: RP32104
Image Thumbnail, click to view zoomed product image 
nulo 
CARACTERÍSTICAS DEL PRODUCTO
Dual-function valve cartridge maintains a consistent water temperature from one shower to the next. Monitors water pressure to balance temperature. All Delta® tub and shower faucets are engineered to keep the water temperature within a safe ±3.6° F (±1.7° C)*. Esta tecnología garantiza que su familia no sufra un cambio repentino y posiblemente poco seguro en la temperatura del agua porque se hace correr el agua en otra parte, como mediante el uso de un lavavajillas, la descarga de un inodoro o el uso de una lavadora. The valve cartridge features an adjustable handle limit stop that, when properly set, helps ensure the handle cannot be turned to a position that is too hot for comfort*. Easily replaced seals make maintenance a snap. Comes with all Delta pressure balance tub and shower faucets. *Requiere que la temperatura del agua de entrada se haya establecido correctamente. Puede requerir un ajuste según la estación.
- Monitor® dual-function pressure balance cartridge
- Use with Monitor® 1700/1800 Series tub & showers produced before March 2007
- Permite tener controles diferentes para el volumen y la temperatura
- Also works with 1500 Series produced after 1995
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Overall Height (in.) :
8
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
Bad Design Delta RP32104 from
Delta RP32104
I am using a licensed plumber and we are on my 4th RP32104 in 8 months. The first one we replaced to replace a gasket and that stopped the leak but after a month or so the handle spins around 360 and won't shut off the watter. I am not at all forceing or turning the handle with force because this cartridge cost $85 and I have purchased 4. I cannot change the housing without breaking tile and cuting the copper pipes but this is a bad design. Obviously Delta has changed the design because the old one lasted 17 years. This tiny square is the only thing that stops the handel from spinning around 360 and it keeps breaking. Can you help? This tiny
Date published: 2024-07-13
Rated 5 out of
5
by
Carrie from
what is the shower trim fits Rp32104 cartridge?
I got the cartridge. Which is the shower trim to fit with?
Thank you.
Date published: 2023-12-03
Rated 5 out of
5
by
Mary from
it works!
I wasted $60 on a generic alternative from Lowe's before ordering this cartridge. Fixed all our problems as soon as we replaced it will the real deal.
Date published: 2022-11-11
Rated 3 out of
5
by
NoNick from
single handle for RP32104 cartridge
Just have plumber replaced RP32104 cartridge inside my Delta monitor series single handle, but the handle turn over 360, and couldn't stop at position of hot/cold water. Replaced second RP32104, still have same issue, handle could be turn over and over freely. I think I need to change this handle (should be around 15 years). Which single handle should I purchase to match this RP32104, would you send me a link?
Date published: 2022-10-13
Rated 4 out of
5
by
no nickname from
Happy I was able to find these!
My delta faucets failed after 20 years and I was relieved I was able to find the correct replacement cartridges. I now have to have them installed to find out if they solved the problem...
Date published: 2022-06-04
Rated 5 out of
5
by
Waterless in KS from
Excellent customer service
I purchased my delta faucets over 20 years ago and when they required repair, I was worried I was not going to be able to find parts. I was able to identify the part number and order through customer service, so I am relieved I don't have to buy new fixtures...I will say that I had a similar issue with another brand, and theirs was warrantied for life, so that replacement has no charge...Wish delta had the same policy-but I am happy to be able to find the correct part.
Date published: 2022-05-27
Rated 5 out of
5
by
Alan from
Delta shower faucet cartridge.
Installed easily after all water supply shut off. Works well. Stopped the dripping. Was a bit difficult to find the right cartridge- faucet installed many years ago and no model number visible, even after disassembly.
Date published: 2022-01-21
Rated 4 out of
5
by
Steve S from
Delta RP32104 Cartridge Assembly - Monitor® 17 Series
Cartridge works great and included parts so I could use the 17 series shower parts on a 15 series control. Instructions were a little confusing and had to use a little trial and error to figure it out.
Date published: 2022-01-10
Preguntas y respuestas
oring kit for rp32104
Hi Phantom6532, Thank you for your question. The o-rings to the RP32104 cartridge are available as part of RP28603. RP28603 contains the o-rings, seats, springs, and quad rings.
http://www.deltafaucet.com/repairparts/details/rp28603.html?showPhotoGallery=false
Thanks,
Dave
Date published: 2024-03-28
The cartridge listed in my instruction sheet is RP16207 which is discontinued. Another site stated that RP32104 is the replacement. Is this correct information? Thank you Paula
Hi, Paula!
Thank you for your question. The Delta RP32104 Valve Cartridge Assembly is the direct replacement for the Delta RP16207 Valve Cartridge Assembly.
Best Regards,
Rosanna
Date published: 2024-03-28
Hi I'm replacing a cartridge for 17series delta is part # de32104 compatible or same as rp32104 and if so what is the factory set temp and how do i get it hotter if rotational stop is set at hotter?
Thank you for your question, Victoria408! Although DE32104 is designed to work with a Delta Monitor 17 series valve, this is not a genuine Delta part number and the RP32104 is recommended. This cartridge will come set on a luke-warm, neutral setting but instructions for adjusting the rotational limit stop can be found on page 6, Step C of the Maintenance and Installation manual below.
https://media.deltafaucet.com/MandI/33782_v1.pdf
Best regards, Edward
Date published: 2024-03-28
I have a Delta 1700 series cartridge that needs to be replaced, is the RP32104 the one I should replace it with
Thank you for our question, Robert! The Delta RP32104 (white top) cartridge is the current replacement part for a 1700 Series tub/shower faucet installed prior to February 2006. The RP46463 (gray top) cartridge is for MultiChoice 17 Series models (manufactured after February 2006).
Best regards,
Tanya
Date published: 2024-03-28
32104 and 32106 cartridge the same
after looking for a picture that matches the shower unit i have ,I came across a cartridge-handle repair kit...rp32106..my question is the cartridge rp32104 the same as i don't need the handle part...Thanks Rob
Hi Rob S, Thank you for your question!
The RP32104 valve cartridge is the same cartridge that comes in the RP32106 1700 series handle kit.
Best regards,
Brandis
Date published: 2024-03-28
Can you purchase a new o ring that fits into the groove on the cartridge (RP 32104)?
Hello Chris1,
Thank you for your question. Unfortunately, we do not offer the o-ring as a separate part, but you may be able to find a replacement locally. The outer o-ring is 1 9/16 x 1 ¾ x 3/32 & the Uniform Size is 129.
Best regards,
Tanya
Date published: 2024-03-28
I had a Delta Monitor single handle cartridge replaced in a guest bath and now the water isn't quite as hot as it was, and nothing else has changed. Could it be that the plumber didn't put the rotational limit stop in the proper place? What is the fix?
Hi, Steve.
Thank you for your question. The RP32104 does have a rotational limit stop that can be adjusted to get hotter water. Here is a link to a how to video on how to adjust the rotational limit stop:
https://www.deltafaucet.com/video-gallery/video-page-1?videoId=n2_uZ7wgV1I
If you should need more assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2024-04-01
i'm replacing a 1500 series Delta Monitor. I'd like to buy a new 1700 Series. Is my plumbing the same (the cartridges look the same)?
Hi Greg, Thank you for your question. If the screw holes in the round escutcheon of your current 1500 series faucet are diagonally across from one another at 1 and 7 o-clock you can upgrade to a new 17 series faucet. You will need to order the Monitor 17 series trim of your choice, a RP32104 cartridge, and a RP22734 bonnet nut to installl with your existing rough in valve. If the screw holes on the escutcheon are in a horizontal line at 5 and 7 o-clock no conversion kit is available.
Thanks,
Dave
Date published: 2024-03-28
Does the RP32104 cartridge replace the RP28604 for the model 1748CB74 shower?
Hi,
Thank you for your question. The RP32104 cartridge is the correct replacement for the RP28604 cartridge.
Best regards,
Brandis
Date published: 2024-03-28
I have a delta 1400 series will this valve work if I want to upgrade to a t series 17 series?
Thank you for your question, Arindale! The RP32104 cartridge on this product page is for a 1700 series Monitor shower. The RP19804 cartridge is correct for a 1400 series but will work with any T14 trim kit. The R10000-UNBX is the correct valve for a current T14 trim kit however this is not always needed as the T14 shower trim will work with an older 1400 valve body provided you continue to use the RP19804 cartridge. Changing out the valve body will involve un-soldering the current valve, which may also involve tearing into the surround wall or tile if there is no access panel.
Best regards,
Tanya
Date published: 2024-03-28
Is RP32104 correct cartridge is updating old 1700 series monitor
I currently have a older (approx 2001) 1700 series monitor shower trim and valve. I am looking to change the trim. Will the existing cartridge work with current 14 or 15 series trim or do I need to change cartridge to the RP32104 or some other cartridge.
Hi Brad,
Thank you for your question! You can updated the trim on a 1700 series shower with any of our Monitor T17 series (not T17T) trim kits. However, you will need to use the original cartridge, or the RP32104, rather than the cartridge that comes with the kit.
http://www.deltafaucet.com/search/results.html?q=t17%20trim%20monitor&page=1&num=20&collection=DLT_all&tab=DLT_products
Thanks,
Jon
Date published: 2024-03-28
Are the quad rings for RP32104 O rings?
quad rings (number 6 on the drawing)
Hi Ron,
Thank you for your question. Quad rings are different from o-rings in that they are flat. These are also available with RP28603.
http://www.deltafaucet.com/repairparts/details/rp28603.html
Best regards,
Jon
Date published: 2024-03-28
I installed a replacement cartridge RP32104 for original 2001 1700 series. Everything works fine except hot and cold is reversed. Could I have made a mistake, or does that mean hot and cold pipes are reversed? Is there a fix for this cartridge?
Thank you for your question, RevJim! This can be correct by turning off the water supply, removing the cartridge, sliding off the cap, and flipping it 180 degrees. It may be that the lines to the valve are reversed (typically hot is on the right). Either way, this will correct the issue you are experiencing. Please refer to Section 3A on page 5 of the Installation Instructions for more information.
https://media.deltafaucet.com/MandI/33782_v1.pdf
Best regards, Jon
Date published: 2024-03-28
Double tabs prevent cartrige from seating in keyway of brass housing
There are tow tabs / keys on the shoulder of the cartrige. One cartrige tab is to seat into the recess / keyway of the brass housing. There is only one keyway on the housing of my model. Therefore the second key / tab butts up against the brass housing and prevents the other from seating when you thread on the retaining ring. You flip the cartrige if you the hot / cold inputs are reversed. Are you supposed to file off the extra tab / key when you decide if you are going to orient the hot port in the conventional or reverse position?
Thank you for your question. Delta Faucet model # RP32104 is used on our pre-multi-choice valving system that we introduced in 2006. Based on your descriiption of your cartridge, you have a multi-choice valve which is model # RP46463. The easiest way to tell this is if you have a gray cap on your cartridge, you have the incorrect cartridge. You will need one with a white cap to fit your present valve.
Date published: 2024-03-28
Can I replace the "connected' o-rings only?
Hello Ginny,
Thank you for your question. Typically, if your faucet is leaking from the spout or shower head, in the off position. This can be resolved by replacing the seats, springs, and quad seals which are available separately as part number RP28603. If this does not resolve the issue, we recommend replacing the RP32104 cartridge assembly. Please feel free to call, email, or message us on social if there is anything else you need.
Best regards,
Tanya
Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet
Date published: 2024-03-28
Will the RP32104 work as a replacement for the Delta Monitor 1700? Or is it the RP46463
Thank you for our question, Mike! The RP32104 cartridge is the current replacement part for a 1700 Series tub/shower faucet installed prior to February 2006. The RP46463 cartridge is for MultiChoice 17 Series models (manufactured after February 2006)
Best regards, Jon
Date published: 2024-03-28
I have a 1500 Series Monitor with the 5 and 7 o'clock valve. Will the RP32104 valve work as a replacement? I am NOT replacing the trim, I am planning on keeping the old trim.
Thank you for your question, TheFlagInspector! The RP32104 cartridge would work with a Delta 1500 series trim that has screws at 5 and 7. If you need further assistance, feel free to contact us directly.
Best Regards, Benjamin
Date published: 2024-03-28
I want to replace my pre-2006 dual control Monitor 1700 with a T17293-RB-I.
Is it correct that need the RP32104 to make this possible? I do not want to tear out the wall.
Dear Clint,
Thank you for your inquiry! As long as the screw holes on your large round escutcheon plate are at the 1 and 7 o'clock positions and you do not have a push button shower diverter directly below the off and on handle, then any of the Delta tub and shower trim kits that start with a T17, except for the T17T series trim kits will interchange for you. The cartridges that come with the new trim kits will not fit your valve body, so you will need to reuse your existing cartridge (RP32104).
Best regards,
Tanya
Date published: 2017-05-22
Will the Delta Faucet BT14296-OB work with this cartridge?
Thank you for your question, Stephen! This cartridge is designed for 1700 Series models. You may install any current 17 Series trim kit on an existing 1700 Series valve and cartridge. Unfortunately, the model BT14296-OB will not work. To use a 14 series trim, the valve would first need to be replaced with an R10000 Rough-In.
https://www.deltafaucet.com/bathroom/showering/tub-and-shower-faucets
Best regards,
Jon
Date published: 2024-03-28
I have a Monitor system that is leaking in wall, at control valve area, while faucet is on and shower head is selected. Does this sound like it could be a faulty cartridge? Thank you in advance for any advice.
Hi, Robbie.
Thank you for your question, and I am sorry to hear that you are experiencing a leak from your Delta faucet handle when the water is on. We do recommend to replace the valve cartridge assembly to fix this leak. If you should need further assistance with this, please contact our Delta Customer Service line at (800)345-3358. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2024-03-28
how to remove the rp32104 cartridge
Thank you for your question, jckligge! To remove the RP32104 cartridge, you will first need to turn the water off to the valve, room or home. Next you will need to pry off the temperature knob cover, unscrew the Phillips head screw, then remove the handle and sleeve. The bonnet nut can be loosened counter-clockwise which will then allow the cartridge to be pulled straight out.
Best regards, Edward
Date published: 2024-03-28
is an extension available for this cartridge?
due to change in wall tile after installation of valve assembly (MultiChoice), cartridge is not long enough, does a extension for this model exist? or should I get behind wall and relocate valve?
Hi Pete,
Thank you for your question! The RP77992 extension will add 1 3/4" to the maximum valve depth.
http://www.deltafaucet.com/bath/details/rp77992.html
Best regards,
Jon
Date published: 2024-03-28
New valve - old cartridge?
I have a new valve (R10000PX). Will this RP32104 cartridge work or did the warehouse give me the wrong one? Clearly I should have received the RP46463, but will the RP32104 work? Very hard to get washers seated!!
Hi tominc,
Thank you for your question. Unfortunately, the RP32104 is not designed to fit the R10000 valve. The RP46463 will include the needed adapter assembly.
Best regards,
Jon
Date published: 2024-03-28
Will this work in a rough in value from before 2006 for a 1300 series? I'm changing an old 1300 series kit with a new 17 series kit. It doesn't seem like the rough in valve would work with the new cartridge.
Hello Matt76,
Thank you for your question. If your older 1300 series Delta showering valve has the older RP19804 (white/blue) cartridge assembly in it, it can not be upgraded to a 17 Series unless the rough-in valve is also replace with the MultiChoice Universal Valve R10000-UNBX.
Best regards,
Tanya
Date published: 2024-03-28
I cannot find my model number or paper work only can sit o the faceplate that it's a delta Moniter I believe it is a 1500 and in need of a new cariti
What part is needed just to change the caritidged? Will milo get mix water temp needs to be replaced! Please help!
Hi Rich, Thank you for your question!
Your tub/shower unit is a 1500 series. The 1500 series valve cartridge is discontinued and has been replaced with the 1700 series RP32104 valve cartridge. You may also need a new bonnet nut RP22734.
Best regards,
Brandis
Date published: 2024-03-28
Will this cartridge replace existing cartridge in my Monitor tub-shower valve with stenciled numbers Asse1016P Delta located on brass cartridge retainer cap??
Thank you for your question, DrRIB! Unfortunately, the bonnet nut is not specific to a certain model. Please compare the cartridge to the original and let us know if you need any help identifying the replacement part.
https://www.deltafaucet.com/search-results?searchTerm=cartridge+assembly#resultPage=0&offset=0
Best regards, Jon
Date published: 2024-03-28
Replacement cartridge for older model 1700 from 2002
Replacing older model 1724PB-LHP installed in 2002 which was in new construction. Found my receipt from 2002. Don't know which type of rough in valve was used as I did not see it when installed. Didn't intend to replace the rough in valve or cut into walls...only wanted to replace the exterior escutcheon, temp/pressure handles and the shower head and arm. I was advised that T17278-RB trim kit would work but not to use the cartridge with gray cap that came with it. Cartridge package is marked 46878 REV A 10/11/05. I would have to use my old cartridge. As far as I can tell it appears to have a white cap. Which one do I use so that I don't have any rehab work behind the wall. Or, can I continue to use the old cartridge as long as it works. I viewed video which includes instructions for 13/14 series and 1700 series and believe I need cartridge RP32104 with the white cap and longer tab at bottom for 1700 series shipped prior to 2006. Thank you
Hi Bea, Thank you for your question. The RP32104 is the correct cartridge to use with your 1700 series faucet from 2002. The T17278-RB trim will fit your existing faucet but the RP46463 cartridge that ships with the trim will not work with your existing rough in valve.
Thanks,
Dave
Date published: 2024-03-28
I have Delta Mulitchoice 13/14 series faucet the cartridge has gone bad, will a 1700 series cartridge work in this body?
Hi Dave, Thank you for your question. The RP46463 cartridge will fit the rough in valve body from your Delta mutichoice 13/14 series faucet. You will also need a 17 series valve only trim to make the faucet function properly. The 17 series cartridge will come with the new trim.
Thanks,
Dave
Date published: 2024-03-28
I have the Delta series 1700 that uses the cartridge 32104 . What are the other part numbers or letters that I need to complete the rest of the unit. It just seems that no one can answer me on this question. Please help thx
Thank you for your question, Raul! An original 1700 series Delta shower does use the RP32104 cartridge. This cartridge can be used with any of our current T17 trim kit options to complete your unit; however, please note that current trim kits will include a Multichoice 17 series cartridge that will not fit into the original 1700 series valve body and you must continue using the RP32104 cartridge.
https://www.deltafaucet.com/bathroom/bathing/tub--shower-faucets?ValveType=Dual-function+pressure+balance+cartridge&ValveType=Dual-function+thermostatic+cartridge
Best regards, Edward
Date published: 2024-03-28
My house was built in 1980 and I am sure this shower off'/on is the original. I can fix quite a few things but I am afraid if I turn off the water and the parts I need, need to be ordered, is there a way to close it back up until I get the new parts?????
Thank you for your question, KATHIE! RP32104 was not an available part at that time. Below the handle on the escutcheon plate, there may be a series number printed which will indicate the correct parts needed. All series and models can have the parts re-inserted in the event that they will need to be ordered. Please contact us directly if you need assistance finding the correct parts.
Best regards, Edward
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.