Delta®
Tapón de desagüe - Baño en Champagne Bronze
N.º de modelo: RP5648CZ
Image Thumbnail, click to view zoomed product image 
CARACTERÍSTICAS DEL PRODUCTO
This pop-up style drain stopper works with most lift rod type drain systems.
- Multiple finishes available.
- Dual loop to accommodate various depth drain assemblies.
- May be installed removable or non-removable.
Características especiales
Acabado Brilliance®
Acabado Brilliance®
Muchos productos de Delta se fabrican con acabados Brilliance®, que resisten el desgaste y la decoloración mejor que el bronce tradicional o incluso el cromo.
Documentos y especificaciones
Información de instalación
Altura total:
5
Voltaje:
0
Tipo de válvula:
NA
RESEÑAS
Rated 5 out of
5
by
Anonymous from
sink stopper delivered
the right part with the delivery on time and it works just like the original.
Date published: 2024-04-08
Rated 5 out of
5
by
Will from
Just What I Needed
The part was packaged very well from Delta and arrived quickly. The stopper looked great and fit in my drain after a little filing down. Very happy with my purchase!
Date published: 2024-04-06
Rated 5 out of
5
by
nrowe from
mrowr
It was exactly as I had imagined and installed as well. Very glad to find the part I needed . Thanks for the good service.
Date published: 2011-08-27
Rated 3 out of
5
by
loeyd from
True Delta Part??
I found this same generic part at the local hardware store for less after shipping, but didn't get it because I was looking for a true Delta part that said "Delta" on it (so it would match the other sink). I kept it, put it in a bathroom with a single sink, and moved the matching Delta one to the 2-sink bathroom. It looks fine, just was looking for a real match.
Date published: 2011-04-16
Rated 5 out of
5
by
Grizzly from
Worked great/saved $
Went to several stores trying to replace this part and was told I needed to replace the entire assembly!!! All generic replacement parts didn't fit. This part wasn't expensive and fit perfectly. Thanks.
Date published: 2010-05-03
Rated 5 out of
5
by
WhoCares1 from
Install With Your Eyes Closed
Looks great and could not be easier to install and maintain.
Date published: 2009-12-09
Rated 5 out of
5
by
faucetfixer from
Simple and elegant
Consistent quality and simply constructed...
Date published: 2009-07-25
Preguntas y respuestas
Laura J
Can the Drain Stopper model RP5648CZ be used for a bathtub?
Dear Laura J,
Thank you for your question. The Delta Lavatory Drain Stopper RP5648CZ, is too small to fit into a standard bathtub drain.
Best regards,
Tanya
Date published: 2016-10-15
What are the dimensions of RP5648? I tried the link, provided by Brandis, but it went to a general Service & Parts page. I'm looking for the diameter and height of the stopper.
Hello Bob H,
Thank you for your question. The threaded portion of the flange is 1 3/8" and the top surface diameter is 2 1/8". This assembly should work with a 1 1/2" diameter drain. However, the depth of the hole must be 1 5/8" to 2 3/8". This stopper will have two loops, with one at 4" and on at 5".
Best regards,
Tanya
Date published: 2024-03-28
We have Cassidy polished nickel faucet and drains. Does this come in polished nickel? Is another finish term the same as polished nickel? If not what should purchase?
Hi, Dennis Mac!
Thank you for your question. We no longer have the RP5648 available in the Polished Nickel finish. We do have the RP26533 in Polished Nickel, if needed. Here is a link to the unit:
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP26533PN
Best Regards,
Rosanna
Date published: 2024-03-28
How do you remove the stopper to clean the drain?
I have attempted to rotate the stopper while open and it does not disengage from the lever arm.
Yes, a stopper does have to be removeable in order to clean the gunk that collects on the underside of the stopper and underneath. Delta Customer Service by phone says that although the tailpipe is connected to the lift rod assembly, this stopper can indeed be twisted off in the sink for cleaning purposes. Either Delta has changed the design since a rep answered this question a while back, or CS is wrong. Need to know before purchasing!
Date published: 2024-03-28
is this stopper 1 3/8" by 5"?
Hi Ron, Thank you for your question. The RP5648SS stopper does measure 1-3/8" x 5".
Thanks,
Dave
Date published: 2024-03-28
I have a stopper that has a stopper cap (the part plugging up the drain) that is only 1.25" in diameter. The four flanges that go down into the drain must be smaller than usual, because I've picked up a couple of universal-sized kits and they're toogbih
Hello Robin,
Thank you for your inquiry! The Delta Stopper assembly RP5648PT is designed to work with the RP23060PT flange.
https://www.deltafaucet.com/parts-product-detail?modelNumber=RP23060PT
Best regards,
Tanya
Date published: 2024-03-28
I need to order this stopper as i have double sinks but lost one, my current one says delta in the middle, the one pictured doesn't is that correct?
Hi Becca, Thank you for your question. You are correct that the RP5648 stopper does not have "Delta" on the stopper. Unfortunately none of our current drain assemblies or stoppers have Delta on them.
Thanks,
Dave
Date published: 2024-03-28
Is the washer/gasket on the Delta Drain Stopper replaceable or must one purchase the entire stopper?
Thank you for your question, Gene! At this time there is not a separate part number for the washer/gasket on Delta Faucet model #RP5648. The entire stopper will need to be ordered. Please feel free to contact our Homeowner/Warranty experts at 800-551-1508.
Date published: 2024-03-28
Precios de Delta en línea
Este precio en línea es exclusivo de DeltaFaucet.com. El precio de lista puede aparecer en productos ofrecidos fuera de la sección de la tienda outlet en DeltaFaucet.com. Pueden usarse precios tachados para mostrar descuentos.