Delta®

Protector de enlucido

N.º de modelo: RP46075
Agregar a favoritos
Busque instaladores locales de Delta®
Delta®
Protector de enlucido
N.º de modelo: RP46075
Precio de lista: $540
Agregar a favoritos
Busque instaladores locales de Delta®
Documentos y especificaciones
RESEÑAS
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getReviews, 5ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = 'ERROR', msg = 'Not Found.'; Unsuccessful GET. status = 'ERROR', msg = 'Not Found.';
Preguntas y respuestas

is the Plaster Guard necessary?

Plumber put screws in wrong holes and cracked plaster guard that came with shower set. Is it necessary for installation? will be tiling, DIY job, not pro tiler.
Asked by: TXMAMA
Hi, TXMAMA! Thank you for your question. The plaster guard, RP46075, is not necessary after you install the valve body. The plaster guard works as a template to know how big your hole size should be and how far the stringer to finished wall is. Best Regards, Rosanna
Answered by: Rosanna
Date published: 2016-11-07

Will this work with the MultiChoise Universal Valve?

My father threw the box away by accident, and the plasterguard was inside. I need a plasterguard to replace it, but I am not sure this is compatible with the Multichoice Universal Valve I installed.
Asked by: Chris
Hi Chris, Thank you for your question. The RP46075 is the plasterguard used with the R10000 multichoice universal rough. Thanks, Dave
Answered by: DeltaFaucet2
Date published: 2024-03-28

I have lost the plasterguard for a Delta R11000 3-6 way rough in valve. Delta gives part number RP46075 but the dimensions you give for that look like dimensions for the mixer valve plasterguard, about 4" square rather than 3" square.Isit right for R11000

Asked by: Robert
Hi Robert, thank you for contacting Delta Faucet Company! The R11000 plasterguard is approximately 3"x3" inches whereas the R10000 plasterguard is about 4"x4". Please note the plasterguard is not meant to measure hole size. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Answered by: Customer Service
Date published: 2023-03-08

what are the outside dimensions of the plaster guard? I am missing mine and need to know the opening size I need to cut in the backer board.

Asked by: Duceman
Hi Duceman, Thank you for your question about the Delta Faucet RP46075 Plasterguard. We will be happy to assist you as quickly as possible. The plasterguard is a 4" square. See the specification sheet for more information: https://media.deltafaucet.com/SpecSheet/dsp-b-r10000_J.pdf If installing without the plasterguard, the distance from the stringer to the finished wall should be between 2.5" and 3". Please contact us directly if you have any questions or need additional assistance. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist
Answered by: Customer Service
Date published: 2024-03-28

is there a version of this part (RP46075) with both mounting holes (for the trim kit) at the bottom?

Asked by: jjim
Hello, jjim! Thank you for contacting us at Delta Faucet! I apologize for this information not being available to you and I understand how frustrating that can be but I will be happy to help! Unfortunately, this Delta Faucet model RP46075 is no longer available and we do not currently offer one with mounting holes located at the bottom. We apologize for any inconvenience this may have caused. Please contact us directly if further assistance is needed at this time.  We appreciate your loyalty to Delta Faucet Company. Best Regards, Tim
Answered by: Delta
Date published: 2024-03-28

My plasterguard has one of the two black clips, broken off (and not even in the box) when I opened box for near term installation. Part RP46075. When I called Delta customer service, they were of no help. I'd simply like a replacement sent out. Thanks.

Asked by: Tom a customer

I am replacing a worn out cartridge on a delta monitor 17 series shower tub valve body. I broke the original plaster guard. I looked for a replacement online, and found your site. However, it said this part was discontinued. Now what??

Asked by: Doc plumber
Hi Doc plumber, Thank you for your question! Please accept our sincere apology for the inconvenience you are experiencing. Here is the information needed to resolve your issue for you. Unfortunately, the Delta Faucet Plasterguard MODEL#: RP46075 is no longer available and we do not currently offer one with mounting holes located at the bottom. We apologize for any inconvenience this may have caused. Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us directly for further assistance. Best Regards, Kelley
Answered by: Customer Service
Date published: 2024-03-28

Does plasterguard mount flush to back of wall or align flush to the front,shower side Should the square cutou be the same size as plasterguard

Asked by: Steve1940
  • y_2025, m_4, d_2, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_RP46075, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_deltafaucet
  • bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
  • CLOUD, getContent, 69ms
  • questions, product
* El precio real puede variar, y lo determina el minorista/mayorista/distribuidor que vende el producto.