Delta®
Abrazadera de conexión rápida, cocina no DST desplegable y extensible
N.º de modelo: RP32522
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
Chuck from
Quick delivery
The Delta RP32522 part was exactly what I needed. Old part was worn to the point where the clip did not close firmly, resulting in very bad leak. Prior to putting the new clip on, I cleaned the valve shank (using steel wool--very fine 0000) to remove mineral deposits. Also replaced the valve shank's O-ring (which is included with the RP32522 clip). Thanks FaucetDirect!
Date published: 2016-08-14
Rated 5 out of
5
by
Jacksgal from
Just what we needed!
The repair parts were just what was needed to replace/repair our kitchen sink water hose.
Date published: 2015-05-28
Rated 5 out of
5
by
oldgreyguy from
Faucet parts.
Worked perfectly after I figured outcorrect positioning. Selection and diagrams were a terrific resource. Delivery was much speedier than espected. Well done, and thank you!!!
Date published: 2010-05-10
Rated 5 out of
5
by
bruno765 from
Excellent Service
I am grateful that I was able to locate and purchase the part that I needed to make the necessary repairs to my faucet without having to replace it.
Thanks for carrying hard to get parts. I received the part in a couple of days,problem solved.
Once again thanks.
Date published: 2009-11-17
Rated 5 out of
5
by
sandijean from
Quick mailing
As this was a part needed for the repair of our kitchen faucet, we could not use the faucet without it. We were very pleased with the receipt of the part sooner than expected so we could get our faucet working again!! Great customer service.
Date published: 2009-07-26
Rated 5 out of
5
by
kyleinNYC from
the clip that does it all
Without this clip the faucet was useless. Finding the correct clip on your website was better than the hours spent at the local plumbing supply or big chain stores which didn't have it or needed to order it! Thanks. General Contractor Kyle. in NYC. 2009
Date published: 2009-05-29
Rated 2 out of
5
by
Anonymous from
Not the same
It was much thinner that the original piece.
Date published: 2008-11-02
Preguntas y respuestas
How do I disconnect the joint this clip holds? To remove without having to cut/destroy existing pipe and/or hose.
Hi, Fish4kiks!
Thank you for your question. To remove the Delta RP32522 hose clip, pull the tab straight off. This will release the connection at the hose.
Best Regards,
Rosanna
Date published: 2024-03-28
how do I install this connector
Thank you for your question, wally! The RP32522 quick connect clip is pressed into the brass fitting at the end of your non-DST pullout hose to connect it to the faucet. Attach the hose by firmly pushing onto the faucet outlet at the back of the valve until it clicks. The information you are looking for is found on page 3, step 7 of the guide below.
https://media.deltafaucet.com/MandI/92630%20Rev%20A.pdf
Best regards, Edward
Date published: 2024-03-28
paaret rp32522
need diagram and info on where to install part. cannot find faucet model # but know it is 5-10 years old
Hi gram,
Thank you for your question. The RP32522 quick connect clip is pressed into the brass fitting at the end of your non-DST pullout hose to connect it to the faucet. Attach the hose by firmly pushing onto the faucet outlet at the back of the valve until it clicks. I will include a link below to a model that also uses this connection. The information you are looking for is found on page 3, step 7 of this guide.
https://media.deltafaucet.com/MandI/92630%20Rev%20A.pdf
Best regards,
Edward
Date published: 2024-03-28
How do I reconnect the hose to the faucet outlet. I can’t seem to get in a good position under the sink to push up to connect the hose and the outlet
Hi, Kevin.
Thank you for your question. The Delta RP32522 hose clip will push straight onto the end valve and hose connection. Pull down on the hose to make sure the clip is securing the connection.
Best Regards,
Rosanna
Date published: 2024-03-28
How to remove clip without breaking to change hose.
Thank you
Hi Rich,
Thank you for your question. To remove the clip, press one of the flat ends at the top with your thumb while pulling it away from the hose on the other side.
Best regards,
Jon
Date published: 2024-03-28
How to install??
Hello Autumn,
Thank you for your question. We are happy to help! The RP32522 quick connect clip is pressed into the brass fitting at the end of your non-DST pullout hose to connect it to the faucet. Attach the hose by firmly pushing onto the faucet outlet at the back of the valve until it clicks. The information you are looking for is found on page 3, step 7 of the guide below.
https://media.deltafaucet.com/MandI/92630%20Rev%20A.pdf
Please reach out directly if you have any questions or need additional assistance.
Best regards,
Bryan
Date published: 2024-03-28
I have the old quick connect clip that I need to replace
What is the O-ring included with the quick connect clip (item no. RP32522) used for? Does it go on one of the hose fittings or on the threaded pipe connected to the faucet? Do you sell that O-ring, or can you tell me its type and size?
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.