Conjunto de válvula de extremo, bañera tipo romana, R2707/ R4707

Thank you for your question. Operationally the faucet will work if you switch the hot and cold supply lines. However, your handles will then work backwards. Typically, hot is on the left and cold is on the right. As long as the bathers know the difference, there is not a potential to scald anyone.

Than you for your inquiry, Analiza4444! The Delta Roman tub End Valve Assembly RP40510 can be used for hot or cold water handle installation. Best regards, Tanya

Hi Daniel, Thank you for your question. Delta® Non-Electronic Lifetime Faucet and Finish Limited Warranty All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home. Delta recommends using a professional plumber for all installation and repair. Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. Replacement parts may be obtained by calling 1‑800‑345‑DELTA (3358). If your faucet meets the above criteria the parts will be covered under the warranty. Thanks, Dave

Thank you for your question! The valve should be installed with the long corrugated tube toward the spout and the supply tube on the outside. The stem should be oriented with the raised plastic piece to the right and the brass stem facing away from the spout. The brass stem can be turned by hand. To flip the stem unit around completely, ensure that the water supply is turned off, then unscrew the bonnet nut, pull out the stem and rotate it 180 degrees. Please refer to the installation guide for your rough-in valve for more information. Best regards, Jon

Thank you for your question. Included here is a link the installation instructions for the R4707 which includes the RP40510. http://www.deltafaucet.com/customersupport/documentation/r4707.html?document=mi&documentIndex=0#flashWrapper

Hello Customer! Thank you for your question and we are happy to help. The Delta RP40510 does not have a replacement valve option. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

Hello Charley, Thank you for your question. We are happy to help! The Delta Faucet R4707-MF would be installed with PEX cold expansion only. Unfortunately, we do not currently have an adapter for PEX crimping. We apologize for any inconvenience this causes. Best regards, Bryan

Hello JanB, Thank you for your question! I am happy to assist you! The recommended rough-in valve for the Delta Faucet model T2759-BL is the R2707. You can purchase parts and products online, locally, or over the phone. Please see our Where to Buy page for help finding dealers in your area or online. Please contact us back directly with any further questions. Best Regards, Skyler