Michael Graves™

Tornillo de fijación

Name: Set Screw
Brand: Delta
SKU: RP40650
Price: 4.80 USD
Rating: 5 (3 reviews)

N.º de modelo: RP40650

Agregar a favoritos

Busque instaladores locales de Delta®

Michael Graves™

Tornillo de fijación

N.º de modelo: RP40650

Precio de lista: $6.00

Precio en línea: $4.80

Envíos sin cargo para todos los pedidos de más de $49

Cantidad

Agregar a favoritos

Busque instaladores locales de Delta®

Documentos y especificaciones

Información de instalación

Altura total:

3/16

Voltaje:

Tipo de válvula:

RESEÑAS

Rated 5 out of 5 by syed from fitts perfectly i bought this product 2 weeks ago and its great i save buch $$ for not calling plumber

Date published: 2021-02-14

Rated 5 out of 5 by Asif from Great product Great stuff fita well very happy with this one

Date published: 2021-02-07

Rated 5 out of 5 by Windspirit from Awesome Customer Service Awesome customer service. Rep helped me identify the exact parts I needed and saved me a bundle by only replacing two small parts rather than the entire handle - which is what showed as available online. Will definitely shop with these folks again. Highly recommended.

Date published: 2012-07-03

Preguntas y respuestas

Is this a common set screw size that might be located in a local hardware store?

Asked by: Rick

Hi Rick, Thank you for your question! The RP40650 set screw size is .250-28. It is possible fo find the part locally. Below is the " where to buy" link: http://www.deltafaucet.com/where-to-buy/index.html Best regards, Brandis

Answered by: DeltaFaucet7

Date published: 2024-03-28

just bought a new delta faucet for the kitchen and when i started to install it couldn't find the set screw for the faucet. The model number is rp40650 was wondering if you knew the size of the screw and could i possibly find one compatible at lowes

Asked by: Eric

Hi, Eric! Thank you for your question. The Delta RP40650 set screw size is .250-28. Best Regards, Rosanna

Answered by: Delta Faucet

Date published: 2024-03-28

Do I need a special tool for the Delta set screw or can I use a regular hex key?

Asked by: Mike P

Hi Mike, Thank you for your question! This set screw will take a standard 1/8" hex key. Thanks, Jon

Answered by: DeltaFaucet3

Date published: 2024-03-28

Hello I have a Pilar 4380-SD-DST faucet which needs to have the handle cartridge replaced. There was so much corrosion around the set screw that when I tried to unscrew it I stripped it. Any suggestions on how to loosen it beside drilling it out. 

Asked by: Spuds

Hello Spuds! Thank you for your question. Please try soaking it with a 50/50 white vinegar and water solution for about 1 hour. This will help dissolve mineral buildup. Best Regards, Shontay

Answered by: DeltaFaucet7

Date published: 2024-03-28

What size Allen wrench does RP40650 use?

Asked by: BobK

Hi BobK, thank you for your interest in the RP40650! The screw uses a standard 1/8" hex key. Please contact us directly if you have any questions or need additional assistance. Best Regards, Themar Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

I have a Delta Gooseneck Faucet with separate handle for running water. The set screw was stripped and I was able to get it out. I now need a new one. I see three listed on the website it looks like the rp40650. Are they all standard in size. not sure one

Asked by: Sclo2022

Hi Sclo2022, thank you for your interest in the RP40650! The set screws are model specific. The screw is compatible with 9178-DST. Please contact us directly if you have any questions or need additional assistance. Best Regards, Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

I have 16955-SD-DST Victorian single handle pull down, will this screw going to fit of I need to different one? The one I have is stripped and looking for replacement part;

Asked by: Scott

Hi Scott, Thank you for contacting Delta Faucet Company! Our 16955-SSSD-DST uses RP47666 set screw for the handle. The RP40650 is shorter, so it may not attach properly. https://media.deltafaucet.com/PartsDiagram/DPD-K-955-DST%20Rev%20C.pdf We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

Answered by: Customer Service

Date published: 2024-03-28

What are the dimensions of this set screw please?

Asked by: Jason

Hi Jason, Thanks so much for contacting Delta Faucet Company! The Set Screw MODEL#: RP40650 size is .250-28. Please reach out with further questions! Best Regards, Kelley Digital Communications Specialist

Answered by: Customer Service

Date published: 2024-03-28

Preguntas sobre RP40650 - página 2

Tornillo de fijación

Información de instalación

Is this a common set screw size that might be located in a local hardware store?

just bought a new delta faucet for the kitchen and when i started to install it couldn't find the set screw for the faucet. The model number is rp40650 was wondering if you knew the size of the screw and could i possibly find one compatible at lowes

Do I need a special tool for the Delta set screw or can I use a regular hex key?

Hello I have a Pilar 4380-SD-DST faucet which needs to have the handle cartridge replaced. There was so much corrosion around the set screw that when I tried to unscrew it I stripped it. Any suggestions on how to loosen it beside drilling it out.&nbsp;

What size Allen wrench does RP40650 use?

I have a Delta Gooseneck Faucet with separate handle for running water. The set screw was stripped and I was able to get it out. I now need a new one. I see three listed on the website it looks like the rp40650. Are they all standard in size. not sure one

I have 16955-SD-DST Victorian single handle pull down, will this screw going to fit of I need to different one? The one I have is stripped and looking for replacement part;

What are the dimensions of this set screw please?

Hello I have a Pilar 4380-SD-DST faucet which needs to have the handle cartridge replaced. There was so much corrosion around the set screw that when I tried to unscrew it I stripped it. Any suggestions on how to loosen it beside drilling it out.