Palo®
Conjunto de manguera, desplegable
N.º de modelo: RP44647
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Documentos y especificaciones
Soporte para productos, repuestos y especificaciones técnicas
Información de instalación
Overall Height (in.) :
59
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
MSD95337 from
Super fast delivery
Worked perfect!
Date published: 2013-07-02
Rated 3 out of
5
by
neveragain from
Substituted product
The original hose was stainless steel links and this is some kind of nylon. I wanted to replace what I had but was forced to buy this substitute because they didn't carry the good hoses. Not happy, but I had to have SOMETHING!
Date published: 2013-06-25
Rated 5 out of
5
by
Anonymous from
Replacement Pullout Hose
Straightforward installation, no leaks.
Date published: 2013-01-09
Rated 5 out of
5
by
h0wdyd00dy from
Speedy Gonzales
This was my 3rd time replacing this hose. It is a great improvement over the old metal braided hose which I thought would last forever twice. (wrong)This replacement is a braided material that is flexiable and quietier when pulling out as well as retracting than the old metal one. Shipping was super fast. It arrived faster then I could say Speedy Gonzales! I'm not the reviewing type of person unless its super worth it and the shipping was quick. (now where's my free gift) just kidding.....
Date published: 2011-09-24
Rated 5 out of
5
by
Happyhose from
Faucet hose
After I finally figured out this was a special part, after visiting every store in town, it was an easy order, delivery, and install. Works great!
Date published: 2011-04-19
Rated 4 out of
5
by
fixitnow from
It was the right place to go!
With several very similar options available I was not sure which one would fit the my faucet. I had already bought one that didn't at a local store. Using the on line chat I could confirm what was the right one. Got it within the promissed time and had no trouble intalling it.
Date published: 2010-10-14
Rated 5 out of
5
by
BlueDevil2 from
Great, but...
Make sure you can use your existing O-Ring or order a new one.
Date published: 2010-07-22
Rated 5 out of
5
by
SPG321 from
Replacement hose
This hose is superior to the OEM part that came with the faucet. However, the clip provided does not work with the faucet stem, but I worked around by attaching 2 gear clamps to the hose and all is right in the world again....i.e. happy wife.
Date published: 2010-01-01
Rated 5 out of
5
by
Onthelake from
Simple Solution
This product appears as though it will hold up better than the original piece that came with the faucet. It was easy to install and the description on the website helped us identify the exact product that we needed to make our repair...
Date published: 2009-11-11
Rated 5 out of
5
by
Parella from
Just what I needed
I was able to look the item up on their site and did not have the model number but I was able to enlarge the product to look to see that the attachments at the end would fit on my sink and it did. And most importent it that I did not have to wait for a man to get her done!!!!! :)
Date published: 2009-07-25
Rated 5 out of
5
by
MRNyboer from
Made my wife very happy, the right part and installed fine.
Thanks for your service!!
Date published: 2009-01-01
Preguntas y respuestas
Installation of RP44647 hose assembly
Experiencing the same problem that Greg has stated. The newly designed coupling is too long to make the tight radius curve of the faucet. Turning the faucet holder either to the right or left DOES NOT work.
Can the hose be cut and reassembled with an inserted tube and band clamps? Anything to get this blasted thing to work !!!
Suggestions are appreciated.
Hi Cheryl, Thank you for your question. When you get to the point where the hose is getting hung up try twisting the hose while applying pressure to help guide the hose through the opening.
Thanks,
Dave
Date published: 2024-04-01
Is the hose braided and stainless?
Hi CallJoll, Thank you for your question.
The RP44647 hose assembly is a braided vinyl hose. It is not stainless metal.
Best Regards,
Rosanna
Date published: 2024-03-28
Which Hose
Which is the correct hose for model 470-wd-dst faucet, RP44647 or RP32527?
Hi Bostwick,
Thank you for your inquiry! The Delta RP74608 is the hose assembly listed for the Delta Signature Pull-Out Kitchen 470-WH-DST faucet.
https://media.deltafaucet.com/PartsDiagram/DPD-K-470-DST.pdf
Best regards,
Tanya
Date published: 2024-03-28
What is the difference with hose RP50390 and RP44647
Hi Eric, Thank you for your question. The RP50390 is the pull out hose assembly for our Diamond Seal Technology (DST) pull out and pull down faucets. The RP44647 is the pull out hose assembly for our non-DST pull out and pull down kitchen faucets. The end that connects to the faucet on each model is different.
Thanks,
Dave
Date published: 2024-03-28
Replacement for broken clip?
The clip broke during a repair. Where can I find a replacement clip?
Hi Cherlyn, Thank you for your question!
You will need the RP32522 clip. You can click on the " where to buy" link below for authorized online and local dealers.
http://www.deltafaucet.com/where-to-buy/index.html
Best regards, Brandis
Date published: 2024-03-28
Installing replacement hose RP44647
I received the RP44647 to replace the original hose that was leaking. I was unable to pull the old hose through the faucet after disconnecting it from the valve shank and the spray head without cutting the old hose.
Now I am unable to feed the new hose through the faucet without getting hung up on the two copper intake tubes!
Any suggestions?
Hi Greg,
Thank you for your question. We are sorry that you are experiencing difficulties with your faucet. We suggest that you move your spout 90 degrees to the left or right to facilitate threading the new hose through the hub of the faucet.
Thanks,
Dave
Date published: 2024-03-28
I am replacing the hose on kitchen faucet MD 474-SS
I can not get the hose to disconnect from the faucet spray head.
I un screwed the nut but it just wont let go. I have tried pulling on it no help.
Is there some kind of release or some type of a "keeper" ring that needs to be released in order for the hose to come out??
Thanks,
Bob
Hi Bob, Thank you for your question. Once the threaded portion of the hose is unscrewed there is not anything holding the wand onto the hose on your model 474-SS faucet. It sounds like the o-ring at the end of the hose has dried out and will not slide out easily. Try twisting and turning as you pull to remove the wand.
Thanks,
Dave
Date published: 2024-03-28
Which faucets will fit Rp44647?
Thank you for your question, Dkcody26! The RP44647 hose is a non-DST pull-out/pull-down hose. The DST faucets were introduced in 2007 and the easiest way to tell the non-DST vs the DST faucets is by the supply lines. The DST faucets will have gray pex/plastic lines that run out of the faucet to the water shut off valves. The non-DST faucets will generally have copper tubing coming out of the faucet.
Best regards, Edward
Date published: 2024-03-28
Información especial
ADVERTENCIA de la Proposición 65 de California
ADVERTENCIA DE LA PROPOSICIÓN 65 de California
Este producto puede exponerle al plomo, que según el estado de California causa cáncer y anomalías congénitas u otros daños reproductivos.
Para obtener más información, visite http://www.P65Warnings.ca.gov.
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.