Delta®
Tapón de desagüe - Baño en cromado
N.º de modelo: RP5648
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
This pop-up style drain stopper works with most lift rod type drain systems.
- Multiple finishes available.
- Dual loop to accommodate various depth drain assemblies.
- May be installed removable or non-removable.
Documentos y especificaciones
Información de instalación
Overall Height (in.) :
5
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
Anonymous from
sink stopper delivered
the right part with the delivery on time and it works just like the original.
Date published: 2024-04-08
Rated 5 out of
5
by
Will from
Just What I Needed
The part was packaged very well from Delta and arrived quickly. The stopper looked great and fit in my drain after a little filing down. Very happy with my purchase!
Date published: 2024-04-06
Rated 5 out of
5
by
nrowe from
mrowr
It was exactly as I had imagined and installed as well. Very glad to find the part I needed . Thanks for the good service.
Date published: 2011-08-27
Rated 3 out of
5
by
loeyd from
True Delta Part??
I found this same generic part at the local hardware store for less after shipping, but didn't get it because I was looking for a true Delta part that said "Delta" on it (so it would match the other sink). I kept it, put it in a bathroom with a single sink, and moved the matching Delta one to the 2-sink bathroom. It looks fine, just was looking for a real match.
Date published: 2011-04-16
Rated 5 out of
5
by
Grizzly from
Worked great/saved $
Went to several stores trying to replace this part and was told I needed to replace the entire assembly!!! All generic replacement parts didn't fit. This part wasn't expensive and fit perfectly. Thanks.
Date published: 2010-05-03
Rated 5 out of
5
by
WhoCares1 from
Install With Your Eyes Closed
Looks great and could not be easier to install and maintain.
Date published: 2009-12-09
Rated 5 out of
5
by
faucetfixer from
Simple and elegant
Consistent quality and simply constructed...
Date published: 2009-07-25
Preguntas y respuestas
is this the drain stopper that is 1 1/4 inch in diameter? i see the two holes, i assume they are 4 and 5 1/4 in long?
Hi, Mwilliams43!
Thank you for your question. The diameter of the Delta RP5648 Stopper Assembly measures 1 3/8". The two holes in the stopper assembly are measured at 4" and 5".
Best Regards, Rosanna
Date published: 2024-03-28
CAN YOU BUY THE RUBBER GASKET BY ITSELF FOR THE RP5648 STOPPER
Hi Bill,
Thank you for your question. Unfortunately, the gasket is only sold as part of the stopper.
Thanks,
Jon
Date published: 2024-03-28
Do you sell or even make drain replacement drain stoppers that say "Delta" on them?
Thank you for your question, Julie! Our drain assembly stoppers no longer have the Delta logo printed on them. We apologize for any inconvenience this may cause.
Best regards, Edward
Date published: 2024-03-28
is this the stopper that would be used with 520PBWF faucet; if not which should I order
Hi BB,
Thank you for your question. You will want to order the RP5648BB. That will match the brass finish on the 520PBWF faucet.
Thanks,
Dave
Date published: 2024-03-28
I have a stopper that is longer 5 1/4 inches long with only 1 loop whole. Is it a different part # ?
Thank you for your question, George! This stopper will work with any standard Delta pop-up assembly. It has been re-designed, so the original may have had a single loop.
Best regards, Jon
Date published: 2024-03-28
How do I install the drain stopper #rp5648
Thank you for your question, Larry! You will need to star by sliding the stopper into the flange. Next, you would need to go underneath the sink, and connect the horizontal rod to the opening at the bottom of the stopper. Hand tighten pivot nut to the horizontal rod, attach horizontal rod to strap using clip. After that is done, connect the top of the strap to the lift rod. I have included a link to a parts diagram, for you to refer to. If you need further assistance, feel free to contact us directly.
https://media.deltafaucet.com/PartsDiagram/RP26533_Pop_Up_Drain.pdf
Best Regards, Benjamin
Date published: 2024-03-28
Is this the only Delta popup Drain Stopper available?
I have a classic one lever ("crystal" knob lever-my model shows that it is discontinued) bathroom faucet that needs a new popup drain stopper. I found a replacement but the picture only shows one opening at the bottom for the "adjustment rod" to be attached through. My "good" stopper has 2 openings at the bottom for the "adjustment rod" to go through. Will this one opening popup stopper work in my drain?
Thank you for your question. Delta Faucet model # RP5648 does have a double loop at the bottom. The picture is incorrect. Thank you for bringing it to our attention so that we can get it fixed.
Date published: 2024-03-28
whate size is RP5648 drain stopper? what size drain hole with accomodate this drain??
Hi Becky, Thank you for your question!
Below is the technical specification on the RP26533 pop up drain that uses the rp5648 stopper.
http://www.deltafaucet.com/customersupport/documentation/522.html?document=ts&documentIndex=0#flashWrapper
Best regards,
Brandis
Date published: 2024-03-28
What are the dimensions of RP5648? I tried the link, provided by Brandis, but it went to a general Service & Parts page. I'm looking for the diameter and height of the stopper.
Hello Bob H,
Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". This stopper will have two loops, with one at 4" and on at 5".
Best regards,
Tanya
Date published: 2024-03-28
We have Cassidy polished nickel faucet and drains. Does this come in polished nickel? Is another finish term the same as polished nickel? If not what should purchase?
Hi, Dennis Mac!
Thank you for your question. We no longer have the RP5648 available in the Polished Nickel finish. We do have the RP26533 in Polished Nickel, if needed. Here is a link to the unit:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533PN
Best Regards,
Rosanna
Date published: 2024-03-28
is this stopper 1 3/8" by 5"?
Hi Ron, Thank you for your question. The RP5648SS stopper does measure 1-3/8" x 5".
Thanks,
Dave
Date published: 2024-03-28
I have a stopper that has a stopper cap (the part plugging up the drain) that is only 1.25" in diameter. The four flanges that go down into the drain must be smaller than usual, because I've picked up a couple of universal-sized kits and they're toogbih
Hello Robin,
Thank you for your inquiry! The Delta Stopper assembly RP5648PT is designed to work with the RP23060PT flange.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23060PT
Best regards,
Tanya
Date published: 2024-03-28
My drain stopper #RP5648 in polished brass has a single white plastic open loop at the base. It measures 4" in length., Your RP5648BP looks like grey plastic and it has a different configuration @ the base. Will it fit my drain?
Thank you for your question, Lorrie! Yes, this can replace models with a single loop. Simply install the horizontal rod through the top hole. You may need to adjust the location of the rod on the strap as well.
Best regards, Jon
Date published: 2024-03-28
Can a 2 hole stopper replace a 1 hole stopper?
My faucet has a one hole stopper that looks like the RP5648BN. However, my faucet is chrome. And the chrome finish stopper RP5648 has 2 holes and does not look like my stopper. Should I get a slightly different looking stopper or a slightly different looking finish? Will the 2 hole stopper even work if my sink currently uses a 1 hole stopper? If not, will a stopper in a brilliance brushed nickel finish go with my chrome faucet?
Hi DB, Thank you for your question. The RP5648 when ordered as a replacement part will always have the 2 holes.This stopper is used in multiple drain types, some of which use the 1 hole and some that use the 2 holes. If you currently have a 1 hole you will need to cut off the 2nd hole to work with your drain assembly. The stopper has an indicator of where to cut.
Thanks,
Dave
Date published: 2024-03-28
What is the correct pop up stopper replacement for Model 2578 Series - 42487 2 handle lavatory centerset faucets? Thank you.
Thank you for your inquiry, Jenn! The stopper assembly RP5648RB should work with the Leland Lavatory 2578 faucet plastic pop-up assembly.
http://www.deltafaucet.com/repairparts/details/rp5648.html
Best regards,
Tanya
Date published: 2024-03-28
how do replace the cap only? The one we have screws on and the remainder to the stopper stays in the drain.
Hi ps,
Thank you for your question. We do not recommend to remove the cap from the stopper. In some installations, you will first need to remove the horizontal rod to take out the stopper. Simply loosen the nut on the back of the drain, pull out the horizontal rod then lift out the stopper.
Best regards,
Jon
Date published: 2017-02-15
We have the Vessona 25925-RB, will this stopper fit that faucet?
Hi Jen,
Thank you for your question! This stopper will work with the pop-up assembly from the 25925-RB.
Thanks,
Jon
Date published: 2024-03-28
What is the diameter of the stopper?
Thank you for your question. The diameter of the cap is 1.35".
Date published: 2024-03-28
I have this Trinsic set in matt black. The stopper broke, I need a replacement. But you don't have this color listed anymore. How do I get a replacement?
Hi, Thank you for contacting us.
We apologize for any inconvenience. We are more than happy to help you.
To place an order for you, we would like to gather some more information first. Could you please provide a date of installation.
Please contact us at 1-800-345-3358 if you have any further concerns. We are open Monday through Friday 7:00 AM to 7:00 PM central time, and 8:00 AM to 5:00 PM on Saturday.
Best Regards,
Bethany
Date published: 2024-03-28
What is the proper drain for 792-ss-dst faucet?
Hello Becky, Thank you for your question!
The 792-SS-DST single handle vessel lavatory faucet does not include a pop up drain. You can choose from any vessel bowl drain such as our RP6346SS.
http://www.deltafaucet.com/repairparts/details/rp6346ss.html
Best regards,
Brandis
Date published: 2024-03-28
Laura J
Can the Drain Stopper model RP5648CZ be used for a bathtub?
Dear Laura J,
Thank you for your question. The Delta Lavatory Drain Stopper RP5648CZ, is too small to fit into a standard bathtub drain.
Best regards,
Tanya
Date published: 2016-10-15
Does this stopper say Delta on the top of the stopper?
All of my bathroom sinks have Delta faucets and drain stoppers, I'd like to replace the drain stoppers. The current drain stoppers say Delta on the top of the stopper and I'd like to replace them with ones that also say Delta on the top. The picture shown does not show that it says Delta on the top.
Dear Smaddox,
Thank you for your question. The Delta Drain Stoppers RP5648 no longer carry the Delta name on them.
Best regards,
Tanya
Date published: 2017-08-30
does this work with adiwon single fct 792-ss-dst
Hi, Marianne!
Thank you for your question. The Delta RP5648BN Stopper Assembly will not fit with the Delta 792-SS-DST Faucet as the stopper will need a lift rod to operate, which the faucet does not. We recommend a push pop up drain assembly such as the 72173-SS. Here is a link to this option:
https://www.deltafaucet.com/parts-product-detail?modelNumber=72173-SS
Best Regards, Rosanna
Date published: 2024-03-28
Delta Stopper 1 3/8 by 4"
The part I have to replace looks exactly like that, except it's 4" long, not 5" long. What would be the correct part number?
Hi N,
Thank you for your question. The stopper for our plastic pop-up assemblies are 4" long. This stopper will have two loops, with one at 4" and on at 5".
Thanks,
Jon
Date published: 2024-03-28
Is this a standard drain part
Hello Ray,
Thank you for your question about the Delta Faucet RP5648 Drain Stopper - Bathroom In Chrome. I apologize for any difficulty finding this information. I know that can be frustrating. We are happy to help!
Yes, this is the replacement stopper for our standard pop-up drain assemblies.
Please reach out at customerservice@deltafaucet.com or 1-800-345-DELTA if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer.
Best regards,
Bryan
Date published: 2024-03-28
Where can I get a matte black version of this drain stopper? We have a matte black faucet, but cannot find the replacement part.
Hi Malory,
Thanks for your question regarding RP5648! This model is not available in Matte Black.
Please feel free to contact us with any questions or for further assistance.
Best Regards,
Emma
Digital Communications Specialist
Date published: 2024-03-28
Do you make a stopper that is 5-1/2” long?
Hi MC confused,
Thanks so much for contacting Delta Faucet Company!
No, this will be the only available stopper. However, we do offer the RP101630 push pop-up assembly for sinks without overflow holes and the RP101632 for sinks with overflow holes. Please see the following links for more information.
https://www.deltafaucet.com/parts/product/RP101630PC.html
https://www.deltafaucet.com/parts/product/RP101632PC.html
Please reach out with further questions!
Best Regards,
Tim
Digital Communications Specialist
Date published: 2024-03-28
My current Delta stoppers are cloudy and scratched (2 years old). Are these solid metal or plastic with a chrome coating? Is the Stainless Brilliance solid metal or do you have a better quality replacement?
Hello JT00!
Thank you for your question and we are happy to help! The Delta Drain stopper model RP5648 is made of several materials which may include but are not limited to Bronze, Brass, Zinc, Stainless Steel, Copper, PEX-C, Silicon, Synthetic rubber, Vinyl, Nylon, and, Plastics. The Brilliance® Finishes have been tested against over 100 household cleaners and withstand repeated scouring with steel wool without damage.
We recommend making sure that all cleaning and care procedures are followed as the wrong type of cleaner may remove the protective clear coating of the finish and that is where you would begin to see finish damage.
With any further questions or concerns, please do not hesitate to reach out to us directly. Thank you for being a loyal Delta customer.
Best Regards,
Carrie
Date published: 2024-03-28
I have a Trinsic 559-LF-BLMPU matte black faucet. I need a new stopper, but the options do not include matte black. Can you advise?
Hi Walter7747,
Thank you for contacting Delta Faucet Company. Please accept our sincere apology for the inconvenience you are experiencing. We will be happy to assist you in resolving this issue as quickly as possible.
The correct part is the Brizo Faucet Drain Stopper - Lavatory Model#: RP5648BL. Parts can be purchased online or locally.
Thank you for being a loyal Delta Faucet customer. We look forward to continuing to serve you. Please feel free to contact us back for further assistance.
Best Regards,
Kelley
Date published: 2024-03-28
Can someone tell me the overall length of this and the diameter of the top
Hello Bill,
Thank you for your question. I apologize for any difficulty finding this information. We are happy to help!
The Delta Faucet part number RP5648 drain stopper measures 1-3/8" across the top and is 5" long.
We appreciate your business and look forward to continuing to serve you!
Best regards,
Bryan
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.