Spray Assembly - Pull-Down Kitchen in Chrome
N.º de modelo: RP51480
Image Thumbnail, click to view zoomed product image 
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
1
Caudal:
1.8 gpm a 60 psi, 6.8 l/min. a 414 kPa
Tipo de válvula:
NA
RESEÑAS
Rated 1 out of
5
by
Chelle from
Terrible
Same issues as others have stated! The faucet clogs frequently has to be cleaned with a vinegar solution. Mine also rusted, after which the entire faucet had to be replaced!
Date published: 2024-11-16
Rated 1 out of
5
by
Randy from
This faucet is terrible.
I had this faucet and all of a sudden no water pressure. Have been dealing with this for over a week. I'm soaking it in vinger and water like I seen on here to do. I will be calling in the morning for a replacement if this does not fix it. mine is less than 1 year old. Maybe 6 months.
Date published: 2024-03-02
Rated 4 out of
5
by
LoFlo from
Low water flow
I am suddenly experiencing low water flow from my faucet. It is currently soaking in 1:1 vinegar:water solution to hopefully remove the mineral deposits
Otherwise the faucet works as expected
Date published: 2024-02-02
Rated 2 out of
5
by
Monty from
Sprayer is junk
I had this faucet for over 2 years and I have been living with a spay nozzle that drips , clogs, sticks in different spray modes . I hate the way the magnet rusts the internal goose neck. I changed the magnet but it keeps falling out and not holding the nozzel. Also the touch light works but the tester will not come out unless I manually open the fauect. I am used to leaving the fauect handle in my preferred position for touch IQ and Alexa command. Why do the parts cost so much if they break?
Date published: 2023-08-05
Rated 1 out of
5
by
Texasgirl from
UGH this product is frustratingly not working!
I loved this faucet initially but after about a year the water pressure is so low. I clean it regularly but no improvement. The price on the replacement is so unreasonable. I might as well buy a whole new faucet.
Date published: 2023-03-30
Rated 3 out of
5
by
Kahuna from
Trouble with water flow!
The faucet-spray assembly is very susceptible to clogging, drastically reducing water pressure flow, from sediment in the city water. This is the 2nd time in 3 years this has happened and no solvent cleaner including a vinegar soak will clear up the clogged faucet head. The only way to resolve is to purchase and expensive replacement.
Date published: 2022-10-30
Rated 4 out of
5
by
Tom V from
sprayer hose hard to get through faucet
It took a couple of hours, but it works great.
Date published: 2022-07-03
Rated 3 out of
5
by
avoirdupois from
Long term maintenance issues
Having learnt that this spray head needs to be soaked frequently in a vinegar solution to counter the mineral build up inside that stops it switching fully from spray to stream, I now find that the iron ring that works with the magnet to hold the head in place is susceptible to rusting (not good for a water device). This was just a nuisance for a while but now the iron has rusted away completely, so the head is no longer held in place but just dangles. Sadly, it seems the only option is to replace the complete head, which is very expensive.
Date published: 2022-03-21
Preguntas y respuestas
Can the aerator be removed?
Hi, Jackie!
Thank you for your question. The Delta RP51480 sprayer assembly aerator is removeable. To remove the RP50815 aerator, use the aerator wrench, RP52217. Here are links to these parts:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP50815
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP52217
Best Regards,
Rosanna
Date published: 2024-03-28
I bought the "Leland" old model (without MagnaTite and Multi-Flow). This part fits on the old model?
Hi Racpty,
Thank you for your question! The older version of the Leland pull down faucet with the rotating spray mode selector is RP46751.
http://www.deltafaucet.com/repairparts/details/rp46751.html
Thanks,
Jon
Date published: 2024-03-28
How do you disassemble to clean for low flow?
Hi Matt, Thank you for your question. Your faucet would have came with a small blue T-shaped wrench that will allow you to remove the aerator from the RP51480 wand assembly. Check the supply lines under the sink for the wrench as it can clip onto the pex supply lines. If you need the wrench it can be ordered as part of RP50815.
http://www.deltafaucet.com/repairparts/details/rp50815.html
You can soak the wand assembly in a 50/50 solution of vinegar and water to help clean the mineral build up, be sure to rinse when done.
Thanks,
Dave
Thanks,
Dave
Date published: 2024-03-28
How does this come apart for cleaning?
Thank you for your question, Gary6557! A Delta wand is not designed to be taken apart and does not have any repair parts available. It can be removed from the pull down hose to check the debris screen on the back for sediment. Please contact us directly if you have questions or need further assistance with this part.
Best regards, Edward
Date published: 2024-03-28
How do I install the sprayer assembly with hose?
I received a new RP51480SP replacement for a leak that I am having. I turned off the water, took the clip off between the hose assembly and water line, and removed the old one. When I try to put the new one through the faucet surround it gets stuck around the area where the "friction spacer" is. How do I get the new hose to go all the way down?
Dear Zack,
Thank you for your question. To install the hose assembly, you make need to remove the spout arm from your faucet body, then install the hose through the spout and then down the faucet body opening.
https://media.deltafaucet.com/PartsDiagram/DPD-K-9178-DST.pdf
Best regards,
Tanya
Date published: 2024-03-28
What size O-rings inside
After about 1 year of use, I soaked the wand assembly in a vinegar solution to remove buildup, and after that, the spray select mechanism has started to fail. When i press the button to select spray, some water still drips out the aerator. When I press the button for the aerator, some water still drips out the spray ports. I believe replacing the o-rings on the spray select mechanism inside this assembly would help, but i need to know the part number or specs of the o-ring. Thanks.
Hi Sean, Thank you for your question. Unfortunately we do not offer the internal components of the 51480SS wand assembly as separate items. The entire wand will need to be replaced.
Thanks,
Dave
Date published: 2024-05-30
Is there a spray head for a Leland 978-DST rated at 2.2gpm and what is the rp number. Thanks.
Hi, John13!
Thank you for your question. The RP51480RB Sprayer Assembly has a 2.2 gpm flow rate.
Best Regards, Rosanna
Date published: 2024-03-28
Need a replacement wrench to fix this item
When the plumber installed my Delta faucet, he neglected to give me the " small blue T-shaped wrench that will allow you to remove the aerator from the RP51480 wand assembly". I would like to acquire a replacement wrench so that I can clean the screens.
Hi Ray, Thank you for your question. The wrench for the RP51480SS wand assembly is available to order as part of RP50815.
Thanks,
Dave
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.