Delta®
Button - Hot / Cold Indicator - Finished in Chrome
N.º de modelo: RP50786
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
7/16
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
greg7 from
Falls out.
The original kept falling out and finally disappeared, probably down the drain. I bought a replacement . . . which kept falling out, and then disappeared, probably down the drain. Buy a third one? At these prices I think I can live with the ugly crusty hole. Or buy a new faucet. I hear Waterstone is nice.
Date published: 2024-10-24
Rated 1 out of
5
by
T R J from
Junk
It broke before 2 years was up. It never even gets used as it just sits in the little slot. It's junk!
Date published: 2024-09-27
Rated 2 out of
5
by
James from
Button indicator
The button has recently fallen off and would not fit tightly on the set screw. Well it finally has fallen off and went into the garbage disposal. On line I see that this part is over $20 and that seems ridiculous. It doesn’t fit properly and if you replace it the cost is extreme. Not sure if the warrant will replace the button. Love the faucet though!
Date published: 2022-12-24
Rated 5 out of
5
by
Roldroyd from
Delta Kitch faucet hot/cod indicator, part #RP5078
The item has worked well since I purchased it several weeks ago. The item hasn't fallen out since being installed unlike the original that came with the faucet when we purchased it last year. It would continually fall out onto the counter.
Date published: 2022-07-03
Rated 1 out of
5
by
Cathy Kerrigan from
Delta Hot/Cold Button Does Not Install
Whoever designed this button is a terrible engineer. Did they ever actually try to install themselves? It may look great on paper but it does not install into the set screw hole. The button is also so small that it is difficult to hold on to. I recommend buying a brand of faucet that does not require you to put the finishing touches on their faucet. My highly rated plumber could not even get the button to press into the set screw hole.
Date published: 2022-04-08
Preguntas y respuestas
Will the button fit my Delta handle (mod # 156-DST)
The button on my handle was blue/red plastic cap. The ones listed are chrome, stainless, etc. with a red/blue dot.
I need a replacement for the plastic cap that has been damaged. Will the new one shown as mod #RP50786 fit my older handle? I purchased my brushed stainless fixture in May 2007.
Thank you for your question. Delta Faucet model # 156-DST does have a red and blue button cover with the part # of RP50786 as a replacement. It can be ordered at your local retailer or wholesaler.
Date published: 2024-03-28
what is the purpose of the hot cold indicator button? Model#: 11949-SS-DST
Do I need to push the button in a certain direction to get hot or cold water?
Dear Jim,
Thank you for your question. The indicator button RP50786 is designed to cover the set screw in the handle and indicator which way the handle turns for the hot and cold water flow. This button is just a decorative piece, it does not control or affect the water flow at all.
Best regards,
Tanya
Date published: 2017-07-18
Will this fit a Delta 980T-DST
The replacement part for my faucet in the manual is listed as RP46781 which is no longer available. This is listed on the parts page online for my faucet. It looks nothing like the part now in my faucet. The dimensions are 3/16" tall by 1/2" wide. Thank you.
Hi Laura,
Thank you for your question. This is the correct button for the handle on the the 980T-DST.
Best regards,
Jon
Date published: 2024-03-28
Does this piece snap in? How is it installed? First piece fell out shortly after installation. Do you have any tips for successful instalaltion so that this piece doesn’t fall out again?
Hi, Karen!
Than you for your question. The Delta RP50786SS temperature indicator button pushes right into the set screw hole in the handle. The button will be completely installed when it is flush with the handle.
Best Regards,
Rosanna
Date published: 2024-03-28
I want to confirm that this button (fell out 2 weeks after install by the way) will fit in Bellini faucet.
Dear Disappointed in quality,
Thank you for your inquiry! Yes, the RP50786SS is the correct Red/Blue Indicator button listed for the Delta Bellini Kitchen 11946-SSSD-DST faucet.
Best regards,
Tanya
Date published: 2024-03-28
Hello, Will this piece fit the Savile pull down faucet (19949-SSSD-DST)? Thanks for your help.
Hi, Glenn!
Thank you for your question. The Delta RP50786SS Temperature Indicator Button is the correct button for the Delta 19949-SSSD-DST Faucet.
Best Regards, Rosanna
Date published: 2024-03-28
No question, just a comment. Indicator button has fallen off twice.Just paid $20 ea. for 2 more and because it is cheap plastic, one of them already has the pieces that hold it in place broken off just trying to push it into place. Really poor quality!!
Hi Beth,
Thank you for your feedback. I am sorry to hear that you are experiencing an issue with your Delta faucet button. If the button falls out, please contact our Delta Customer Service line at (800)345-3358. We will be happy to assist you with this. We are available Monday-Friday, 7am-7pm, CST and Saturday, 8am-5pm, CST. You may also email at customerservice@deltafaucet.com.
Best Regards,
Rosanna
Date published: 2024-03-28
Will this fit in model:9178-SP-DST faucet? Thank you!
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.