Tapón de prueba de presión, agua caliente/fría

Hi Max74, Thank you for your question regarding our Delta Faucet RP46079. The Delta RP46079 is a Hot and Cold water Pressure Test plug. To install this plug, make sure water supplies are shut off. Then install the plug in the cold water opening/hole, inside of the valve body. Then install the test cap and bonnet. This will prevent the cold water from flowing into the valve, so that you can check the hot water pressure coming into the valve. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

Hello OMALE, Thank you for your question! I am happy to help you! The Delta RP46079 is used to test the hot and cold, I have included steps below. Prior to testing, remove cover, bonnet and cap. Ensure O-ring is properly installed. Reinstall cap and bonnet and tighten securely. Plug both outlets with proper fittings. Turn on the hot and cold water and check for leaks. After testing remove shower and/or tub spout plug and flush system. After flushing and reinstall cap, bonnet and cover. Please see the install guide for more information. https://images.homedepot-static.com/catalog/pdfImages/9d/9da94fa6-9890-40a6-981f-8071d98d4ae0.pdf Please contact us back for any further questions. Best Regards, Nicole

Hi Neil, thank you for contacting Delta Faucet Company! Please shut the water supplies off. Install the plug in the cold water opening/hole, inside of the valve body. Then install the test cap and bonnet. This will prevent the cold water from flowing into the valve so that you can check the hot water pressure coming into the valve. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist